프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Gate

제작자: nugehs버전 0.3.0i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.nugehs/gate

설치

개요

제작자가 쓴 설명(영어 원문)

One ship/no-ship verdict from aiglare, bouncer, tieline & repoctx — the unified merge gate.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • npmNode.js 설치(npx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "gate": {
      "command": "npx",
      "args": [
        "-y",
        "@nugehs/gate",
        "mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add gate -- npx -y @nugehs/gate mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "gate": {
      "command": "npx",
      "args": [
        "-y",
        "@nugehs/gate",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "gate": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "@nugehs/gate",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 nugehs 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32476개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32476개 중 13%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32476개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Gate, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.3.0)은 5개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, zanadir

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

zanadir

제작자: MustacheCase

Find what a repository's CI is missing, and which security checks cannot fail the build.

내 컴퓨터에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

gate

One ship/no-ship verdict from your whole nugehs toolchain.

gate runs aiglare, bouncer, tieline and repoctx against a repo and merges their four dialects into one normalized verdict. Each tool already answers a different "can this ship?" question — gate is the place they finally agree on the answer.

npx @nugehs/gate                      # audit the current repo

npx @nugehs/gate ./service --ci # fail the build on a blocking verdict npx @nugehs/gate --json # the unified verdict, machine-readable

┌──────────────────────────────────────────────┐ │ gate │ │ one config · one verdict · one report │ └──────────────────────────────────────────────┘ │ │ │ │ aiglare bouncer tieline repoctx red/amber/ pass/fail/ matched/ PASS/WARN/ green unknown drift FAIL │ │ │ │ └──── normalize to pass · warn · fail ─────┘ │ ✗ FAIL ⚠ WARN ✓ PASS

What it reports

  gate · /path/to/repo

✗ AI governance fail 2 red · 1 amber · 13 green · 1 blocking side-effect · Compliance skipped not configured (run bouncer init) · Contract drift skipped not configured (run tieline init) ⚠ Merge readiness warn 1 of 8 checks need attention

verdict: FAIL — 1 blocking · 1 warn · 2 skipped

Each tool's native result is normalized onto one status vocabulary:

StatusMeaning
passthe check ran and is clean
warnran, found something worth a look — not blocking
failran, found a blocking problem
unknownran, but couldn't determine — explicitly not a pass
skippednot applicable / not configured for this repo
errorthe tool couldn't be run, or returned garbage

The top-level verdict is the worst across the domains that actually ran (skipped never counts). unknown and error roll up to warn so nothing slips through as a silent pass.

How each dialect maps

ToolNative signal→ gate
aiglarea red surface on a side-effectful sinkfail; any red/amber → warn
bouncera fail finding (missing required control)fail; any unknown control → unknown
tielinedrift > 0 (FE call with no BE route)fail; unverifiable > 0 → warn
repoctxFAIL/BLOCK merge verdictfail; WARN → warn

gate runs aiglare without --ci and derives the blocking verdict itself,

so a tool that process.exit()s before flushing its pipe can't truncate the

report it feeds us.

A run that checked nothing is not a pass. If every domain is skipped or deselected (e.g. --skip them all, or a typo'd --only), gate reports NO CHECKS RAN (ok:false) and fails under --ci — a misconfiguration can't silently turn the gate green.

On repoctx + local mode. repoctx's merge-readiness gate can only verify review state (approvals, CODEOWNERS, required checks) against a host like GitHub. Run locally it reports those as a WARN, so on a clean local repo gate will often show merge readiness: warn. That's repoctx being honest about what it can't see locally — not a problem with your change.

CLI

gate [path] [options]

--json Emit the unified verdict as JSON --ci Exit non-zero when the gate fails (blocking by default) --strict Treat WARN/UNKNOWN as blocking too --only Run only these tools (aiglare,bouncer,tieline,repoctx) --skip Skip these tools -h, --help Show this help

gate mcp Start the MCP server (stdio)

By default only a fail verdict blocks under --ci — safe to adopt without drowning a team in warnings. Add --strict when you want warnings to gate too.

Tool resolution

gate doesn't bundle the four tools; it finds each one at runtime. Per tool, first hit wins:

  1. GATE_ _BIN environment variable (explicit override)
  2. the installed @nugehs/ package (from node_modules)
  3. a sibling checkout at ../ (local development)

A tool that can't be resolved is reported as skipped, never a hard failure — so gate is safe to run in a repo that only uses some of the toolchain.

In CI

- run: npx @nugehs/gate . --ci

For a machine-readable record, --json emits the full verdict (schema version, per-domain results, counts, and the blocking reasons) for dashboards or audit evidence.

MCP

gate is also an MCP server, so an agent can ask "can this ship?" in one call — the unified verdict, not four separate tools.

gate mcp                 # stdio JSON-RPC server

npx @nugehs/gate mcp

Tools:

ToolReturns
gate_checkthe unified verdict for a repo (path, optional only/skip/ci/strict)
list_checksthe four checks gate runs, each with its domain and what it answers

Registry manifest: server.json (io.github.nugehs/gate).

Editor extension

The same normalized verdict drives a VS Code / Cursor extension (clients/vscode) — the gates, shifted left from CI into the editor:

  • a verdict cockpit and a checks tree in gate's own Activity Bar container;
  • inline diagnostics, hovers, Quick Fixes (mute / open docs) and CodeLens on located findings;
  • AI-native gating — an @gate chat participant, a gate_check tool agent mode can call before it says "done", and an MCP server provider — so the assistant writing the code is checked by the same gate as CI;
  • debounced run-on-save with in-flight cancellation, and multi-root support.

Roadmap

gate is the shared spine. The same JSON already drives the CLI, the --ci gate, the MCP server, and the editor extension above. Next client on the same JSON:

  • Web cockpit — a repo/PR verdict board over the JSON, unifying the four *-web sites.

License

MIT © Oluwasegun Olumbe

PopNx에게 묻기