프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Monte-Neo strategy verifier

제작자: NeoZorK버전 0.54.0i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.NeoZorK/monte-neo

설치

개요

제작자가 쓴 설명(영어 원문)

Verify trading-strategy backtests: look-ahead probes, trading costs, Deflated Sharpe, walk-forward.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 회계, 재무 및 세금

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • PyPIPython의 uv 설치(uvx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "monte-neo": {
      "command": "uvx",
      "args": [
        "monte-neo",
        "mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add monte-neo -- uvx monte-neo mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "monte-neo": {
      "command": "uvx",
      "args": [
        "monte-neo",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "monte-neo": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "monte-neo",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 NeoZorK 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

회계, 재무 및 세금 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 2898개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 2898개 중 64%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 2898개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Monte-Neo strategy verifier, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.54.0)은 18일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Finance Toolkit, SolidInvoice, Korea Tax Calculator

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Finance Toolkit

제작자: JerBouma

500+ transparent financial methods calculated from raw statements, not third-party endpoints.

컴퓨터 또는 클라우드★ 5,496MIT어제 업데이트
설치

SolidInvoice

제작자: SolidInvoice

Create and send invoices and quotes, manage clients, and track payments in SolidInvoice.

클라우드에서 실행★ 981MIT8일 전 업데이트
설치

Korea Tax Calculator

제작자: UpstageAI

Korean tax calculation and tax-audit judgment MCP: 96 tools with statutory citations.

내 컴퓨터에서 실행★ 97MIT어제 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

The independent verifier for trading strategies written by AI agents and humans.

Catch look-ahead bias, hidden trading costs and overfitting before a backtest reaches your money.

Docs · Quick start · Use from agents · Verifier API · Trap Suite · Changelog

Did it catch a leak in your backtest? Star the repository so other quants and agent builders can find it, or tell us what it missed .


The problem

A coding agent can turn a trading idea into a backtest in minutes. It will then tell you the strategy returns 40% a year with a Sharpe of 3. Most of the time that number is wrong, for the same few reasons:

  • Look-ahead bias. The code reads future bars: shift(-1), centred windows, bfill, statistics over the whole series, np.gradient, an FFT filter.
  • Missing costs. The edge is smaller than fees and slippage, or it disappears when the fill comes one bar later.
  • Selection bias. The agent tried 300 variants and reports the best one as if it were the only one.

Backtest libraries run whatever code you give them. None of them tell you the backtest itself is broken.

The solution

Monte-Neo checks the backtest, not the idea. Give it the price data and the strategy code or its positions. It returns one of four verdicts, the checks behind the verdict, concrete next steps and a reproducible, optionally signed certificate.

The agent's strategy used shift(-1), so it knew the next close. Monte-Neo found the leak in four independent ways and named the line. After the fix, no look-ahead is left, and the verifier tells the truth: on a random walk, the strategy has no edge after costs.

The same run as a report for people (--html report.html: one file, no scripts, no network):

More reports, including an honest strategy and a parameter search, are in the gallery.

Text output of the first run

$ monte-neo verify --ohlcv prices.csv --strategy agent_strategy.py --n-trials 40

REJECT certificate 7f0603b0e604bea5 check category status summary data_integrity integrity pass OHLCV is clean lookahead_truncation lookahead fail truncation probe: LEAK DETECTED lookahead_perturbation lookahead fail future-perturbation probe: LEAK DETECTED lookahead_static_lint lookahead fail static lint: negative_shift implausible_accuracy lookahead fail next-bar hit rate 1.000 over 2999 bars (z 54.8) net_profitability economics fail net total return -64.97% after costs deflated_sharpe statistics fail deflated Sharpe 0.000 over 40 trial(s) ... (16 more checks) → The signal at bar t changes when later bars are removed: compute features only from rows <= t (no shift(-k), centered windows, bfill or full-sample stats). → Fix the flagged source lines (negative shift, center=True, backward fill) and re-run verify. Lines: 6.

The run used a synthetic random walk; output shortened.

