프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Telegram Slack MCP

제작자: nileshpatil6버전 0.5.1i★ 0i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.nileshpatil6/telegram-slack-mcp

설치 방법

What it does

Read and reply to your personal Telegram chats and all your Slack workspaces.

  • Connects 내 컴퓨터에서 실행
  • Account or key Needs TELEGRAM_API_HASH, SLACK_USER_TOKENS
  • Category 채팅 및 이메일

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성7/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수7/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

Telegram Slack MCP 설치해 줘. https://mcp.popnx.com/i/nileshpatil6-telegram-slack-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

Telegram Slack MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server Telegram Slack MCP을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "telegram-slack": { "command": "npx", "args": [ "-y", "telegram-slack-mcp" ], "env": { "TELEGRAM_API_HASH": "your-value", "SLACK_USER_TOKENS": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) TELEGRAM_API_HASH, SLACK_USER_TOKENS에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Telegram Slack MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Telegram Slack MCP에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  4. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "telegram-slack": {
          "command": "npx",
          "args": [
            "-y",
            "telegram-slack-mcp"
          ],
          "env": {
            "TELEGRAM_API_HASH": "your-value",
            "SLACK_USER_TOKENS": "your-value"
          }
        }
      }
    }

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Claude를 끄고 다시 열기

  6. 해 보기

    Telegram Slack MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Telegram Slack MCP을 쓰고 있다고 하거나 답에 Telegram Slack MCP 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • TELEGRAM_API_ID https://my.telegram.org 에서 발급받은 api_id (Telegram 서버 전용)
    영어 원문 보기api_id from https://my.telegram.org (Telegram server only)
  • TELEGRAM_ALLOW_SEND 1로 설정하면 사용자 명의로 Telegram 메시지를 보낼 수 있습니다. 기본값은 꺼짐입니다.
    영어 원문 보기Set to 1 to allow sending Telegram messages as you. Off by default.
  • SLACK_ALLOW_SEND 1로 설정하면 사용자 명의로 Slack에 게시할 수 있습니다. 기본값은 꺼짐입니다.
    영어 원문 보기Set to 1 to allow posting to Slack as you. Off by default.
  • CHAT_MCP_DATA_DIR Telegram 세션이 저장되는 위치. 기본값은 /.chat-mcp입니다.
    영어 원문 보기Where the Telegram session is stored. Defaults to ~/.chat-mcp

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Telegram Slack MCP에 연결할 수 없어요

Telegram Slack MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Telegram Slack MCP에 연결되는 앱 쓰기

  • Telegram Slack MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • Telegram Slack MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • Telegram Slack MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • Telegram Slack MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

B · 채팅 및 이메일에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

Telegram Slack MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server Telegram Slack MCP을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user telegram-slack --env TELEGRAM_API_HASH=your-value --env SLACK_USER_TOKENS=your-value -- npx -y telegram-slack-mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) TELEGRAM_API_HASH, SLACK_USER_TOKENS에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Telegram Slack MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Telegram Slack MCP에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  4. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user telegram-slack --env TELEGRAM_API_HASH=your-value --env SLACK_USER_TOKENS=your-value -- npx -y telegram-slack-mcp

    Enter 전에 “your-value”를 내 키로 바꾸세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Claude Code에서 /mcp 입력

    Telegram Slack MCP이 목록에 있고 연결됨으로 보이면 돼요

  6. 해 보기

    Telegram Slack MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Telegram Slack MCP을 쓰고 있다고 하거나 답에 Telegram Slack MCP 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • TELEGRAM_API_ID https://my.telegram.org 에서 발급받은 api_id (Telegram 서버 전용)
    영어 원문 보기api_id from https://my.telegram.org (Telegram server only)
  • TELEGRAM_ALLOW_SEND 1로 설정하면 사용자 명의로 Telegram 메시지를 보낼 수 있습니다. 기본값은 꺼짐입니다.
    영어 원문 보기Set to 1 to allow sending Telegram messages as you. Off by default.
  • SLACK_ALLOW_SEND 1로 설정하면 사용자 명의로 Slack에 게시할 수 있습니다. 기본값은 꺼짐입니다.
    영어 원문 보기Set to 1 to allow posting to Slack as you. Off by default.
  • CHAT_MCP_DATA_DIR Telegram 세션이 저장되는 위치. 기본값은 /.chat-mcp입니다.
    영어 원문 보기Where the Telegram session is stored. Defaults to ~/.chat-mcp

