프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Memorybank

제작자: maxweb4u버전 0.3.2i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.maxweb4u/memorybank

설치

개요

제작자가 쓴 설명(영어 원문)

Seeds, governs and navigates a memory_bank knowledge base: gated writes, routing, drift vs code

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 검색 및 AI 기억

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • npmNode.js 설치(npx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "memorybank": {
      "command": "npx",
      "args": [
        "-y",
        "@maxweb4u/mcp-memorybank",
        "--root",
        "<./memory_bank>"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add memorybank -- npx -y @maxweb4u/mcp-memorybank --root '<./memory_bank>'

이 서버는 실행 명령어에 값을 넣어야 해서, 설정을 복사한 뒤 직접 채워 주세요.

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "memorybank": {
      "command": "npx",
      "args": [
        "-y",
        "@maxweb4u/mcp-memorybank",
        "--root",
        "<./memory_bank>"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 실행 명령어에 값을 넣어야 해서, 설정을 복사한 뒤 직접 채워 주세요.

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "memorybank": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "@maxweb4u/mcp-memorybank",
        "--root",
        "<./memory_bank>"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 maxweb4u 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

검색 및 AI 기억 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 7234개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 7234개 중 50%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 7234개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Memorybank, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.3.2)은 39일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Context7, Codebase Memory, Exa

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Context7

제작자: upstash

Up-to-date docs for AI agents

컴퓨터 또는 클라우드★ 64,224MIT3일 전 업데이트
설치

Codebase Memory

제작자: DeusData

Codebase knowledge graph for AI agents — 162 languages, sub-ms queries, 99% fewer tokens.

내 컴퓨터에서 실행★ 48,148MIT20일 전 업데이트
설치

Exa

제작자: exa-labs

Connect AI agents to Exa for web search, content fetching, and multi-step research.

클라우드에서 실행★ 5,213MIT44일 전 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

mcp-memorybank

An MCP server for a memory_bank knowledge base. It seeds one from nothing, gates every write against the rules the bank itself declares, routes to the right document without reading the bank, and reports where the code has moved on without the documents.

It writes nothing on its own initiative. Every document arrives from a deliberate call carrying a purpose, an upstream dependency and an index entry; what the end-of-session hook collects lands in a quarantine that only a human empties.

Spec — specification.md, plan — implementation-plan.md, what a seeded bank is made of and where it strains — architecture.md.

Everything in the plan is done: E0 index, E1 reads, E2 validation, E3 graph, E4 search and delta, E5 writes.

What it is measurably good at, and what it is not

Counted across six banks in real use, by parsing the sessions rather than by impression:

writing into the bank, through the server     985 calls

reading the bank, through the server 187 calls reading the bank, around the server 1755 calls (cat, grep, Read) bank_route specifically 33 calls

The writing half works. bank_create, bank_edit and bank_update_section are used in every bank, with or without any instruction to do so, because writing a governed document by hand is harder than calling the tool: it would have to reproduce the frontmatter, resolve the derived_from, and register itself in a section index, and it would fail validation if it got any of that wrong. Ninety percent of all server calls are writes.

The reading half is mostly bypassed. Nine times out of ten an agent opens the bank with cat and grep instead of asking bank_route which documents matter. This is not a claim that routing answers badly — nobody has measured that. It is a claim that it does not get asked, because reaching for the shell is what a model does in every repository and nothing here outweighs the habit.

Two things follow, and neither is comfortable. Routing is the feature this README leads with and the one the token arithmetic below is built on, and it is the least used. Editing existing documents was written into the specification as something the server would *not* do — see §8 — and it turned out to be the half that carries the project.

The one lever with evidence behind it is the paragraph under Telling the agent to use it: the four banks that carry it route eight times more often than the two that do not, 32% of reads against 4%. That is a correlation across six projects, and it is being tested properly — see A-06 in backlog.md.

How it works

There is no database, no daemon and no configuration. A directory of markdown files is the entire state, and the server is a reader of it that happens to speak MCP. Everything it knows it re-derives from the files; delete its process and nothing is lost, because nothing was ever kept anywhere else.

The index, and why there is no watcher

On startup the server walks the bank once, and on every call it walks it again: readdir, stat, and a parse only for the files whose mtime moved. A cold build of a 368-document bank takes about 85 ms; the walk before an unchanged call costs 11–13 ms.

That is why there is no file watcher. A watcher would save those milliseconds and buy an error class in exchange — an index that has quietly diverged from the disk, in a tool whose whole job is to be trusted about what the disk says. The cheap check wins on both counts.

What a document becomes

Each file is parsed once into a record: the frontmatter fields, the second-level section headings with their line spans, byte size, mtime — and one thing the file does not contain, a layer computed from the path (dna, knowledge, decision, delivery, flow, inbox, other).

Frontmatter goes through gray-matter in exactly one place. When the YAML is invalid — an unquoted colon in purpose is the common case — the document does not fall out of the index: its metadata is recovered line by line and the parse error is kept for bank_validate to report. A document that disappears from routing because of a typo is worse than one that ranks badly.

The contract comes from the bank

doc_kind, doc_function, status, whether derived_from is mandatory, which document is the declared root — all of it is read out of the bank's own dna/frontmatter.md and dna/governance.md at refresh time. Nothing is hardcoded, and the sets are open.

