프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

MCP Pear

제작자: MarvelNwachukwu버전 0.2.2i★ 1i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.MarvelNwachukwu/mcp-pear

설치 방법

What it does

MCP server for Pear Protocol: markets, positions, orders, portfolio, and gated trade execution.

  • Connects 내 컴퓨터에서 실행
  • Account or key Needs PEAR_API_KEY, PEAR_REFRESH_TOKEN · 1 setting to fill in (PEAR_ADDRESS)
  • Category 온라인 쇼핑몰 및 결제

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기4/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성3/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수7/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

MCP Pear 설치해 줘. https://mcp.popnx.com/i/marvelnwachukwu-mcp-pear.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

MCP Pear 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PEAR_ADDRESS) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server MCP Pear을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "pear": { "command": "npx", "args": [ "-y", "@marvelcodes/mcp-pear" ], "env": { "PEAR_API_KEY": "your-value", "PEAR_ADDRESS": "your-value", "PEAR_REFRESH_TOKEN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PEAR_API_KEY, PEAR_REFRESH_TOKEN, PEAR_ADDRESS에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 MCP Pear의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. MCP Pear에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • PEAR_ADDRESS PEAR_API_KEY에 연결된 지갑 주소(0x...). PEAR_API_KEY와 함께 필요합니다.
      영어 원문 보기Wallet address (0x...) bound to PEAR_API_KEY. Required alongside PEAR_API_KEY.

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  4. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  5. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "pear": {
          "command": "npx",
          "args": [
            "-y",
            "@marvelcodes/mcp-pear"
          ],
          "env": {
            "PEAR_API_KEY": "your-value",
            "PEAR_ADDRESS": "your-value",
            "PEAR_REFRESH_TOKEN": "your-value"
          }
        }
      }
    }

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  6. Claude를 끄고 다시 열기

  7. 해 보기

    MCP Pear을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 MCP Pear을 쓰고 있다고 하거나 답에 MCP Pear 도구 이름이 나오면 연결된 거예요

추가 설정 2개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • PEAR_JWT 멀티 테넌트 오케스트레이터용으로 미리 발급된 Pear JWT(JWT 패스스루 모드). 설정되면 바로 사용됩니다.
    영어 원문 보기Pre-minted Pear JWT for multi-tenant orchestrators (JWT pass-through mode). Used directly when set.
  • PEAR_TRADE_ENABLED 'true'로 설정하면 쓰기/거래 실행 도구가 활성화됩니다. 기본적으로 꺼져 있습니다.
    영어 원문 보기Set to 'true' to enable the write/trade-execution tools. Off by default.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 MCP Pear에 연결할 수 없어요

MCP Pear는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · MCP Pear에 연결되는 앱 쓰기

  • MCP Pear 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PEAR_ADDRESS) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • MCP Pear 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PEAR_ADDRESS) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • MCP Pear 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PEAR_ADDRESS) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • MCP Pear 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PEAR_ADDRESS) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

B · 온라인 쇼핑몰 및 결제에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

MCP Pear 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PEAR_ADDRESS) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server MCP Pear을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user pear --env PEAR_API_KEY=your-value --env PEAR_ADDRESS=your-value --env PEAR_REFRESH_TOKEN=your-value -- npx -y @marvelcodes/mcp-pear 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PEAR_API_KEY, PEAR_REFRESH_TOKEN, PEAR_ADDRESS에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 MCP Pear의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. MCP Pear에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • PEAR_ADDRESS PEAR_API_KEY에 연결된 지갑 주소(0x...). PEAR_API_KEY와 함께 필요합니다.
      영어 원문 보기Wallet address (0x...) bound to PEAR_API_KEY. Required alongside PEAR_API_KEY.