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

Telegram Slack MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server Telegram Slack MCP을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "telegram-slack": { "command": "npx", "args": [ "-y", "telegram-slack-mcp" ], "env": { "TELEGRAM_API_HASH": "your-value", "SLACK_USER_TOKENS": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) TELEGRAM_API_HASH, SLACK_USER_TOKENS에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Telegram Slack MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Telegram Slack MCP에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    Telegram Slack MCP 설정에서 TELEGRAM_API_HASH, SLACK_USER_TOKENS가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Cursor에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    Telegram Slack MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Telegram Slack MCP을 쓰고 있다고 하거나 답에 Telegram Slack MCP 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • TELEGRAM_API_ID https://my.telegram.org 에서 발급받은 api_id (Telegram 서버 전용)
    영어 원문 보기api_id from https://my.telegram.org (Telegram server only)
  • TELEGRAM_ALLOW_SEND 1로 설정하면 사용자 명의로 Telegram 메시지를 보낼 수 있습니다. 기본값은 꺼짐입니다.
    영어 원문 보기Set to 1 to allow sending Telegram messages as you. Off by default.
  • SLACK_ALLOW_SEND 1로 설정하면 사용자 명의로 Slack에 게시할 수 있습니다. 기본값은 꺼짐입니다.
    영어 원문 보기Set to 1 to allow posting to Slack as you. Off by default.
  • CHAT_MCP_DATA_DIR Telegram 세션이 저장되는 위치. 기본값은 /.chat-mcp입니다.
    영어 원문 보기Where the Telegram session is stored. Defaults to ~/.chat-mcp

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

Telegram Slack MCP 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server Telegram Slack MCP을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "telegram-slack": { "type": "stdio", "command": "npx", "args": [ "-y", "telegram-slack-mcp" ], "env": { "TELEGRAM_API_HASH": "your-value", "SLACK_USER_TOKENS": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) TELEGRAM_API_HASH, SLACK_USER_TOKENS에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Telegram Slack MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Telegram Slack MCP에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    Telegram Slack MCP 설정에서 TELEGRAM_API_HASH, SLACK_USER_TOKENS가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. VS Code에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    Telegram Slack MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Telegram Slack MCP을 쓰고 있다고 하거나 답에 Telegram Slack MCP 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • TELEGRAM_API_ID https://my.telegram.org 에서 발급받은 api_id (Telegram 서버 전용)
    영어 원문 보기api_id from https://my.telegram.org (Telegram server only)
  • TELEGRAM_ALLOW_SEND 1로 설정하면 사용자 명의로 Telegram 메시지를 보낼 수 있습니다. 기본값은 꺼짐입니다.
    영어 원문 보기Set to 1 to allow sending Telegram messages as you. Off by default.
  • SLACK_ALLOW_SEND 1로 설정하면 사용자 명의로 Slack에 게시할 수 있습니다. 기본값은 꺼짐입니다.
    영어 원문 보기Set to 1 to allow posting to Slack as you. Off by default.
  • CHAT_MCP_DATA_DIR Telegram 세션이 저장되는 위치. 기본값은 /.chat-mcp입니다.
    영어 원문 보기Where the Telegram session is stored. Defaults to ~/.chat-mcp

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Telegram Slack MCP을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user telegram-slack --env TELEGRAM_API_HASH=your-value --env SLACK_USER_TOKENS=your-value -- npx -y telegram-slack-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "telegram-slack": {
      "command": "npx",
      "args": [
        "-y",
        "telegram-slack-mcp"
      ],
      "env": {
        "TELEGRAM_API_HASH": "your-value",
        "SLACK_USER_TOKENS": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "telegram-slack": {
      "command": "npx",
      "args": [
        "-y",
        "telegram-slack-mcp"
      ],
      "env": {
        "TELEGRAM_API_HASH": "your-value",
        "SLACK_USER_TOKENS": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "telegram-slack": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "telegram-slack-mcp"
      ],
      "env": {
        "TELEGRAM_API_HASH": "your-value",
        "SLACK_USER_TOKENS": "your-value"
      }
    }
  }
}