This is not politeness: banks disagree about their own vocabulary, and a fixed enum rejects a sizeable minority of real documents by doc_kind alone. A bank with no dna/ still works: the server runs in degraded mode — reading, routing, search and the structural rules — and says so instead of enforcing a contract nobody declared.

Routing: ranking the header, never the prose

bank_route answers "what should I read about this", and it reads only what a human wrote by hand about each document — never the body. Four fields, with fixed weights:

FieldWeightScored as
canonical_for5how much of a fact key the question covers, not whether one word of it matched
purpose3word overlap
title2word overlap
section headings1the best-matching heading, which is also returned so the answer can be read section-scoped

The raw score is then multiplied, and the multipliers are where the ranking actually gets its judgement:

  • Layer. knowledge ×1.5, decision ×1.2, dna / flow / other ×1.0, delivery ×0.6, inbox ×0.2. Delivery is damped because in a bank that has been in use for a while it is most of the documents; without this a question about a rule returns the closed features that mention it.
  • Status. active ×1, draft ×0.7, archived ×0.2.
  • Closed work. delivery_status: done or cancelled halves the score again. A finished feature is history, not an answer.
  • Intent. A question containing *why*, *rationale*, *instead of*, *почему*, *вместо* reweights the whole run toward decisions: decision ×1.6, knowledge ×1.2. "Why X" and "what is X" are different questions and should not return the same document first.

Templates never appear in results: they are structurally identical to real documents and would flood every list.

Search: a different index for a different question

bank_search is not a fallback for routing, it answers the other half. Routing ranks the hand-written header ("which document is *about* this"); search reads the prose ("where does this string actually appear"). Identifiers, error messages and literals live only in bodies.

It builds an inverted index over document bodies, incrementally on the same mtime check. A query matches in three tiers by confidence — the word as typed weighs 10, its equivalent in the other language 6, a fragment of a compound token 1 — and documents matching every concept are ranked before documents matching some. The fragment tier is what keeps FT-042 from lifting the features/README.md registry, with its seventy FT-* lines, above the feature itself.

Writing: one operation, or none

bank_create writes the document, fills the frontmatter the contract asks for, and registers it in the section index in the same call — so the registration step cannot be forgotten, which is the single most common way a bank rots. Registration copies the shape of the last entry in that index, table row or bullet or numbered item, so a hand-written file is not reformatted.

Before any of that it refuses, with the reason named: the path is taken, derived_from does not resolve, canonical_for is already owned by another document, the path leaves the bank root, or it does not end in .md. A refusal writes nothing at all — no partial file, no orphaned index line.

Two rules follow from those gates, and they are the reason the writes are worth having: an SSoT conflict and a broken edge cannot enter the bank through this server. They can only arrive by editing a file behind its back.

The graph

bank_graph walks derived_from breadth-first with a node ceiling, so a hub document does not drag in the whole bank and a cycle does not loop. Each edge lands in one of three outcomes: internal (a node), external (it leaves the bank root — in a monorepo, banks nest), or broken. up is what a document is built on; down is the blast radius of changing it.

An external edge is followed exactly one hop: the target's frontmatter is read and returned under neighbours, and nothing else about it is. It is not indexed, not validated, not searchable, and its own edges are not walked. The boundary stays where it was — but in a monorepo those edges carry real decisions, and a blast radius that silently ends at the repository wall is wrong rather than partial. Pass neighbours: false to skip the reads.

Drift

bank_drift answers the question validation cannot: not "is something missing" but "has what we wrote gone stale". A document that describes code lists it in anchors:, and the server compares the last commit that touched the document against the last commit that touched the code. Where the code is ahead by more than the threshold, it says so — and where an anchor points at a path that no longer exists, it always says so, because that is the code moving out from under the document.

It never guesses which document owns which file. The pairing is hand-annotated or it does not exist, which means a bank that has not been annotated gets an honest empty answer and a note saying why. And it reports without editing: whether a six-month gap matters is not a judgement a timestamp can make.

What a seeded bank contains

bank_init writes 24 files: the governance set in dna/, a root index, eight section registries, the four flow documents, a pointer where the templates would be, and two drafts to fill in. Three more sections — epics, prd, prompts — are built the first time a document needs one, index and root-index entry included, rather than standing empty from the start.

The document templates are not copied. They ship with the server and bank_create reads them from there, so a bank behaves exactly as if it held them; --materialize-flows copies them in for a project that means to change one, and from then on the bank's own copies win. The prose flows *are* copied, because people read them and routing answers with them.

dna/ is copied too, and that one is not negotiable: it is the law the bank is judged by, and the design rests on it travelling with the corpus. Every top-level directory's layer and ranking weight is declared there as well — a bank that renames a section says so in that table and keeps its weight, and a bank that declares nothing gets the built-in map.

What it will not do

It does not create a document by editing — every new document goes through bank_create, so nothing enters the bank without a path check, a derived_from that resolves and an index entry. It does not promote anything out of _inbox/ on its own. It does not invent a schema, and it does not enforce a rule the bank has not declared. It does not delete a document outside _inbox/. And it does not index, validate or search anything outside the bank root — the one hop bank_graph takes into a neighbouring bank reads a header and stops there.

What it costs in tokens

Wiring a server in is not free, and the cost is paid in two different currencies. All figures below were measured on the shipped build, counting characters of the actual JSON-RPC payloads and converting at 3.5 characters per token — dense JSON runs closer to that than the 4 that suits prose.

The fixed half is paid on every request, whether a tool is called or not, because the definitions li

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요

PopNx에게 묻기