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  4. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  5. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user pear --env PEAR_API_KEY=your-value --env PEAR_ADDRESS=your-value --env PEAR_REFRESH_TOKEN=your-value -- npx -y @marvelcodes/mcp-pear

    Enter 전에 “your-value”를 내 키로 바꾸세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  6. Claude Code에서 /mcp 입력

    MCP Pear이 목록에 있고 연결됨으로 보이면 돼요

  7. 해 보기

    MCP Pear을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 MCP Pear을 쓰고 있다고 하거나 답에 MCP Pear 도구 이름이 나오면 연결된 거예요

추가 설정 2개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • PEAR_JWT 멀티 테넌트 오케스트레이터용으로 미리 발급된 Pear JWT(JWT 패스스루 모드). 설정되면 바로 사용됩니다.
    영어 원문 보기Pre-minted Pear JWT for multi-tenant orchestrators (JWT pass-through mode). Used directly when set.
  • PEAR_TRADE_ENABLED 'true'로 설정하면 쓰기/거래 실행 도구가 활성화됩니다. 기본적으로 꺼져 있습니다.
    영어 원문 보기Set to 'true' to enable the write/trade-execution tools. Off by default.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

MCP Pear 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PEAR_ADDRESS) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server MCP Pear을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "pear": { "command": "npx", "args": [ "-y", "@marvelcodes/mcp-pear" ], "env": { "PEAR_API_KEY": "your-value", "PEAR_ADDRESS": "your-value", "PEAR_REFRESH_TOKEN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PEAR_API_KEY, PEAR_REFRESH_TOKEN, PEAR_ADDRESS에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 MCP Pear의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. MCP Pear에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • PEAR_ADDRESS PEAR_API_KEY에 연결된 지갑 주소(0x...). PEAR_API_KEY와 함께 필요합니다.
      영어 원문 보기Wallet address (0x...) bound to PEAR_API_KEY. Required alongside PEAR_API_KEY.

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  4. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  5. 키 입력

    MCP Pear 설정에서 PEAR_API_KEY, PEAR_REFRESH_TOKEN, PEAR_ADDRESS가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  6. Cursor에서 AI 채팅을 Agent 모드로 열기

  7. 해 보기

    MCP Pear을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 MCP Pear을 쓰고 있다고 하거나 답에 MCP Pear 도구 이름이 나오면 연결된 거예요

추가 설정 2개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • PEAR_JWT 멀티 테넌트 오케스트레이터용으로 미리 발급된 Pear JWT(JWT 패스스루 모드). 설정되면 바로 사용됩니다.
    영어 원문 보기Pre-minted Pear JWT for multi-tenant orchestrators (JWT pass-through mode). Used directly when set.
  • PEAR_TRADE_ENABLED 'true'로 설정하면 쓰기/거래 실행 도구가 활성화됩니다. 기본적으로 꺼져 있습니다.
    영어 원문 보기Set to 'true' to enable the write/trade-execution tools. Off by default.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

MCP Pear 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PEAR_ADDRESS) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server MCP Pear을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "pear": { "type": "stdio", "command": "npx", "args": [ "-y", "@marvelcodes/mcp-pear" ], "env": { "PEAR_API_KEY": "your-value", "PEAR_ADDRESS": "your-value", "PEAR_REFRESH_TOKEN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PEAR_API_KEY, PEAR_REFRESH_TOKEN, PEAR_ADDRESS에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 MCP Pear의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. MCP Pear에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • PEAR_ADDRESS PEAR_API_KEY에 연결된 지갑 주소(0x...). PEAR_API_KEY와 함께 필요합니다.
      영어 원문 보기Wallet address (0x...) bound to PEAR_API_KEY. Required alongside PEAR_API_KEY.

