프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Prawo Pl MCP

제작자: matematicsolutions버전 0.2.4i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.matematicsolutions/prawo-pl-mcp

설치

개요

제작자가 쓴 설명(영어 원문)

One MCP server for Polish legal data - courts, legislation, KRS, tax, KIO, UODO via 4 unified tools

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 회계, 재무 및 세금

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • PyPIPython의 uv 설치(uvx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "prawo-pl": {
      "command": "uvx",
      "args": [
        "prawo-pl-mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add prawo-pl -- uvx prawo-pl-mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "prawo-pl": {
      "command": "uvx",
      "args": [
        "prawo-pl-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "prawo-pl": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "prawo-pl-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 matematicsolutions 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

회계, 재무 및 세금 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1734개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1734개 중 48%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1734개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Prawo Pl MCP, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.2.4)은 44일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Finance Toolkit, SolidInvoice, Korea Tax Calculator

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Finance Toolkit

제작자: JerBouma

500+ transparent financial methods calculated from raw statements, not third-party endpoints.

컴퓨터 또는 클라우드★ 5,496MIT오늘 업데이트
설치

SolidInvoice

제작자: SolidInvoice

Create and send invoices and quotes, manage clients, and track payments in SolidInvoice.

클라우드에서 실행★ 981MIT8일 전 업데이트
설치

Korea Tax Calculator

제작자: UpstageAI

Korean tax calculation and tax-audit judgment MCP: 96 tools with statutory citations.

내 컴퓨터에서 실행★ 97MIT어제 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

prawo-pl-mcp

One MCP server for Polish legal data.

Ten independent connectors - case law, legislation, the company register, tax rulings, public procurement, data-protection decisions, plus EU extras - behind five tools. Each connector stays a separate package with its own repository; this server spawns them on demand and translates between their conventions.

"Prawo" is Polish for "law"; the name follows yargi-mcp's move of naming a country server in its own language.

Why an aggregator

The connectors cover Polish legal data well, but as separate MCP servers, one per database - ten installs and ten config entries before the first question. yargi-mcp showed the fix for Turkish law: 16 institutions, one server. prawo-pl-mcp does the same for Poland:

  • Five tools instead of 42. pl_list_sources, pl_search, pl_get_document, pl_call and pl_coverage - fewer tool schemas means less context spent before the LLM starts working.
  • One convention. The connectors grew organically: dateFrom here, date_from there, pages counted from 0 or from 1 depending on the repo. Here page is always 1-based and dates are always date_from/date_to (YYYY-MM-DD); the translation happens inside. One name per concept applies to the aggregator's own tools too: page is the page parameter of both pl_search and pl_get_document (page_number still works as a deprecated alias), and pl_call takes arguments or its alias args.
  • Native names on the table. Every catalog entry carries native_params - the native parameter name each unified one maps to for that source, so article_number (eu-compliance) is visible without spawning the connector or reading an upstream error. pl_call checks the names it was given against the connector's own schema and says which one it meant.
  • Nothing preinstalled. Connectors run as subprocesses via npx -y / uvx, downloaded on the first call to a given source and kept alive afterwards. A source that cannot start reports a readable error while the rest keep working.
  • Paginated documents. Full judgment and act texts are chunked at ~5000 characters per page (yargi-mcp's pattern), so a 200-page ruling does not flood the context window. Sources that paginate server-side (isap) get the page forwarded natively and are reported as pagination: "native" - the aggregator does not re-cut an already-cut page and does not invent a total_pages it cannot know.