직접 입력할 값

  • TELEGRAM_API_ID env
    https://my.telegram.org 에서 발급받은 api_id (Telegram 서버 전용)
    영어 원문 보기api_id from https://my.telegram.org (Telegram server only)
  • TELEGRAM_API_HASH 비밀 필수 env
    https://my.telegram.org 에서 발급받은 api_hash (Telegram 서버 전용)
    영어 원문 보기api_hash from https://my.telegram.org (Telegram server only)
  • TELEGRAM_ALLOW_SEND env
    1로 설정하면 사용자 명의로 Telegram 메시지를 보낼 수 있습니다. 기본값은 꺼짐입니다.
    영어 원문 보기Set to 1 to allow sending Telegram messages as you. Off by default.
  • SLACK_USER_TOKENS 비밀 필수 env
    워크스페이스당 하나의 Slack 사용자 토큰(xoxp-), 쉼표로 구분 (Slack 서버 전용).
    영어 원문 보기One Slack user token (xoxp-) per workspace, comma separated (Slack server only)
  • SLACK_ALLOW_SEND env
    1로 설정하면 사용자 명의로 Slack에 게시할 수 있습니다. 기본값은 꺼짐입니다.
    영어 원문 보기Set to 1 to allow posting to Slack as you. Off by default.
  • CHAT_MCP_DATA_DIR env
    Telegram 세션이 저장되는 위치. 기본값은 /.chat-mcp입니다.
    영어 원문 보기Where the Telegram session is stored. Defaults to ~/.chat-mcp

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
84/주
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.5.1
레지스트리 공개i
2026년 8월 31일
코드 마지막 변경i
2026년 8월 31일
제작자
nileshpatil6
패키지
npm: telegram-slack-mcp
pypi: telegram-slack-mcp
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 18일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 nileshpatil6 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 3개월 전

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 telegram-slack-mcp@0.5.1 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/nileshpatil6-telegram-slack-mcp.svg)](https://mcp.popnx.com/en/servers/nileshpatil6-telegram-slack-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

채팅 및 이메일 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1999개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1999개 중 23%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1999개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Telegram Slack MCP, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: TELEGRAM_API_HASH, SLACK_USER_TOKENS

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 3개월 전 변경됐고, 최신 버전(0.5.1)은 3개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js, Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: emailmd, Kite Discord Bot Builder, e2a — email for AI agents, Infobip MCP, kernelCAD

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

emailmd

Render markdown into email-safe HTML, lint drafts for deliverability problems, and preview emails.

제작자: anypost널리 사용됨↓ 5.4천/주★ 1.4천4일 전 업데이트

컴퓨터 또는 클라우드✓ 서비스 회사 · emailmd.dev

Infobip MCP

Infobip MCP server for omnichannel communication and messaging. SMS, RCS, WhatsApp, Viber and more.

제작자: infobip초기★ 3613개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · infobip.com

kernelCAD

CAD in ChatGPT and Claude: editable parts, STEP/STL/drawings, in-chat 3D, automatic checks.

제작자: w1ne초기★ 3522일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · kernelcad.com
비슷한 항목과 비교
이 항목
Telegram Slack MCP
emailmdKite Discord Bot Buildere2a — email for AI agentsInfobip MCPkernelCAD
실행 위치컴퓨터에 설치 필요클라우드 또는 컴퓨터 설치 모두 가능클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요예아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요예아니요
기본 점검3/35/54/44/44/44/4
라이선스MITMITAGPL-3.0Apache-2.0MITMIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

telegram-slack-mcp

Give Claude your actual chats.

Two MCP servers that connect Claude to your *personal* Telegram and Slack accounts — your real DMs, groups, and channels, not a bot inbox.

claude mcp add telegram -- npx -y telegram-slack-mcp telegram

claude mcp add slack -- npx -y telegram-slack-mcp slack

Then just talk:

*"what's unread on telegram from actual people?"*

*"read my last 30 messages with Priya and draft a reply"*

*"search all my slack workspaces for the deploy postmortem"*

*"what's in the screenshot Priya sent me?"*


Why this exists

Most Telegram integrations use the Bot API, which only sees messages sent *to a bot you created*. It cannot read your existing conversations. telegram-slack-mcp uses MTProto, the same protocol the official app uses, authenticating as you — so Claude sees the chats you actually have.