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  4. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  5. 키 입력

    MCP Pear 설정에서 PEAR_API_KEY, PEAR_REFRESH_TOKEN, PEAR_ADDRESS가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  6. VS Code에서 AI 채팅을 Agent 모드로 열기

  7. 해 보기

    MCP Pear을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 MCP Pear을 쓰고 있다고 하거나 답에 MCP Pear 도구 이름이 나오면 연결된 거예요

추가 설정 2개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • PEAR_JWT 멀티 테넌트 오케스트레이터용으로 미리 발급된 Pear JWT(JWT 패스스루 모드). 설정되면 바로 사용됩니다.
    영어 원문 보기Pre-minted Pear JWT for multi-tenant orchestrators (JWT pass-through mode). Used directly when set.
  • PEAR_TRADE_ENABLED 'true'로 설정하면 쓰기/거래 실행 도구가 활성화됩니다. 기본적으로 꺼져 있습니다.
    영어 원문 보기Set to 'true' to enable the write/trade-execution tools. Off by default.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? MCP Pear을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user pear --env PEAR_API_KEY=your-value --env PEAR_ADDRESS=your-value --env PEAR_REFRESH_TOKEN=your-value -- npx -y @marvelcodes/mcp-pear

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "pear": {
      "command": "npx",
      "args": [
        "-y",
        "@marvelcodes/mcp-pear"
      ],
      "env": {
        "PEAR_API_KEY": "your-value",
        "PEAR_ADDRESS": "your-value",
        "PEAR_REFRESH_TOKEN": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "pear": {
      "command": "npx",
      "args": [
        "-y",
        "@marvelcodes/mcp-pear"
      ],
      "env": {
        "PEAR_API_KEY": "your-value",
        "PEAR_ADDRESS": "your-value",
        "PEAR_REFRESH_TOKEN": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "pear": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "@marvelcodes/mcp-pear"
      ],
      "env": {
        "PEAR_API_KEY": "your-value",
        "PEAR_ADDRESS": "your-value",
        "PEAR_REFRESH_TOKEN": "your-value"
      }
    }
  }
}

직접 입력할 값

  • PEAR_API_KEY 비밀 필수 env
    인증이 필요한 읽기/쓰기 도구용 Pear API 키(단일 사용자 모드). 공개 도구는 키 없이도 작동합니다.
    영어 원문 보기Pear API key for authenticated read/write tools (single-user mode). Public tools work without it.
  • PEAR_ADDRESS 필수 env
    PEAR_API_KEY에 연결된 지갑 주소(0x...). PEAR_API_KEY와 함께 필요합니다.
    영어 원문 보기Wallet address (0x...) bound to PEAR_API_KEY. Required alongside PEAR_API_KEY.
  • PEAR_JWT 비밀 env
    멀티 테넌트 오케스트레이터용으로 미리 발급된 Pear JWT(JWT 패스스루 모드). 설정되면 바로 사용됩니다.
    영어 원문 보기Pre-minted Pear JWT for multi-tenant orchestrators (JWT pass-through mode). Used directly when set.
  • PEAR_REFRESH_TOKEN 비밀 필수 env
    리프레시 토큰. 재시작 없이 서버가 만료된 JWT를 스스로 갱신하도록 합니다.
    영어 원문 보기Refresh token so the server refreshes an expired JWT itself instead of requiring a restart.
  • PEAR_TRADE_ENABLED env
    'true'로 설정하면 쓰기/거래 실행 도구가 활성화됩니다. 기본적으로 꺼져 있습니다.
    영어 원문 보기Set to 'true' to enable the write/trade-execution tools. Off by default.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
66/주
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.2.2
레지스트리 공개i
2026년 7월 19일
코드 마지막 변경i
2026년 7월 19일
제작자
MarvelNwachukwu
패키지
npm: @marvelcodes/mcp-pear
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 MarvelNwachukwu 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 4개월 전

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 @marvelcodes/mcp-pear@0.2.2 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/marvelnwachukwu-mcp-pear.svg)](https://mcp.popnx.com/en/servers/marvelnwachukwu-mcp-pear)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

온라인 쇼핑몰 및 결제 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 2919개 중 89%보다 스타가 많아요
  • 이 카테고리의 다른 서버 2919개 중 15%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 2919개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

MCP Pear, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: PEAR_API_KEY, PEAR_REFRESH_TOKEN

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 4개월 전 변경됐고, 최신 버전(0.2.2)은 4개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Stripe MCP, flightclaw, Trade It, Marketplace Ad Pros: Amazon Ads & Seller Central, idealo MCP Server

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Stripe MCP

MCP server integrating with Stripe - tools for customers, products, payments, and more.

