프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

AgentRead

제작자: omarhassanatef버전 0.2.0i★ –i클라우드에서 실행
레지스트리 이름io.github.omarhassanatef/agentread

설치

개요

제작자가 쓴 설명(영어 원문)

Web pages to clean Markdown for AI agents. 5 free calls/day, then pay per call via x402 on Base.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://agentread.omar-cv.workers.dev/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http agentread https://agentread.omar-cv.workers.dev/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "agentread": {
      "url": "https://agentread.omar-cv.workers.dev/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "agentread": {
      "type": "http",
      "url": "https://agentread.omar-cv.workers.dev/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://agentread.omar-cv.workers.dev/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

아직 이 서버의 도구 목록을 읽지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 omarhassanatef 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    엔드포인트 응답

    아직 점검하지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요

  • … 아직 점검 안 함

    OAuth로 로그인

    아직 점검하지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    아직 점검하지 않았어요. 엔드포인트를 점검할 때 도구 목록을 읽어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32509개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32509개 중 73%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32509개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

AgentRead, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.2.0)은 13일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, Fomu MCP

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

Fomu MCP

제작자: gabrielmahia

Kenya government form guides: checklists, draft letters, eCitizen, Huduma, timelines. Sample data.

내 컴퓨터에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

AgentRead

Clean web content for AI agents, paid per request.

AgentRead is a Cloudflare Worker that turns public web pages into clean, structured Markdown for LLMs and autonomous agents. It is exposed as both an HTTP API and a remote MCP server. Paid operations are charged per successful request with x402 micropayments (USDC on Base). There are no accounts, API keys or subscriptions.

OperationHTTPMCP toolPrice (default)
Inspect a URLPOST /v1/inspectinspect_urlfree
Clean Markdown extractionPOST /v1/extractextract_url$0.003
Structured extractionPOST /v1/extract/structuredextract_url_structured$0.005

Free allowance: the first 5 successful extractions per day per client are free; just call without payment. Only successful extractions count, and the x-free-tier-remaining response header (MCP: _meta["agentread/free-tier"]) shows what's left. A global cap of 1,000 free calls per day protects the service. Prices and allowances are configuration, not code (see Configuration).

Use it now

Service: https://agentread.omar-cv.workers.dev · MCP: https://agentread.omar-cv.workers.dev/mcp · Listed in the official MCP Registry as io.github.omarhassanatef/agentread and on x402scan

Try the free inspection:

curl -s -X POST https://agentread.omar-cv.workers.dev/v1/inspect \

-H 'content-type: application/json' -d '{"url":"https://example.com/"}'

Add it to an MCP client (inspect_url works in any client; the paid tools need an x402-capable client such as @x402/mcp):

claude mcp add --transport http agentread https://agentread.omar-cv.workers.dev/mcp
{ "mcpServers": { "agentread": { "url": "https://agentread.omar-cv.workers.dev/mcp" } } }

Pay per call from code with an x402 client: see Paying with an x402 client and MCP. Agent-readable docs: /llms.txt, /openapi.json, /.well-known/x402.

Status: MVP, live.

- Production (Base mainnet, real USDC): https://agentread.omar-cv.workers.dev. Payments settle via the CDP facilitator to 0xb866dD8C8401438Efb29b538ec4df11b6b407Ce6.

- Testnet: no hosted testnet. npm run dev runs locally against Base Sepolia and the free x402.org facilitator.

What has been verified:

- Automated tests: all pass (237 tests, run inside the Workers runtime).

- Directory checks: both paid endpoints pass the CDP Bazaar validator (all preflight checks) and the AgentCash/x402scan discovery audit, and are registered on x402scan.

- Local smoke test (9/9): run against wrangler dev using the live x402.org facilitator. A genuinely signed payment from an unfunded wallet passes signature and requirement checks and is rejected for insufficient_balance, so the live wire path is proven up to the transfer itself.

- Production deployment: passes all smoke checks from GitHub Actions (gh workflow run CI). The live CDP facilitator authenticates AgentRead and verifies signed payments. The development network blocks the workers.dev IP range, hence the CI vantage point.

- Runs on the Workers Free plan. The deployed lite engine had no CPU-limit kills in about 180 benchmark requests on Cloudflare's edge (Free account); the readability engine was killed in up to 84% of them. See Extraction engines.

- Not yet exercised on the deployed edge: a *paid* extraction through the product Worker. The same extraction code was benchmarked on the edge, but no funded payment has gone through.

A funded payment has not yet been made (see Testnet payment demo). Read Limitations before relying on it.


Why an agent would pay for this

Raw HTML is mostly noise: navigation, cookie banners, ads, scripts, styling. An agent that fetches pages itself wastes tokens and has to maintain HTML cleaning, SSRF protection, encoding detection, redirect handling and size limits. AgentRead does that once and returns predictable, versioned JSON.

x402 lets an agent pay a fraction of a cent per call from its own wallet. There is no sign-up and no stored credentials. Failed extractions are not charged.

That is a hypothesis to validate, not a proven market. The service logs the numbers needed to test it (see Observability).

