World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Builds and simulates Arduino breadboard circuits in Tinkercad Circuits.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 16/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 28/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 13 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Tinkercad Circuits MCP 설치해 줘. https://mcp.popnx.com/i/netchuu-tinkercad-circuits-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 13일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Tinkercad Circuits MCP을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "tinkercad-circuits": { "command": "npx", "args": [ "-y", "tinkercad-circuits-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Tinkercad Circuits MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"tinkercad-circuits": {
"command": "npx",
"args": [
"-y",
"tinkercad-circuits-mcp"
]
}
}
}Tinkercad Circuits MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Tinkercad Circuits MCP을 쓰고 있다고 하거나 답에 Tinkercad Circuits MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Tinkercad Circuits MCP에 연결할 수 없어요
Tinkercad Circuits MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Tinkercad Circuits MCP에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Tinkercad Circuits MCP을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user tinkercad-circuits -- npx -y tinkercad-circuits-mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Tinkercad Circuits MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user tinkercad-circuits -- npx -y tinkercad-circuits-mcpTinkercad Circuits MCP이 목록에 있고 연결됨으로 보이면 돼요
Tinkercad Circuits MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Tinkercad Circuits MCP을 쓰고 있다고 하거나 답에 Tinkercad Circuits MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Tinkercad Circuits MCP을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "tinkercad-circuits": { "command": "npx", "args": [ "-y", "tinkercad-circuits-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Tinkercad Circuits MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
Tinkercad Circuits MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Tinkercad Circuits MCP을 쓰고 있다고 하거나 답에 Tinkercad Circuits MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Tinkercad Circuits MCP을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "tinkercad-circuits": { "type": "stdio", "command": "npx", "args": [ "-y", "tinkercad-circuits-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Tinkercad Circuits MCP의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
Tinkercad Circuits MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Tinkercad Circuits MCP을 쓰고 있다고 하거나 답에 Tinkercad Circuits MCP 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
Claude Code
claude mcp add --scope user tinkercad-circuits -- npx -y tinkercad-circuits-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"tinkercad-circuits": {
"command": "npx",
"args": [
"-y",
"tinkercad-circuits-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"tinkercad-circuits": {
"command": "npx",
"args": [
"-y",
"tinkercad-circuits-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"tinkercad-circuits": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"tinkercad-circuits-mcp"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검
레지스트리 이름이 GitHub 계정 netchuu 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 14일 전
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
OSV.dev에 tinkercad-circuits-mcp@0.1.0 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 15일
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/netchuu-tinkercad-circuits-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 14일 전 변경됐고, 최신 버전(0.1.0)은 14일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 Tinkercad Circuits MCP | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
An MCP server that builds Arduino circuits in Tinkercad Circuits and runs them in the simulator. You describe the circuit (which part goes in which breadboard hole, the wires, the sketch) and it appears in your Tinkercad account, wired on a breadboard, with the code saved. It can then start the simulation, press buttons, type into the Serial Monitor and tell you what the LEDs, servos and serial output did.
It works with Claude Code, Claude Desktop, Cursor, Codex and any other client that speaks the Model Context Protocol.
*examples/traffic-light.json, built and simulated by the server. The LEDs are read back from the simulator to check the order.*
I wrote it to get through a course with 70-odd Arduino lab tasks that all had to be handed in as Tinkercad designs. Building them by hand took forever.
If you found sethski/tinkercad-mcp-server first: that one works by clicking and dragging in the editor. When I tried it in November 2026 it could not create a circuit or find the breadboard in the parts panel, and it had no way of knowing which hole a leg ended up in. This server changes the editor's circuit model directly, so parts land in the holes you name, and it reads the result back and checks it in the simulator.
Not affiliated with Autodesk. Tinkercad has no public API for Circuits; this uses the editor's internals, which can change without notice. See How it works.
About 20 parts are supported: LEDs, resistors, buttons, potentiometers, servos, a piezo, the HC-SR04, TMP36, DC motors (with and without encoder), the L293D, an IR receiver, an RGB LED and a few more. The full list is in docs/parts.md.
You need Node.js 20 or newer and Google Chrome.
Install it as a plugin. That adds the MCP server and the skill in one go:
/plugin install tinkercad-circuits --marketplace netchuu/tinkercad-circuits-mcp
From a shell: claude plugin marketplace add netchuu/tinkercad-circuits-mcp and then claude plugin install tinkercad-circuits@tinkercad-circuits-mcp.
