프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Reelsaw

제작자: osbytes버전 0.32.1i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.osbytes/reelsaw

설치

개요

제작자가 쓴 설명(영어 원문)

Drive a self-hosted Reelsaw: turn long videos into vertical clips, edit, re-render and export them.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "reelsaw": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "ghcr.io/osbytes/reelsaw:0.32.1",
        "reelsaw",
        "mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add reelsaw -- docker run -i --rm ghcr.io/osbytes/reelsaw:0.32.1 reelsaw mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "reelsaw": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "ghcr.io/osbytes/reelsaw:0.32.1",
        "reelsaw",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "reelsaw": {
      "type": "stdio",
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "ghcr.io/osbytes/reelsaw:0.32.1",
        "reelsaw",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 osbytes 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32531개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32531개 중 100%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32531개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Reelsaw, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.32.1)은 오늘 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, defrr

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

defrr

제작자: defrr-com

RevRec schedules, renewals, credits, usage pricing, multi-currency, back-dated. Saves drafts.

클라우드에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Self-hosted, AI-powered long-form → short-form video clipper. Paste a YouTube link or upload a video; Reelsaw transcribes it, asks an LLM for the most clippable moments, then renders vertical 9:16 clips with word-highlight captions and a hook overlay. A hosted service at app.reelsaw.com runs the same code (Free, then $12 / $29 / $59 a month, metered in source minutes).

Pure TypeScript. Any AI vendor via the AI SDK. One-step deploy with Docker Compose.

One video through the five queues: ingest → transcribe → refine ×3 → pick moments → render. A worker restarts mid-render and resumes from its last save. Full-quality MP4 , or play it on reelsaw.com .

demo-framing.mp4

Auto reframing in one clip: split → face → stack → fit

Features

Pipeline

  • Any AI vendor – language model, transcription model and caption-alignment model are each a provider:model string: OpenAI, Anthropic, Google, Groq, Deepgram, AssemblyAI, Vercel AI Gateway, or any OpenAI-compatible server (Ollama, vLLM, LM Studio, local Whisper servers). Fully local with no API keys is supported.
  • Research-backed clip selection – map → pool → rank: the transcript is chunked at long pauses with 20% overlap (no "lost in the middle" on long videos), every standalone moment is collected per chunk in parallel, candidates are snapped/deduped, then scored on a rubric (hook / value / flow / shareability, plus relevance with a focus) as the median of k samples, and the top 10 get K sliding pairwise head-to-head passes (PRP-Sliding-K; ANALYZE_PAIRWISE_PASSES, default 3 so the top 3 you see first are placed reliably) with positions swapped to cancel judge bias. Cost: at most Σ(n−1−p) pairs × 2 calls, i.e. 48 calls for the top 10 with 3 passes (18 with 1); pairs met twice are judged once. No target count: in auto mode weak picks are dropped by a gate relative to the run, not a fixed number, because pointwise scores do not transfer between judge models: a clip is dropped below max(ANALYZE_MIN_SCORE_FLOOR = 25, median − ANALYZE_SCORE_MAD_K = 1 × MAD) of the pooled rubric totals, and the best clip is always kept (ANALYZE_SCORE_RULE=absolute restores the old fixed 45). The threshold and its median/MAD are in the project's candidates artifact. Candidates whose scoring failed are never compared with rubric totals; they only fill in when fewer than 3 scored clips survive. Optional "at most N" cap, and "Find clips about …" keeps only on-topic moments. Click a clip's score for the breakdown. ANALYZE_JUDGE_MODEL lets a different model score and compare (less self-preference than judging its own hooks). ANALYZE_CONCURRENCY, ANALYZE_SCORE_SAMPLES, ANALYZE_PAIRWISE tune cost (auto: 1 call at a time, 1 sample, no pairwise for a self-hosted judge; 4 / 3 / on for cloud).
  • Clean transcripts – names are fixed from vocabulary hints and a constrained LLM correction, and fillers, repetitions and false starts are cut with jump cuts. Every cut is located by forced alignment and checked by listening to the seam, so karaoke highlights land on the syllable. Each fix shows inline in the transcript with accept/reject, and long pauses can be shortened (details below).
  • Smart 9:16 reframing – UltraFace (1.2 MB ONNX, CPU, ~7 ms/frame via onnxruntime-node) samples each clip at 4 fps and picks a layout per segment (clips are split at scene cuts and face-presence changes, so a picture-in-picture intro can be "fit" and the talking head after it "face"; shot cuts are detected on every clip, and a multi-camera edit that alternates a close-up with a wide shot every second or two changes layout at each cut): face (crop follows the speaker with "heavy tripod" smoothing: dead zone, capped pan speed, instant snap at scene cuts), split (two speakers stacked), stack (slides/screen on top, the webcam tile below — the picture-in-picture box of a Zoom, Teams, Meet or OBS recording, not a face-sized crop that reaches into the slides), or fit (whole frame over a blurred background when there is no face, e.g. graphics and b-roll, or when three or more people share the frame). With two people in a wide shot the crop follows whoever is talking (mouth motion correlated with the audio envelope, minimum 2.5 s per shot), falling back to a split when detection isn't confident. Override per project, per clip or per section, including a hand-set crop. Reference for every layout, its triggers, caveats and fixtures: docs/LAYOUTS.md.
  • Captions – AI-picked key words per clip coloured and enlarged (editable in the editor), readability limits (≈2 short lines, comma/sentence breaks, a line stays up long enough to read: at least 0.7 s, 0.3 s per word and 20 characters per second), ASS karaoke word highlight (any colour), boxed, or outlined; size, words on screen (1 = one word at a time), uppercase; hook overlay with its own duration. Caption and hook positions are free x/y set by dragging on a live 9:16 preview that uses the renderer's crop math and font metrics, with a platform safe-zone overlay. In split and stack sections that last 2.5 s or more, captions sit on the line between the two panes instead of on the lower speaker (a switch turns it off). Project-wide defaults, per-clip overrides. Burned in with ffmpeg + libass.