Architecture

AI agent ──HTTP (x402 headers)──┐          ┌── POST /v1/inspect ──────────────┐

▼ │ │ Cloudflare Worker (Hono) ▼ AI agent ──MCP Streamable HTTP──► /mcp ────┤ validate input + URL policy + DNS guard (x402 in _meta) │ (rejects bad input BEFORE any 402) │ │ ├── POST /v1/extract[/structured] │ │ └─ @x402/hono paymentMiddleware ──► facilitator /verify │ │ └── MCP paid tools ▼ └─ @x402/mcp wrapper shared operations (inspectUrl / extractUrl / extractUrlStructured) │ bounded fetch (manual redirects, re-validated each hop, timeout, byte cap) → linkedom → boilerplate removal → Readability → Turndown │ handler OK (2xx) → facilitator /settle → result + PAYMENT-RESPONSE handler failed → settlement cancelled → error (not charged)

  • One Worker, no database, no queues, no containers.
  • The HTTP API and MCP tools call the same operation functions and validate with the same zod schemas.
  • Payments use the official x402 v2 SDKs: @x402/hono for HTTP, @x402/mcp for MCP, and @x402/evm for the exact EVM scheme. No x402 protocol logic is reimplemented here.

More detail: docs/architecture.md · docs/payments.md · docs/security.md · docs/demo.md

API

Machine-readable docs: GET / (discovery: operations, prices, limits) and GET /openapi.json (OpenAPI 3.1, generated from the zod schemas the service validates with).

All errors use one shape:

{ "error": { "code": "blocked_destination", "message": "Internal, reserved, or loopback hostnames are not allowed.", "details": {} } }
GET /health
curl -s http://localhost:8787/health

{"status":"ok","service":"agentread","version":"0.1.0","environment":"development",

"payments":{"enabled":true,"network":"eip155:84532","networkName":"Base Sepolia"}}

POST /v1/inspect: free

Checks reachability and extractability before you pay. It downloads at most 64 KB and builds no DOM. Upstream problems (timeouts, 404s, non-HTML) are reported in the 200 body as reachable: false or a limitation. Only invalid or blocked URLs return 4xx.

curl -s -X POST http://localhost:8787/v1/inspect \

-H 'content-type: application/json' \ -d '{"url":"https://developer.mozilla.org/en-US/docs/Web/HTTP/Status/402"}'

{

"schemaVersion": "1.0", "operation": "inspect_url", "requestedUrl": "https://developer.mozilla.org/en-US/docs/Web/HTTP/Status/402", "normalizedUrl": "https://developer.mozilla.org/en-US/docs/Web/HTTP/Status/402", "hostname": "developer.mozilla.org", "reachable": true, "statusCode": 200, "finalUrl": "https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Status/402", "redirects": 1, "contentType": "text/html", "contentLength": 209180, "isHtml": true, "title": "402 Payment Required - HTTP | MDN", "mayRequireJavaScript": false, "extractionSupported": true, "limitation": null }

POST /v1/extract: paid

Request body (JSON, max 8 KB; unknown fields are rejected):

FieldTypeDefaultNotes
urlstringrequiredAbsolute public http(s) URL, default port, no credentials, no IP literal, ≤ 2048 chars
maxCharactersinteger20000100 – 100000; Markdown is cut at a paragraph boundary
includeLinksbooleantruefalse keeps link text but drops URLs and images

Without payment, the response is HTTP 402. The PAYMENT-REQUIRED header carries the base64 x402 PaymentRequired object; the JSON body is a human/agent-readable summary:

curl -si -X POST http://localhost:8787/v1/extract \

-H 'content-type: application/json' -d '{"url":"https://example.com/"}'

HTTP/1.1 402 Payment Required

payment-required: eyJ4NDAyVmVyc2lvbiI6Miwi...

{"error":{"code":"payment_required","message":"This operation costs $0.003 (USDC on Base Sepolia). ...",

"details":{"operation":"extract_url","price":"$0.003","network":"eip155:84532","x402Version":2}}}

Decoded PAYMENT-REQUIRED (accepts[0]): {"scheme":"exact","network":"eip155:84532","amount":"3000","asset":"0x036CbD53842c5426634e7929541eC2318f3dCF7e","payTo":" ","maxTimeoutSeconds":120,...}. 3000 is $0.003 in 6-decimal USDC.

With a valid PAYMENT-SIGNATURE header, the response is 200 with a PAYMENT-RESPONSE header containing the settlement receipt:

Real output for https://example.com/ (captured Oct 2026 by running the operation code directly):

{

"schemaVersion": "1.0", "operation": "extract_url", "requestedUrl": "https://example.com/", "finalUrl": "https://example.com/", "title": "Example Domain", "description": null, "markdown": "This domain is for use in documentation examples without needing permission. This is not a service; avoid relying on it for testing and monitoring purposes.", "headings": [], "truncated": false, "extraction": { "method": "readability", "statusCode": 200, "contentType": "text/html", "charset": "utf-8", "redirects": 0, "bytesFetched": 577, "characters": 156, "totalCharacters": 156, "words": 25, "warnings": [], "durationMs": 854 } }

extraction.method is one of readability, main-content-fallback, body-fallback, plain-text.

POST /v1/extract/structured: paid

Same request body as /v1/extract. Returns metadata, Markdown, headings and links separately:

{

"schemaVersion": "1.0", "operation": "extract_url_structured", "requestedUrl": "...", "finalUrl": "...", "metadata": { "title": "...", "description": "...", "canonicalUrl": "...", "language": "en-GB", "siteName": "...", "byline": "...", "publishedTime": "2026-03-14T09:00:00Z" }, "markdown": "...", "headings": [{ "level": 2, "text": "Zones of the intertidal" }], "headingsTruncated": false, "links": [{ "text": "official tide tables", "url": "https://example.org/tide-tables" }], "linksTruncated": false, "truncated": false, "extraction": { "...": "same as extract_url" } }

Missing metadata is null; nothing is guessed. includeLinks affects only the Markdown; links is always returned (max 200, deduplicated, absol

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요

PopNx에게 묻기