프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Smolmux MCP

제작자: magnusmalm버전 0.5.2i★ 2 (저장소 전체의 별)i–저장소 ↗
레지스트리 이름io.github.magnusmalm/smolmux-mcp

설치 방법

What it does

Serial console MCP server over a smolmux broker: shared UART, send/expect, history, boot stages.

  • Connects –
  • Account or key No key needed
  • Category 기타

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수12/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

검사 3/3 통과 · 내 컴퓨터에서 실행돼요

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude는 아직 Smolmux MCP에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

ChatGPT는 아직 Smolmux MCP에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

대신 이렇게 할 수 있어요

B · 기타에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code는 아직 Smolmux MCP에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

Cursor는 아직 Smolmux MCP에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

VS Code는 아직 Smolmux MCP에 연결할 수 없어요

제작자가 아직 MCP 레지스트리에 설치 방법을 올리지 않았어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Smolmux MCP을 쓰는 사람에게 물어보세요💬 토론 →

한눈에 보기

GitHub 스타i
2 (저장소 전체의 별)
이 저장소에는 MCP 항목이 여러 개 있어 별은 순위에서 한 번만 세요
주간 다운로드i
npm/PyPI에 없음
연결 방식
–
최신 버전i
0.5.2
카테고리i
기타
레지스트리 공개i
2026년 10월 5일
코드 마지막 변경i
2026년 10월 22일
제작자
magnusmalm
웹사이트
github.com
레지스트리 상태
활성

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 magnusmalm 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 28일 전

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/magnusmalm-smolmux-mcp.svg)](https://mcp.popnx.com/en/servers/magnusmalm-smolmux-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 20653개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 20653개 중 50%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 20653개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Smolmux MCP, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 28일 전 변경됐고, 최신 버전(0.5.2)은 지난달 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

제작자: koala73널리 사용됨★ 9.1만3일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

제작자: openstatusHQ널리 사용됨★ 9.3천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

제작자: Klavis-AI성장 중★ 5.8천14개월 전 업데이트

클라우드에서 실행저장소 보관됨✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

제작자: jitsucom널리 사용됨★ 5.1천4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · jitsu.com
비슷한 항목과 비교
이 항목
Smolmux MCP
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/44/44/41/44/4
라이선스MITAGPL-3.0AGPL-3.0MITApache-2.0MIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

smolmux

A portable C11 device multiplexer. Holds a device connection open (serial UART, GDB stub) and multiplexes access to multiple clients over Unix sockets using newline-delimited JSON.

Single static binary, low latency, small footprint - built for daily serial and GDB bring-up on Linux.

New here? docs/START-HERE.md is a one-screen router - find your intent (run it, bring up a new board with an AI agent, understand the architecture, hack on the code) and it points you to the right doc.

One port, three clients

One broker holds an ESP32-S3's UART. The monitor (top) watches it live. In the bottom pane a script sends temp and gets the reply on the same wire, resets the board and waits for its prompt, then esptool reads the flash ID through with-port: the broker suspends, esptool runs, the broker resumes, and the monitor never loses the port.

Example: probe an unknown board

One broker holds SWD; smolmux-gdb-mcp runs `probe_unknown_board`. On a SAM C21 Xplained Pro that path decoded Cortex-M0+ from CPUID, named the part via SAM DSU DID, rejected a false STM32 match, and wrote a starter *.gdb-profile.json. Tools, register values, and profile shape: docs/demo-samc21-probe-transcript.md.

Day-to-day serial (multi-client, U-Boot break-in, flasher handoff): docs/daily-driver.md.

