World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
MTB and road cycling routes on real OpenStreetMap trails, saved as GPX with safety warnings.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 12/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
검사 3/3 통과 · 내 컴퓨터에서 실행돼요
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
Bicycle routes generator MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Bicycle routes generator MCP을 쓰고 있다고 하거나 답에 Bicycle routes generator MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Bicycle routes generator MCP에 연결할 수 없어요
Bicycle routes generator MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Bicycle routes generator MCP에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code는 아직 Bicycle routes generator MCP에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
A · Bicycle routes generator MCP에 연결되는 앱 쓰기
Cursor는 아직 Bicycle routes generator MCP에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
A · Bicycle routes generator MCP에 연결되는 앱 쓰기
VS Code는 아직 Bicycle routes generator MCP에 연결할 수 없어요
제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요
A · Bicycle routes generator MCP에 연결되는 앱 쓰기
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
레지스트리 이름이 GitHub 계정 Marc-Armillas 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 13일 전
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/marc-armillas-bicycle-routes-generator-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 13일 전 변경됐고, 최신 버전(0.5.0)은 31일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 MCPB도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 Bicycle routes generator MCP | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
English · Español
[⬇️ Download the Claude Desktop extension (bicycle-routes-generator-mcp.mcpb)](https://github.com/Marc-Armillas/bicycle-routes-generator-mcp/releases/latest/download/bicycle-routes-generator-mcp.mcpb)
Generates mountain bike and road cycling routes from a location and saves them as GPX with elevation. The track is computed by a routing engine (BRouter or OpenRouteService) on real OpenStreetMap trails and roads: neither the AI nor the application invents coordinates.
You can use it:
bicycle-routes generate "Casa de Campo, Madrid" --km 25 --type tracks.Every route comes with a summary (distance, climbing, maximum grade, % of pavement, dirt track and singletrack) and warnings: sections with motor traffic, grades over 12 %, protected areas, ways where bikes are not allowed and technical sections.
💾 GPX files go to `/tmp/bicycle-routes` by default. macOS empties
/tmpon restart and cleans
up old files, so copy the routes you want to keep (or set
BIKE_GPX_DIRto another folder).
⚠️ Always check the route on a map before riding. OpenStreetMap data may be incomplete
or out of date, and does not reflect temporary closures or every local regulation. Climbing
is computed from a digital elevation model (~90 m) and **may differ from what a barometric
watch or bike computer records** (often by 10-20 %); short ramps may be smoothed out.
.mcpb extension)bicycle-routes-generator-mcp.mcpb (always the latest release), or build it with npx @anthropic-ai/mcpb pack . dist/bicycle-routes-generator-mcp.mcpb./tmp/bicycle-routes by default) and a contact email (required by the OpenStreetMap/Nominatim usage policy). The other fields are optional.No need to install Python: this is a uv extension, so Claude Desktop downloads Python and the dependencies automatically the first time (it can take a minute). .mcpb is the successor of the .dxt format; older Claude Desktop versions that only support .dxt cannot run uv extensions.
Requirements: macOS, Windows or Linux with uv (it installs Python for you).
git clone <repository-url> bicycle-routes-generator-mcp
cd bicycle-routes-generator-mcp uv sync cp .env.example .env # and edit it
There are no keys or personal data in the code: everything is configured through environment variables (or a .env file in the folder you run the CLI from).
| Variable | Default | Purpose |
|---|---|---|
BIKE_GPX_DIR | /tmp/bicycle-routes | Folder where GPX files are saved. The app only writes here (and to its .bicycle-routes/ subfolder with cache and index). On Windows the default is the system temp folder. |
BIKE_CONTACT | — | Email or URL sent in the User-Agent. Recommended: required by Nominatim's policy. |
BIKE_ENGINE | brouter | brouter or ors. |
BIKE_BROUTER_URL | https://brouter.de | BRouter server (public or local, see below). |
ORS_API_KEY | — | Free OpenRouteService key if BIKE_ENGINE=ors. |
BIKE_PROTECTED_AREAS | 1 | Check protected areas with the Overpass API. |
BIKE_GARMIN_MCP_COMMAND | — | Only for --garmin in the CLI (see "Garmin"). |
BIKE_DATA_DIR | /.bicycle-routes | Where to keep the cache and index. |
uv run bicycle-routes generate "Casa de Campo, Madrid" --km 25 --type tracks --max-climb 500
uv run bicycle-routes generate "40.4242,-3.7559" --km 15 # coordinates work too uv run bicycle-routes generate "Casa de Campo, Madrid" --km 20 --end "El Pardo, Madrid" # point-to-point uv run bicycle-routes generate "Casa de Campo, Madrid" --km 30 --via "El Pardo, Madrid" --via "Aravaca, Madrid" # loop through via points uv run bicycle-routes generate "Madrid" --km 60 --type road # road bike uv run bicycle-routes generate "Casa de Campo, Madrid" --km 40 --seed 7 # another reproducible alternative uv run bicycle-routes generate "Casa de Campo, Madrid" --km 25 --json # JSON output uv run bicycle-routes list
Trail types (--type):
tracks: favours wide dirt tracks, little singletrack and no extreme ramps.mixed (default): general MTB.singletrack: more singletrack, less pavement.road: road bike. Paved roads with little traffic; warns about unpaved sections and only about busy roads (main roads or heavy estimated traffic), not ordinary secondary roads.Real example (abridged):
MTB Casa de Campo 38 km loop
Start: Casa de Campo, Madrid, Comunidad de Madrid, España Distance: 37.8 km · Climbing: +336 m / -338 m · Elevation 615–725 m Max grade: 10.3 % uphill, 13.3 % downhill Surface: paved 28.8 % · track 40.6 % · singletrack 30.6 % Engine: brouter (mtb) · candidates evaluated: 6 GPX: /tmp/bicycle-routes/mtb-casa-de-campo-38-km-loop-20261017-163919.gpx Warnings:
More examples with real output in docs/pruebas-reales.md (in Spanish).