If you only want the server: claude mcp add tinkercad-circuits -- npx -y tinkercad-circuits-mcp.
In ~/.codex/config.toml:
[mcp_servers.tinkercad-circuits]
command = "npx" args = ["-y", "tinkercad-circuits-mcp"]
and the skill:
mkdir -p ~/.codex/skills/tinkercad-circuits
curl -fsSL https://raw.githubusercontent.com/netchuu/tinkercad-circuits-mcp/main/skills/tinkercad-circuits/SKILL.md -o ~/.codex/skills/tinkercad-circuits/SKILL.md
Add this to the client's MCP config: claude_desktop_config.json for Claude Desktop, ~/.cursor/mcp.json for Cursor.
{
"mcpServers": { "tinkercad-circuits": { "command": "npx", "args": ["-y", "tinkercad-circuits-mcp"] } } }
Once, whichever client you use:
npx -y tinkercad-circuits-mcp login
This opens Chrome on the Tinkercad page. Sign in the way you normally do; it is an ordinary Chrome window. It closes once you reach your dashboard. The session lives in ~/.tinkercad-circuits-mcp/profile; your password never passes through this project.
Restart your client afterwards so it picks up the server.
You can hand the setup to Claude Code or Codex:
Set up the Tinkercad Circuits MCP server from https://github.com/netchuu/tinkercad-circuits-mcp, following its README.
The agent can do everything except signing in. It should run npx -y tinkercad-circuits-mcp login and ask you to sign in in the Chrome window that opens; then, after a restart, tinkercad_status should report signedIn: true.
git clone https://github.com/netchuu/tinkercad-circuits-mcp.git
cd tinkercad-circuits-mcp npm install npm run build npm run login
and use node /full/path/to/tinkercad-circuits-mcp/dist/index.js as the command in the configs above.
Ask for a circuit in plain words:
Build a traffic light in Tinkercad: red, yellow and green LEDs on pins 10, 9 and 8, green for 5 s, yellow 2 s, red 5 s. Then run it and check the order.
Claude turns that into a spec for tinkercad_build_circuit. A smaller one, a single blinking LED, looks like this:
{
"title": "Blink an LED on a breadboard", "parts": [ { "ref": "r1", "type": "resistor", "at": "5g", "pin": "1", "angle": 90, "props": { "ohms": 220 } }, { "ref": "led1", "type": "led", "at": "9i", "pin": "anode", "angle": 180 } ], "wires": [["uno.GND1", "T-1"], ["uno.D13", "5i"], ["10h", "T-10"]], "code": "void setup() { pinMode(13, OUTPUT); }\nvoid loop() { digitalWrite(13, HIGH); delay(1000); digitalWrite(13, LOW); delay(1000); }" }
The resistor spans columns 5 to 9 in row g, the LED's anode shares column 9 and its cathode goes to the ground rail. The format is explained in docs/circuit-spec.md, and there are more complete circuits in examples/.
To check the circuit, Claude calls tinkercad_simulate:
{ "samples_ms": [500, 1500, 2500], "leds": ["led1"] }
and gets back, for each sample, whether led1 was on and the simulator clock at that moment.
| Tool | What it does |
|---|---|
tinkercad_status | Checks that the Chrome profile is signed in to Tinkercad. |
tinkercad_list_parts | Parts, pin names and settings. |
tinkercad_open_circuit | Opens a design by link or id, or creates a new one. |
tinkercad_build_circuit | Replaces the open circuit with the one in the spec and saves the code. |
tinkercad_get_circuit | Reads the saved circuit back. |
tinkercad_set_code | Replaces the sketch. |
tinkercad_set_part | Changes a part setting (knob position, sensor distance). |
tinkercad_simulate | Runs the simulator with button presses and serial input; returns LED, servo and serial readings. |
tinkercad_screenshot | Returns a picture of the editor. |
npm run smoke tells you quickly whether it still works.npm test # unit tests for the spec and catalog, no browser needed
npm run smoke # builds and simulates two circuits in your Tinkercad account npm run parts-doc # regenerates docs/parts.md
The smoke test creates a design called "tinkercad-circuits-mcp smoke test". Pass its link to reuse it: npm run smoke -- https://www.tinkercad.com/things/ .
Issues and pull requests are welcome, especially new parts. Adding one is mostly finding its device id (the data-did attribute on the tile in Tinkercad's parts panel) and its pin names; How it works has the details.
MIT