For Slack, the usual connector is scoped to one workspace. telegram-slack-mcp takes one user token per workspace and treats them as a single surface, so "search everywhere" means everywhere.

Install

Pick whichever runtime you already have. Both ship the same tools.

Node
claude mcp add telegram -- npx -y telegram-slack-mcp telegram

claude mcp add slack -- npx -y telegram-slack-mcp slack

Python
claude mcp add telegram -- uvx telegram-slack-mcp telegram

claude mcp add slack -- uvx telegram-slack-mcp slack

Claude Code plugin
/plugin marketplace add nileshpatil6/telegram-slack-mcp

/plugin install telegram@telegram-slack-mcp /plugin install slack@telegram-slack-mcp

Other MCP clients (Claude Desktop, Cursor, …)

{

"mcpServers": { "telegram": { "command": "npx", "args": ["-y", "telegram-slack-mcp", "telegram"], "env": { "TELEGRAM_API_ID": "1234567", "TELEGRAM_API_HASH": "your_hash" } }, "slack": { "command": "npx", "args": ["-y", "telegram-slack-mcp", "slack"], "env": { "SLACK_USER_TOKENS": "xoxp-one,xoxp-two" } } } }

Setup

Telegram — 2 minutes
  1. Go to https://my.telegram.org → API development tools → create an app.
  2. Copy the api_id and api_hash, and set them:
   claude mcp add telegram      -e TELEGRAM_API_ID=1234567      -e TELEGRAM_API_HASH=your_hash      -- npx -y telegram-slack-mcp telegram
  1. Link your account. Either ask Claude — "log into telegram" — or do it yourself in a terminal, which needs no MCP client at all:
   TELEGRAM_API_ID=1234567 TELEGRAM_API_HASH=your_hash npx -y telegram-slack-mcp login
   # PowerShell

$env:TELEGRAM_API_ID="1234567"; $env:TELEGRAM_API_HASH="your_hash" npx -y telegram-slack-mcp login

Either way you scan a QR and the session is saved to ~/.chat-mcp.

Through Claude:

It calls login, which returns a link to a page showing a QR code (and the code as text, if your client renders it). Scan it from Telegram on your phone — Settings → Devices → Link Desktop Device — then it calls login_status to confirm. No phone number, no SMS code, no 2FA password typed anywhere. On the same machine you can click "open in Telegram Desktop" instead of scanning.

The session is saved to ~/.chat-mcp and persists; you do this once.

Can't scan? Use the phone-number flow

login_start(phone) sends you a code, login_complete(code, password?) finishes. Note that with this path your phone number and login code pass through the conversation as tool arguments, so they land in the model's context. The QR flow keeps them out of it.

Slack — 5 minutes
  1. Go to https://api.slack.com/apps → Create New App → From a manifest.
  2. Paste slack-app-manifest.yaml — it prefills every scope.
  3. Install to Workspace, then copy the User OAuth Token (xoxp-…, not xoxb-).
  4. Repeat step 3 for each workspace you want. Same app, one token each.
  5. Ask Claude: "connect my slack" — the login tool prompts for the tokens, verifies each one against Slack, and saves them to ~/.chat-mcp. Nothing to put in your config.

Prefer environment variables? That still works:

   claude mcp add slack -e SLACK_USER_TOKENS=xoxp-aaa,xoxp-bbb -- npx -y telegram-slack-mcp slack

Slack has no local OAuth flow, which is why you create the app yourself: Slack's OAuth requires a client secret and an HTTPS redirect URL, so a package distributed over npm cannot complete it without either shipping a secret publicly or running a callback server. This project has no server, so it asks for the token instead.