The server exposes two tools:
generate_route(start, distance_km, max_climb_m?, trail_type?, loop=true, end?, name?, seed?, via?) → GPX path, summary and warnings. via is a list of places the route must pass through, in order (e.g. "a loop from Casa de Campo passing through El Pardo and Aravaca").list_routes() → saved routes.You: *"Make me a ~40 km MTB loop from Casa de Campo in Madrid."*
1. Claude calls the tool, choosing the arguments from your request:
generate_route({ "start": "Casa de Campo, Madrid", "distance_km": 40, "trail_type": "mixed" })
2. The MCP server computes the route on your computer (10-60 seconds):
40.424, -3.756.3. It returns this to Claude (real output, abridged; obtained with "seed": 2026 so it can be reproduced: without a seed every request gives a different loop):
{
"name": "MTB Casa de Campo 38 km loop", "gpx_file": "/tmp/bicycle-routes/mtb-casa-de-campo-38-km-loop-20261017-163919.gpx", "start": { "name": "Casa de Campo, Madrid, Comunidad de Madrid, España", "lat": 40.4241907, "lon": -3.755858 }, "summary": { "distance_km": 37.8, "ascent_m": 336, "descent_m": 338, "min_elevation_m": 615, "max_elevation_m": 725, "max_uphill_grade_pct": 10.3, "max_downhill_grade_pct": 13.3, "surface_pct": { "paved": 28.8, "track": 40.6, "path": 30.6, "unknown": 0.0 }, "warnings": [ { "kind": "traffic", "message": "0.3 km on roads with motor traffic in 1 section(s); ride carefully." }, { "kind": "traffic", "message": "Road with traffic (km 27.3–27.6).", "start_km": 27.32, "end_km": 27.61 }, { "kind": "grade", "message": "Steep descent over 12 % (max ~13 %, km 9.2–9.3).", "start_km": 9.22, "end_km": 9.34 }, { "kind": "general", "message": "Climbing and grades come from a digital elevation model (~90 m resolution)…" }, { "kind": "general", "message": "Route generated automatically from OpenStreetMap: check it on a map before riding…" } ] }, "engine": "brouter (mtb)", "activity_type": "mountain_biking", "candidates_evaluated": 6, "attribution": "Trail data © OpenStreetMap contributors (ODbL) — https://www.openstreetmap.org/copyright" }
4. Claude answers you in your language, with the summary and every warning. For example (illustrative, Claude's wording varies):
I've created a 37.8 km loop from Casa de Campo with +336 m of climbing: 41 % dirt
track, 31 % singletrack and 29 % paved. Watch out for 0.3 km on a road with traffic
(km 27.3–27.6) and a steep descent of ~13 % at km 9.2. Climbing comes from an elevation
model and may differ from your watch, so check the route on a map before riding.
GPX:
/tmp/bicycle-routes/mtb-casa-de-campo-38-km-loop-20261017-163919.gpx
From there you can keep going in the same conversation:
| You say | What Claude does |
|---|---|
| "Give me another option" | Calls generate_route again with a different seed |
| "Less climbing, at most 200 m" | Adds max_climb_m: 200 |
| "Make it pass through El Pardo" | Adds via: ["El Pardo, Madrid"] |
| "Now a 60 km road ride from Madrid" | Uses trail_type: "road" (paved, little traffic) |
| "Upload it to Garmin" | Calls the Garmin MCP server's upload_course with the GPX, if you have it installed |
| "What routes have I saved?" | Calls list_routes |
claude mcp add bicycle-routes-generator-mcp \
-e BIKE_GPX_DIR=/tmp/bicycle-routes -e BIKE_CONTACT=you@example.com \ -- uv run --directory /path/to/bicycle-routes-generator-mcp bicycle-routes-mcp
The .mcpb extension is the easiest option (see above). To configure it by hand instead: Settings → Developer → Edit config (claude_desktop_config.json):
{
"mcpServers": { "bicycle-routes-generator-mcp": { "command": "/absolute/path/to/uv", "args": ["run", "--directory", "/path/to/bicycle-routes-generator-mcp", "bicycle-routes-mcp"], "env": { "BIKE_GPX_DIR": "/tmp/bicycle-routes", "BIKE_CONTACT": "you@example.com" } } } }
Use the absolute path to uv (which uv on macOS/Linux, where uv on Windows), because Claude Desktop does not always inherit the terminal's PATH. Restart Claude Desktop.
manifest.json describes the extension (uv type, tools and configuration fields) and .mcpbignore keeps the tests, docs and your .env out of the package.
npx @anthropic-ai/mcpb validate manifest.json
npx @anthropic-ai/mcpb pack . dist/bicycle-routes-generator-mcp.mcpb python scripts/make_icon.py # only if you want to regenerate icon.png
version in manifest.json, pyproject.toml and src/bicycle_routes/__init__.py together. git tag v0.1.0
git push origin v0.1.0
Release GitHub Actions workflow runs the tests, builds bicycle-routes-generator-mcp.mcpb and attaches it to a new GitHub