프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Numbers Online — phone intelligence

제작자: numbers-online버전 1.0.0i★ –i클라우드에서 실행
레지스트리 이름online.numbers/numbers-online

설치

개요

제작자가 쓴 설명(영어 원문)

Read-only phone intelligence for AI voice agents — line type, risk, DNC, signed receipts.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 채팅 및 이메일

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://numbers.online/api/v1/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http numbers-online https://numbers.online/api/v1/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "numbers-online": {
      "url": "https://numbers.online/api/v1/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "numbers-online": {
      "type": "http",
      "url": "https://numbers.online/api/v1/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://numbers.online/api/v1/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

아직 이 서버의 도구 목록을 읽지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 8일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 numbers.online 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    엔드포인트 응답

    아직 점검하지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요

  • … 아직 점검 안 함

    OAuth로 로그인

    아직 점검하지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    아직 점검하지 않았어요. 엔드포인트를 점검할 때 도구 목록을 읽어요

채팅 및 이메일 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1847개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1847개 중 13%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1847개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Numbers Online — phone intelligence, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.0.0)은 5개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Vexa, emailmd, MCP WhatsApp Cloud

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Vexa

제작자: Vexa-ai

Meeting bot and transcripts for Google Meet, Teams and Zoom. Live or after, speakers labelled.

클라우드에서 실행★ 2,949Apache-2.02개월 전 업데이트
설치

emailmd

제작자: anypost

Render markdown into email-safe HTML, lint drafts for deliverability problems, and preview emails.

컴퓨터 또는 클라우드★ 1,385MIT32일 전 업데이트
설치

MCP WhatsApp Cloud

제작자: codespar

MCP server for WhatsApp Cloud API (Meta) — messages, media, and templates via Graph API

내 컴퓨터에서 실행★ 277MIT5개월 전 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Numbers Online — phone-intelligence MCP server

A hosted, read-only Model Context Protocol server that gives an AI voice agent phone intelligence in a single call: *who is this inbound caller, and is this outbound number one to think twice about dialing* — before it burns agent minutes.

  • Endpoint: POST https://numbers.online/api/v1/mcp (Streamable HTTP, JSON-RPC 2.0)
  • Transport: remote / hosted — nothing to install or run. Point your agent at the URL.
  • Auth: Authorization: Bearer for tool calls; discovery is public.
  • Docs: https://numbers.online/docs/integrations · Site: https://numbers.online

Positioning. Every output is an advisory, low-confidence supplementary signal.

The calling agent keeps every routing and dialing decision and remains responsible for

compliance. Nothing here asserts that a call is lawful, unlawful, "safe", or "spam".


Tools

Four read-only tools (all annotated readOnlyHint, idempotentHint). Discover them live with tools/list (no auth required).

ToolReturnsBilled
phone_lookupFull bundle — validity, formatting, line type, range carrier, country, caller name (CNAM where available), STIR/SHAKEN verstat, a labeled spam signal, first-party DNC signal, signed receiptbundled per-call
caller_riskSpam signal + verstat + first-party DNC signal + receipt (no name dip)bundled per-call
line_typeDeterministic only — validity, line type (mobile / fixed line / VoIP / …), carrier, country, formattingfree
dnc_checkFirst-party do-not-contact signal + signed receiptfree
About the DNC signal

The DNC signal is first-party, consent-first: it reflects a do-not-contact preference registered and verified by the number's own owner inside Numbers Online. It is not a copy, mirror, or replica of any government or licensed do-not-call registry. The values:

  • `SUPPRESS` — the owner registered a do-not-contact preference for this channel.
  • `NO_MATCH` — no suppression preference on record (absence of suppression is not consent).
  • `UNKNOWN` — the number couldn't be evaluated.

Treat it as a supplementary input to your own TCPA process, never a verdict that a call is lawful. (Reassigned-number status is inherently a carrier/FCC dataset and is intentionally not offered as a first-party signal — there's no reassigned_check tool.)


Connect

Any MCP client (Claude Desktop, Claude Code, IDEs)

Add a remote server pointing at the endpoint. Example mcp.json fragment:

{

"mcpServers": { "numbers-online": { "type": "streamable-http", "url": "https://numbers.online/api/v1/mcp", "headers": { "Authorization": "Bearer YOUR_API_KEY" } } } }

A key needs the mcp use case. initialize, ping, and tools/list work without auth (capability discovery); tools/call is fail-closed and requires the key.

Vapi

Register Numbers Online as an MCP tool — the transport literal is `shttp` (see integrations/mcp/vapi-mcp-tool.json). A Vapi custom-function-tool alternative lives at integrations/vapi/numbers-online-tool.json.

Retell

Point your agent's call_inbound webhook at the drop-in config in integrations/retell/inbound-webhook.json. It always returns HTTP 200 within Retell's budget (fail-open) so a slow lookup never keeps the caller ringing.

Full walkthrough: docs/ai-voice-agents.md.


Quick smoke test

# discover tools (no auth)

curl -s https://numbers.online/api/v1/mcp \ -H 'content-type: application/json' \ -d '{"jsonrpc":"2.0","id":1,"method":"tools/list"}'

call a tool (needs an mcp-scoped key)

curl -s https://numbers.online/api/v1/mcp \ -H "Authorization: Bearer $KEY" -H 'content-type: application/json' \ -d '{"jsonrpc":"2.0","id":2,"method":"tools/call","params":{"name":"phone_lookup","arguments":{"number":"+14155552671"}}}'

Runnable reference clients (zero-dependency) are in examples/ — Node and Python.


Signed receipts (verifiable "checked as of T" evidence)

Every billable answer can carry a receipt_id and an Ed25519 response_signature. Fetch the receipt later — no API key required, the id is the capability:

GET https://numbers.online/api/v1/receipts/{id}

No raw phone number is stored — only number_hash = sha256(E.164). Verify with the public key at GET https://numbers.online/api/v1/publickey. A receipt is verifiable evidence that a status was *checked at a point in time* — not proof that dialing was lawful. Treat a receipt id as sensitive (a phone number is a small keyspace, so the hash is bindable to a candidate number).


Privacy

Raw phone numbers are never logged or stored; they are hashed (sha256). The MCP path is read-only and stateless. Privacy policy: https://numbers.online/privacy

Pricing

The full bundle is metered as one bundled per-call dip (validation + line type + risk + first-party DNC in a single call). line_type and dnc_check are free. See https://numbers.online for current rates.


Developer: Evergrow · Product: Numbers Online · Contact: contact@numbers.online · License: MIT

PopNx에게 묻기