Features

  • Serial UART, GDB MI, and serial-over-TCP (telnet + RFC2217) device links via vtable polymorphism
  • Multiple concurrent clients over Unix sockets with role-based access (observer/controller/takeover)
  • Expect engine - concurrent regex matching on the device byte stream with timeouts
  • Anomaly detection - pattern-based crash/error detection with cooldown and incident tracking
  • Output history - timestamped ring buffer for replay by late-joining clients
  • Structured logging - JSONL I/O log + human-readable text log with rotation (the I/O log records everything sent to and from the device, including anything typed at a login prompt — it is created 0600 under your private state directory, and smolmux refuses to write it through a symlink or to a file owned by another user)
  • Network sinks - TCP and WebSocket for remote access (loopback by default). The wire protocol is cleartext, and any client that completes the handshake gets full control of the device — console writes, pins, BREAK, SysRq, GDB. On loopback without --auth-token, the broker generates a token into a 0600 file in $XDG_RUNTIME_DIR (or /tmp), so other local users and processes cannot connect; your own smolmux-monitor / smolmux-mcp read it automatically, and smolmux-cli token prints it. For remote use, keep the bind on loopback and reach it over an SSH tunnel or WireGuard rather than exposing the port; smolmux refuses to serve a non-loopback TCP bind with no --auth-token. --insecure-no-auth turns both protections off.
  • MCP servers - standalone smolmux-mcp / smolmux-gdb-mcp attach to a running broker; optional in-process --mcp sink for single-process stdio
  • Boot tracking & autoresponder - ordered boot stages, stall events, standing expect->send rules
  • Autoboot interrupt - broker-side key flood (and optional DTR/RTS reset) for bootdelay=0 U-Boot
  • Device profiles / board manifests - JSON configs for prompts, anomalies, multi-wire boards
  • Auto-reconnect - exponential backoff recovery on USB-serial disconnect
  • Build-time feature selection - Kconfig-based; UART-only builds carry no GDB/TCP/WebSocket code

Quick start

Prerequisites: Linux, a C11 compiler, CMake 3.21+, Python 3 with kconfiglib (the configure step generates the feature header with it). libpcre2-8 is optional; without it regex matching falls back to POSIX.

# Debian/Ubuntu

sudo apt install build-essential cmake python3 python3-pip libpcre2-dev pip install kconfiglib # or in a venv; Debian's system Python may need

--break-system-packages

cmake -B build && cmake --build build -j$(nproc)

./build/smolmux /dev/ttyUSB0

Connect a client:

# Needs a running broker (above). Auto-discovers the socket from the port name.

./build/smolmux-monitor /dev/ttyUSB0

Day-to-day workflows (profiles, logs, U-Boot break-in, multi-wire boards): docs/daily-driver.md. Intent router: docs/START-HERE.md.

Build

cmake -B build && cmake --build build -j$(nproc)   # Default (all features)

ctest --test-dir build # Run tests

Feature profiles
cp configs/defconfig.minimal .config && cmake -B build    # UART only, no sinks/watcher

cp configs/defconfig.uart .config && cmake -B build # UART + MCP sink + watcher cp configs/defconfig.embedded .config && cmake -B build # Embedded target profile cp configs/defconfig.full .config && cmake -B build # Everything (GDB, TCP, WS, MCP, watcher)

Or toggle features directly:

cmake -B build -DSM_ENABLE_GDB=OFF -DSM_ENABLE_SINK_WS=OFF

Developer benchmarks (e.g. the output coalescer harness) are off by default:

cmake -B build -DSM_BUILD_BENCH=ON && cmake --build build --target bench_coalesce

Interactive configuration:

cmake --build build --target menuconfig
Static builds
cmake -B build -DSM_MUSL_STATIC=ON    # Fully static musl binary (zero runtime deps)

cmake -B build -DSM_STATIC=ON # Static linking (except glibc)

Usage

smolmux <port> [options]

Options: -b, --baud Baud rate (default: 115200) -s, --socket Unix socket path -l, --log-dir I/O log directory (default: $XDG_STATE_HOME/smolmux or ~/.local/state/smolmux) -t, --text-log-dir Text log directory -p, --profile Device profile JSON file --board Group this wire under a board (for discovery) --role This wire's role on the board (console, swd, ...) --gdb Use GDB MI link instead of UART --gdb-path Path to gdb binary (default: gdb) --gdb-target GDB target (e.g., localhost:3333) --serial-tcp Connect to a serial-over-TCP device server (ser2net, socat, terminal server; telnet + RFC2217 baud/DTR/RTS/break control) --mcp Enable in-process MCP stdio sink (prefer standalone smolmux-mcp against a daemon broker for daily use) --tcp-port Enable TCP sink (default: 5555) --tcp-bind TCP bind address (default: 127.0.0.1) --auth-token Require token in hello from TCP clients (prefer env SMOLMUX_AUTH_TOKEN - hidden from ps) --auth-token-file Read the token from a file --insecure-no-auth Serve TCP/WS with no token. Without it, a loopback listener gets a generated token (0600 file; smolmux-cli token prints it) and a non-loopback --tcp-bind is refused. --ws-port Enable WebSocket sink (default: 5556) --no-text-log Disable text log --no-io-log Disable JSONL I/O log --no-reconnect Don't auto-reconnect on disconnect --wait-device Wait for the device path before open --gdb-allow-shell Permit GDB shell/python/eval (off by default) --list-ports List available serial ports and exit --list-profiles List available device profiles and exit --help-protocol Show wire protocol documentation -v, --verbose Enable debug logging -V, --version Show version -h, --help Show this help