VerdictMeaningCLI exit code
PASSNo problems found0
PASS_WITH_WARNINGSUsable; read the warnings0
NEEDS_MORE_EVIDENCEToo few trades, or the Sharpe does not survive the number of variants tried1
REJECTThe backtest is broken or loses money after costs2

New in v0.53: from a rejected backtest to a committee

Repair the strategy, without overfitting it
monte-neo repair --demo

monte-neo repair --ohlcv data.csv --strategy my_strategy.py --out repair/

Optimisers maximise the return, so they overfit. repair minimises defects instead. It first corrects look-ahead and repainting. Then it picks from a short list of declared repairs (smoothing, holding period, no-trade band, tranches, neutralisation, caps, volatility target) on the first 70 % of the history, by the number of defects left and never by return, and counts every candidate as a trial. The last 30 % is a lockbox, opened once.

There are four outcomes:

  • REPAIRED: on data the choice never saw, the strategy still earns after costs and is not rejected (the lockbox can still ask for more evidence, such as more trades).
  • REPAIRED_NO_EDGE: the defects are gone and so is the profit, because the profit was in the defect.
  • NOT_REPAIRABLE: what you have to do yourself.
  • NOTHING_TO_REPAIR: there was nothing in the catalogue to fix.

The original file is never touched. On a random walk, none of the 68 leaking strategies of the Trap Suite comes out as REPAIRED. Guide.

Is it alpha? An Alpha Readiness Level for the committee
monte-neo alpha --demo --aum 2e5

monte-neo alpha --ohlcv universe.csv --scores scores.csv --aum 5e7 --book book.csv --n-trials 40

A ranking signal gets the checks a fund's research committee runs before it gives capital:

  • signal power: rank IC, decay, quantiles, placebo scores;
  • attribution: is it alpha, or momentum and short volatility under a new name?
  • value to your book: the marginal Sharpe;
  • implementability: square-root impact at your capital, capacity, short leg, rebalance day;
  • robustness: subsets, start dates, bootstrapped markets;
  • data and process: today's index members, mismatched exchange closes, decay after publication;
  • multiple testing: the t ≥ 3 hurdle, the minimum backtest length;
  • risk: named crises, tails.

Everything ends in one line, for example ARL 6/9 — blocked at 7: tradable and robust (rebalance_timing_luck). Missing evidence is "not assessed", never passed. Guide.

Evidence a model-risk committee can file
monte-neo dossier --certificate cert.json --framework sr11-7 --name "Momentum 20" --owner "Desk A"

monte-neo monitor --certificate cert.json --live live.csv # after launch: is the alpha dead?

A validation dossier is one folder with:

  • one printable page: summary, checks, readiness level, assumptions and limitations, how to reproduce, sign-off fields;
  • a clause map to SR 11-7, PRA SS1/23, MiFID II RTS 6, a crypto checklist or an academic appendix;
  • the certificate and the environment.

The map shows evidence, never compliance. `monitor` compares live returns with the backtest, measures realised slippage and raises sequential alarms when the edge dies. Guide.

Machine learning, LLM signals, events and track records
  • `fit` / `predict`. Define fit(train) and predict(model, df) instead of signal(df). The verifier refits only on the past, and ml_refit_gap rejects a model whose profit lived in fitting on the whole file.
  • `--model-cutoff 2024-06`. An edge that exists only before a language model's training cutoff is look-ahead through the model's memory.
  • `--events events.csv`. News, earnings or LLM outputs are joined by publication time. The report shows what a join by event time would have earned.
  • `verify --returns manager.csv`. Due diligence from returns alone: smoothing, missing small losses, implausible consistency, significance given the manager's number of funds.
  • `verify --legs legs.csv` and `--null-test pairs.py:pnl`. Phantom profit in pairs and stat-arb strategies: a rolling hedge ratio booked as position times the change of the spread earns a profit that no trader could, even on independent random walks. --legs re-derives the P&L from the quantity held in each leg and rejects a reported return the legs never earned (and writes the corrected series); --null-test runs the strategy on random walks, where it must earn nothing. Try monte-neo verify --demo-phantom.
  • Your institution's rules and history. --policy policy.toml applies your thresholds and records them in the certificate. --trials-from mlflow:./mlruns (Optuna, W&B, Ray Tune too) counts the runs you already logged. --ledger on a shared drive counts the whole team's attempts.
  • Where you already work. %%verify in Jupyter, Polars frames as input, and monte-neo dossier --lite for a one-page plain-language summary for people who do not read Sharpe ratios.
  • Two more lint rules for ML code. full_sample_transform (a scaler or PCA fitted on all rows) and `target

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요

PopNx에게 묻기