Coverage

Source idWhatInstitution / databaseConnectorRuntime
saosCase law: common courts, Supreme Court, Constitutional Tribunal + citatorSAOSmcp-saosnpx
nsaCase law: administrative courts (NSA + 16 WSA)CBOSAmcp-nsanpx
isapLegislation: Dziennik Ustaw + Monitor Polski, 96k+ actsSejm ELI APImcp-isapnpx
krsCompany register: extracts, history, board compositionKRS API (Ministry of Justice)mcp-krsnpx
eurekaTax rulings: 550k+ individual interpretationsEUREKA (Ministry of Finance)mcp-eurekanpx
kioPublic procurement: National Appeal Chamber rulingsorzeczenia.uzp.gov.plkio-orzeczenia-mcpuvx
uodoGDPR enforcement: Polish DPA decisions, fines, statsorzeczenia.uodo.gov.pluodo-orzeczenia-mcpuvx
eu-sparqlEU law: EUR-Lex by CELEX, CJEU by ECLI, GDPRhubCellar SPARQLmcp-eu-sparqlnpx
eu-compliance14 EU regulations offline (GDPR, AI Act, DORA, NIS2...)Local SQLite corpusmcp-eu-compliancenpx
legalizeLaw-as-git: 32 jurisdictions, versioned by commitlegalize-devlegalize-mcpuvx

Polish sources are tagged group: pl, EU extras group: eu - filter with pl_list_sources(group="pl").

Tools

ToolWhat it does
pl_list_sourcesCatalog of sources (no subprocess spawned). With source_id: live tool schemas of one connector.
pl_searchSearch any source with normalized parameters; source-specific filters via extra.
pl_get_documentFull document by identifier (judgment id, ELI, KRS number, signature...), paginated.
pl_callAny native tool of any connector: citator, DPA statistics, board composition, regulation comparison...
pl_coverageDeclare what this connector covers, when each family was captured, and - explicitly - what it does NOT cover. Every gap carries a fallback.

The typical flow an LLM follows (spelled out in the server's instructions): pl_list_sources → pl_search → pl_get_document, with pl_call for the specialized tools each connector brings.

Install

Requires Python ≥ 3.11 plus the runtimes of the sources you use: Node.js ≥ 18 for npx sources, uv for uvx sources. If a runtime is missing, its sources report source_unavailable and the rest work.

Claude Code
claude mcp add pl-legal -- uvx prawo-pl-mcp
Claude Desktop / any MCP client (stdio)
{

"mcpServers": { "pl-legal": { "command": "uvx", "args": ["prawo-pl-mcp"] } } }

Remote (Streamable HTTP)
uvicorn prawo_pl_mcp.asgi:app --host 0.0.0.0 --port 8000

Open by default (public, read-only data). Set PRAWO_PL_MCP_API_KEY to require X-API-Key: or Authorization: Bearer on every request.

Configuration

EnvDefaultMeaning
PRAWO_PL_MCP_CMD_ -Override the spawn command for a source, e.g. PRAWO_PL_MCP_CMD_SAOS="node C:/dev/mcp-saos/dist/index.js" for a local checkout. = source id, uppercase, - → _.
PRAWO_PL_MCP_INIT_TIMEOUT180Seconds allowed for a connector's first start (includes package download).
PRAWO_PL_MCP_TIMEOUT90Seconds per tool call after startup.
PRAWO_PL_MCP_AUDIT_DIR~/.matematic/auditWhere the JSONL audit log goes.
PRAWO_PL_MCP_API_KEY-ASGI mode only: require this API key (dual-channel).

Architecture

The aggregator is a thin proxy (ADR 0001). Connectors are not imported, vendored or forked; the aggregator speaks MCP to them over stdio the same way any client would. The whole layer is a source registry (one dataclass entry per connector), a lazy subprocess pool, a parameter translator and a paginator. Adding a source means adding a registry entry.

LLM client ──MCP──▶ prawo-pl-mcp ──MCP/stdio──▶ npx @matematicsolutions/mcp-saos

│ ──MCP/stdio──▶ uvx kio-orzeczenia-mcp │ ──MCP/stdio──▶ ... (spawned on first use) └─ registry + param mapping + 5000-char pagination

Every call lands in a JSONL audit log (timestamp, tool, source, parameter hash, latency - never document content).

Development

git clone https://github.com/matematicsolutions/prawo-pl-mcp && cd prawo-pl-mcp

uv sync --extra dev uv run pytest # offline tests: registry, dispatch mapping, pagination, drift uv run prawo-pl-mcp # stdio server

License

Apache-2.0. Individual connectors carry their own licenses (MIT or Apache-2.0), their own rate limits and their own terms toward upstream databases - the aggregator adds no caching and no transformation beyond pagination, so each connector's constraints apply unchanged.

PopNx에게 묻기