제작자: stripe널리 사용됨★ 2.1천13개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · stripe.com

flightclaw

Search ~300 airlines and book flights with a checkout link. OAuth sign-in by email code.

제작자: flightclaw성장 중★ 862개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · flightclaw.com

Trade It

Connect brokerage accounts to AI assistants: holdings, orders, asset lookup, and approved trading.

제작자: trade-it-inc초기★ 6234일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · tradeit.app

idealo MCP Server

Search products, compare prices and discover deals across 6 European markets with your AI assistant.

제작자: idealo초기★ 286개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · mcp.idealo.com
비슷한 항목과 비교
이 항목
MCP Pear
Stripe MCPflightclawTrade ItMarketplace Ad Pros: Amazon Ads & Seller Centralidealo MCP Server
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요예아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요예아니요아니요아니요아니요
기본 점검3/34/44/45/54/44/4
라이선스MITMITMITCC0-1.0MITMIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

mcp-pear

The Pear Protocol MCP server for Hyperliquid pair trading — connect Claude, Cursor, or any AI agent to on-chain perps: browse pair markets, read positions and portfolio, and (opt-in) execute pair trades.

Model Context Protocol (MCP) server for Pear Protocol. Gives Claude, or any MCP-compatible agent, access to markets, pair ratios, positions, orders, trade history, portfolio, and (v0.2) full trade execution on Hyperliquid.

v0.2 adds trade execution. Ten write tools (open, close, and adjust positions; manage leverage and risk; cancel orders) are off by default behind PEAR_TRADE_ENABLED=true. Pear signs server-side, so mcp-pear never holds private keys.

What is Pear Protocol?

Pear is a Hyperliquid-backed perps platform for pair markets: long one basket against another. Every pair has a live ratio that moves as the legs diverge. More at pearprotocol.io.

Tools

Public (no auth):

  • get_health: API health and uptime
  • list_markets: browse pair markets with filters and pagination
  • get_active_markets: top gainers, losers, and highlighted pairs
  • get_pair_ratio: current ratio, 24h change, and funding for a specific pair

Authenticated read:

  • get_account_summary: your account header
  • get_open_positions: your open positions with PnL
  • get_open_orders: your open limit, TP, and SL orders
  • get_twap_orders: your active TWAP orders
  • get_trade_history: your closed trades with realized PnL
  • get_portfolio: bucketed PnL across 1d, 1w, 1m, 1y, and all-time
  • get_agent_wallet: the agent wallet Pear uses to sign your trades

Authenticated write (v0.2, gated behind PEAR_TRADE_ENABLED=true):

  • create_agent_wallet: create the agent wallet
  • open_position, close_position, close_all_positions: open and close pair positions
  • adjust_position, adjust_leverage: change size or leverage on a live position
  • set_risk_parameters: set or update TP and SL
  • cancel_order, cancel_twap_order: cancel pending orders

Full parameter reference in Tool reference. See Trade execution (v0.2) for the gate and Hyperliquid funding rules.

Install

# Run directly

npx -y @marvelcodes/mcp-pear@latest

Or install globally

pnpm install -g @marvelcodes/mcp-pear mcp-pear

Pin `@latest` (or a specific version) in the npx spec. Plain npx @marvelcodes/mcp-pear can launch a stale cached version: npx prefers its local cache over the npm registry when the spec is unpinned, so after a new release lands you may still be running the old one. @latest re-resolves against the registry each launch; pin like @0.2.0 instead if you want a frozen version. Stuck on an old version after upgrading? Clear the npx cache: rm -rf ~/.npm/_npx (macOS/Linux).