Tools

Telegram
toolwhat it does
login()scan a QR to link your account — no phone number or code
login_status()check whether the QR has been scanned yet
login_start(phone)fallback: send yourself a login code
login_complete(code, password?)finish login, save the session
whoami()which account is connected
list_chats(limit, query, unread_only, kind)recent chats; kind filters to dm, group, channel, bot…
read_chat(chat, limit, before_id)messages of one chat — chat takes @username, id, or part of a name
search_messages(query, chat?, limit)full-text search, one chat or all
unread_summary(limit, per_chat, kind)catch-up view; kind: "dm" skips the channel noise
read_media(chat, message_id, max_kb)view a photo or file — returns the actual image, not just its type
send_message(chat, text, reply_to?)reply as you — off unless `TELEGRAM_ALLOW_SEND=1`
Slack
toolwhat it does
login()prompts for your xoxp- tokens, verifies them, saves them
whoami()every connected workspace and who you are in each
list_channels(limit, query, workspace, types)channels across workspaces
list_dms(limit, workspace)1:1 and group DMs
read_channel(channel, limit, workspace, before_ts)one channel or DM
read_thread(channel, thread_ts, limit, workspace)replies inside a thread
search_messages(query, limit, workspace)supports in:#chan, from:@user
unread_summary(limit, per_chat, workspace)what's unread everywhere
read_file(file_id, workspace, max_kb)view a file shared in Slack — returns the actual image
send_message(channel, text, workspace, thread_ts?)post as you — off unless `SLACK_ALLOW_SEND=1`

Every Slack tool takes an optional `workspace` (any substring of the name). Leave it blank to act across all of them; it's only required when a channel name exists in more than one, and the error tells you which.

Configuration

variabledefaultmeaning
TELEGRAM_API_ID—from my.telegram.org
TELEGRAM_API_HASH—from my.telegram.org
TELEGRAM_ALLOW_SEND01 lets Claude send Telegram messages as you
SLACK_USER_TOKENS—one xoxp- token per workspace, comma separated
SLACK_ALLOW_SEND01 lets Claude post to Slack as you
CHAT_MCP_DATA_DIR~/.chat-mcpwhere the Telegram session is stored

Sending is off by default in both servers. Reading is the safe default; you opt into writing deliberately.

Privacy

Nothing is sent to any server belonging to this project. There is no such server.

telegram-slack-mcp runs entirely on your machine. The only network traffic it makes is directly to Telegram's and Slack's own APIs, using your own credentials. There is no telemetry, no analytics, no crash reporting, no license check, no "phone home" — grep the source, there is no endpoint to find.

The data path is exactly this:

your machine  <-->  Telegram / Slack APIs      (your credentials, your account)

your machine <--> Claude (only what you ask Claude to read)

Your credentials never reach Claude. Your session file and xoxp- tokens stay in ~/.chat-mcp and in your environment; the servers use them locally to make API calls and pass back only the messages themselves.

What *does* reach Claude is the chat content you ask about — because that is the point of the tool. If you ask Claude to read a conversation, that conversation goes into your Claude conversation and is handled under Anthropic's privacy policy, exactly like text you paste in yourself. Nothing else is read, and nothing is read in the background: the servers only act when Claude calls a tool.

The author of this project cannot see any of it.

Security

Read this part.

  • These act as you, not as a bot. Anything sent shows as sent by your account, and people in those chats cannot tell the difference.
  • The stored session is a full credential. ~/.chat-mcp/telegram.session and your xoxp- tokens are equivalent to being logged in as you. Anyone who copies them has your account. They never leave your machine, and nothing here phones home.
  • Everything Claude reads enters the model's context. Don't point this at accounts holding data you would not send to a model.
  • Telegram calls this a userbot. Automating a personal account is restricted by Telegram's ToS. Light personal read-and-reply use is common and low risk; bulk automation gets accounts banned. Your call, your account.
  • Revoke any time: Telegram → Settings → Devices, or delete the token in Slack's app settings. Deleting ~/.chat-mcp drops the local session.

Troubleshooting

"Telegram not logged in yet" — run the login flow: ask Claude to log in with your phone number. It persists after that; if it keeps reappearing, check that CHAT_MCP_DATA_DIR is writable.

"Missing Telegram credentials" — TELEGRAM_API_ID / TELEGRAM_API_HASH aren't reaching the server. With claude mcp add, pass them with -e.

Slack returns nothing at all — you're almost certainly authorized against an empty or wrong workspace. Run whoami to see which workspaces are actually connected.

`"#general" exists in several workspaces` — pass workspace to disambiguate; the error lists your options.

Slack search returns `not_allowed_token_type` — the token is a bot token (xoxb-). You need the User OAuth token (xoxp-).

Development

git clone https://github.com/nileshpatil6/telegram-slack-mcp

cd telegram-slack-mcp npm install && npm run build node dist/cli.js telegram # run the server on stdio

cd python && python -m build # build the Python distribution

License

MIT