Wire protocol

Newline-delimited JSON over Unix sockets (also TCP/WS sinks). Binary data is base64-encoded. Message set covers session control, expect, history, anomaly, boot stages, autoboot flood, and autoresponder.

Full reference: ./build/smolmux --help-protocol (always matches this binary).

Client -> Broker: hello, send, send_expect, takeover, release, status, pin_control, set_baud, suspend, resume, history_request, incidents_request, configure_anomaly, interrupt_autoboot, configure_autoresponder, autoresponders_request

Broker -> Client: welcome, output, input_echo, expect_result, status_response, error, history_response, incidents_response, anomaly, autoboot_result, boot_stage, boot_stall, autoresponders_response, autoresponder_fired, suspended, resumed, link_down, link_up

Example session:

-> {"type":"hello","name":"my-tool","role":"controller","protocol_version":1}

<- {"type":"welcome","broker_version":"x.y.z","protocol_version":1,"port":"/dev/ttyUSB0","baud":115200,"your_role":"controller"} -> {"type":"send","id":"1","data":"dW5hbWUgLWEK"} <- {"type":"output","data":"TGludXggNC4xOS4w...","timestamp":1709654321.123}

Architecture

┌───────────┐  ┌───────────┐

│ uart link │ │ gdb link │ <- device-facing, compiled in/out via Kconfig └─────┬─────┘ └─────┬─────┘ │ │ ▼ ▼ ┌──────────────────────────────┐ │ smolmux core │ <- epoll event loop, message bus, │ history · logging · anomaly │ role enforcement, expect engine └──┬───────┬───────┬───────┬───┘ │ │ │ │ ▼ ▼ ▼ ▼ ┌──────┐┌─────┐┌─────┐┌──────┐ │ unix ││ tcp ││ ws ││ mcp │ <- sinks, also compiled in/out │socket││sink ││sink ││ sink │ └──────┘└─────┘└─────┘└──────┘

See DESIGN.md for full architecture documentation.

Dependencies

Required: cJSON (vendored, single file)

Auto-detected: PCRE2 (libpcre2-8). Used as the regex engine when present, because it bounds backtracking internally; the build falls back to POSIX ERE automatically when it is absent, so it is never required. Force either way with -DSM_ENABLE_PCRE2=ON (error if missing) or -DSM_ENABLE_PCRE2=OFF.

Core has zero *required* external dependencies beyond POSIX + cJSON.

Companion tools

  • smolmux-cli - command-line client (send commands, read output; with-port suspends the port, runs an external tool like a flasher, then always resumes)
  • smolmux-monitor - interactive terminal client with escape sequences (prefix key then a command; prefix defaults to Ctrl-], change with -e, e.g. -e esc or -e ^A)
  • smolmux-mcp - standalone MCP server: connects to a running broker and exposes serial tools (serial_send_command, serial_read, serial_boot_status, serial_add_autoresponder, ...). Alternative: broker --mcp sink embeds MCP in-process.
  • smolmux-gdb-mcp - standalone MCP server for GDB debugging: 21 tools over a broker holding a --gdb link - breakpoints, stepping, backtrace, name-labeled registers, memory, expression eval, fault-register decode (where the core has them), peripheral reads, gdb_interrupt, and unknown-board probing on ARM Cortex-M today (gdb_identify_target / gdb_generate_profile; other architectures are planned). Resources and prompts include smolmux-gdb://board-probing and probe_unknown_board. Built when

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요