Getting an API key

For the authenticated tools, mint a key:

npx -y @marvelcodes/mcp-pear@latest setup

The CLI opens a browser, asks you to sign once with your wallet, mints a Pear API key, and (optionally) writes PEAR_API_KEY and PEAR_ADDRESS to a .env. Copy those two values into your Claude Desktop config and restart Claude.

Already have a JWT from app.pear.garden? Skip setup and use JWT pass-through below.

Configuration

Three auth modes. mcp-pear uses the first one whose env vars are set, decided on the first authenticated call.

Mode 1: JWT pass-through (multi-tenant orchestrators)

For Telegram bots and other orchestrators that mint JWTs externally (Privy, EIP-712, or any Pear-supported flow). The JWT is opaque; mcp-pear never calls /auth/login.

Env varRequiredDescription
PEAR_JWTyesPre-minted access token. Used directly when set. PEAR_API_KEY and PEAR_ADDRESS act as fallback if the JWT expires and no PEAR_REFRESH_TOKEN is configured.
PEAR_REFRESH_TOKENnoIf set, mcp-pear refreshes the JWT itself when it expires mid-session (each refresh rotates the token). Without it, the orchestrator has to re-mint and respawn the subprocess.

When PEAR_JWT expires and no refresh token is set, authenticated tools return:

JWT expired; the orchestrator must mint a new one and restart mcp-pear.

See examples/telegram-bot-usage.ts for the orchestrator pattern.

Mode 2: API key + wallet address (single-user, Claude Desktop)
Env varRequiredDescription
PEAR_API_KEYfor auth toolsYour Pear API key.
PEAR_ADDRESSfor auth toolsWallet address bound to the API key (0x...).

mcp-pear mints the JWT itself by calling POST /auth/login. Both fields are required: the OpenAPI spec needs address in the request body.

Public-only mode

The four public tools work without any auth env vars. Authenticated tools return a ConfigError naming the missing env var.

Common settings (optional)
Env varDefaultDescription
PEAR_API_BASE_URLhttps://hl-v2.pearprotocol.ioPear API host.
PEAR_API_TIMEOUT_MS10000Per-request timeout.
PEAR_CLIENT_IDAPITRADERClient identifier sent to /auth/login.

Claude Desktop

Add to claude_desktop_config.json:

{

"mcpServers": { "pear": { "command": "npx", "args": ["-y", "@marvelcodes/mcp-pear@latest"], "env": { "PEAR_API_KEY": "your-pear-api-key-here", "PEAR_ADDRESS": "0xYourWalletAddress" } } } }

Restart Claude Desktop and ask: "Use Pear to show me the top active markets right now."

ADK-TS

import { McpToolset, StdioTransport } from "@iqai/adk";

const pearTools = new McpToolset({ transport: new StdioTransport({ command: "npx", args: ["-y", "@marvelcodes/mcp-pear@latest"], env: { PEAR_API_KEY: process.env.PEAR_API_KEY ?? "", PEAR_ADDRESS: process.env.PEAR_ADDRESS ?? "" }, }), });

await pearTools.connect(); const tools = await pearTools.listTools();

Full example in examples/adk-ts-usage.ts.

Tool reference

adjust_leverage

Change leverage (1-100x) on an existing Pear Protocol position. Higher leverage means greater liquidation risk for the same price move. WRITE: changes risk profile of a live position. Requires PEAR_TRADE_ENABLED=true.

ParameterTypeRequiredDescription
positionIdstringyes
leverageintegeryes
adjust_position

Reduce or increase an existing Pear Protocol position's size by 1-100 percent. executionType: MARKET (immediate) or LIMIT (provide limitRatio). WRITE: changes exposure on a real trade. Requires PEAR_TRADE_ENABLED=true.

ParameterTypeRequiredDescription
positionIdstringyes
adjustmentTypestringyes
adjustmentSizeintegeryes
executionTypestringyes
limitRationumber
referralCodestring
cancel_order

Cancel a pending Pear Protocol limit, take-profit, or stop-loss order by orderId. Does not affect already-filled portions. For TWAP orders, use cancel_twap_order. WRITE: cancels a live order. Requires PEAR_TRADE_ENABLED=true.

ParameterTypeRequiredDescription
orderIdstringyes
cancel_twap_order

Cancel a Pear Protocol TWAP (time-weighted average price) order and all of its remaining unfilled chunks. WRITE: cancels a live order. Requires PEAR_TRADE_ENABLED=true.

ParameterTypeRequiredDescription
orderIdstringyes
close_all_positions

Close every open Pear Protocol position with a single executionType (MARKET or TWAP). Returns a per-position result array with success/error. WRITE: executes real trades. Requires PEAR_TRADE_ENABLED=true.

ParameterTypeRequiredDescription
executionTypestringyes
twapDurationnumber
twapIntervalSecondsnumber
randomizeExecutionboolean
referralCodestring
close_position

Close one open Pear Protocol position by positionId. executionType: MARKET (immediate) or TWAP (spread over time; requires twapDuration in seconds). WRITE: executes a real trade. Requires PEAR_TRADE_ENABLED=true.

ParameterTypeRequiredDescription
positionIdstringyes
executionTypestringyes
twapDurationnumber
twapIntervalSecondsnumber
randomizeExecutionboolean
referralCodestring
create_agent_wallet

Create a new Pear Protocol agent wallet for the authenticated user. The agent wallet is what Pear uses to sign Hyperliquid trades. After creation, the user MUST approve this wallet on Hyperliquid (the response message contains the approval instructions). WRITE: executes a state change. Requires PEAR_TRADE_ENABLED=true.

_No parameters_

get_account_summary

Get the authenticated user's Pear Protocol account summary: agent wallet address, total closed trades, pending trigger-order USD value, pending TWAP-chunk USD value, and last sync timestamp. Requires PEAR_API_KEY.

_No parameters_

get_active_markets

Get the most active Pear Protocol pair markets right now: current active pairs plus top gainers, top losers, highlighted pairs, and the user's watchlist. Use to see what's hot or as a starting point for narrowing into a specific pair.

_No parameters_

get_agent_wallet

Get the authenticated user's Pear Protocol agent wallet address. The agent wallet is what Pear uses to sign Hyperliquid trades on the user's behalf. Returns an empty/missing address if no agent wallet has been created yet; call create_agent_wallet to create one.

_No parameters_

get_health

Check Pear Protocol API health. Returns service status, server timestamp, and uptime in seconds. Use this to verify the API is reachable before running other tools.

_No parameters_

get_open_orders

List the authenticated user's open limit, take-profit, and stop-loss orders on Pear Protocol. Returns each order's ID, type, status, and pair composition. Requires PEAR_API_KEY.

_No parameters_

get_open_positions

List the authenticated user's currently open Pear Protocol pair positions, including position ID, entry ratio, mark ratio, unrealized PnL, and long/short composition. Requires PEAR_API_KEY.

_No parameters_

get_pair_ratio

Get the current ratio (long/short composition price) for a specific Pear Protocol pair. Pass long and short asset arrays. Returns the ratio, 24h change, and funding rate. Useful when you know the pair you care about and want the latest number.

ParameterTypeRequiredDescription
longAssetsarrayyesAsset symbols on the long side (e.g. ['BTC']).
shortAssetsarrayyesAsset symbols on the short side. Pass an empty array for long-only baskets.
get_portfolio

Fetch the authenticated user's full portfolio metrics on Pear Protocol: bucketed PnL across last 1 day / 1 week / 1 month / 1 year / all-time, plus overall stats (total trades, all-time volume, current open interest, unrealized PnL). Requires PEAR_API_KEY.

_No parameters_

get_trade_history

Fetch the authenticated user's recent closed trades on Pear Protocol with realized PnL, entry/exit ratios, and pair composition. Optional date range and limit. Requires PE

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요