Editing

  • Workspace and clip editor – source player and clickable transcript on the left, clips streaming in on the right as they render, with score, layout badge, post caption + hashtags copy and download. The editor has a live preview of the source with the clip's framing and captions and a multi-lane timeline (ruler, transcript words, clip range, layout track, layers) with zoom, snapping to words/scene cuts/playhead, nudge buttons, typed timestamps and I/O keys for frame-accurate trims. Split the layout track (⌘/Ctrl+B, the Split button, a double-click or the right-click menu) into sections that are Auto or forced to face/split/stack/fit/centre; drag the picture to re-centre a section; right-click for Set crop… (a box on the source, or crop / crop2 / contentCrop on update_clip); "Use for all clips…" copies one clip's framing to the project (apply_framing). Add, drag and remove transitions; ⌘/Ctrl+Z / ⇧⌘Z undo and redo every edit.
  • Deletes can be undone – deleting a project or a clip (card ⋯, the selection bar, the editor, ⌘K) stops its work and hides it. The toast always offers Undo, Delete forever, and See deletions. Everything restorable lives on Deleted (account menu) as one selectable list: each row says when it was deleted and when it is deleted forever, and a compact bar restores the selection or deletes it forever. Storage still counts until you delete it forever (MCP list_deleted plus purge_project / purge_clip / purge_asset / purge_layer_template; reelsaw purge-project, purge-clip, library purge, templates purge). Minutes, hourly creates and first-video-free are never refunded. Re-picking moments keeps every clip you made or edited (text, bounds, framing, style, intro/outro) and only replaces untouched AI picks, which can be restored too. The same through MCP (delete_clip, delete_clips, restore_project, restore_clip, list_deleted) and the CLI (reelsaw deleted, restore, delete-clip, delete-clips, restore-clip, purge, purge-project, purge-clip).
  • Learns from your decisions – what you accept, reject, cut, correct and edit is kept in a decision log (with the words or clip text it was about, the models that proposed it and a fingerprint of the source video) that outlives deleted projects: cuts you rejected are shown to the filler detector as examples to keep, and an export turns your decisions into eval cases (reelsaw decisions export, export_decisions, the decisions suite). Settings → Learning turns it off or forgets everything; deleting a project (or "Delete forever") can forget what it learned from that project, applied when it is purged, even automatically. It never leaves your instance. See docs/specs/decision-log.md.
  • Command palette and bulk export – ⌘K searches projects and clips with status, length and age, opens a row's actions (open, export, resume, retry failed clips, re-run refine, re-render, download, delete project or clip), takes pasted links (one project each, or opens the existing one) and offers retry-all shortcuts. "Export all" zips every rendered clip with platform-ready metadata: a paste-ready .txt (title, description, tags, caption), a .youtube.json (YouTube Data API v3 videos.insert body, private by default) and a .tiktok.json (Content Posting API post_info, SELF_ONLY) per clip, plus manifest.json, clips.csv (with rendered duration) and a README. Descriptions carry a timestamped link to the exact moment in the parent video.
  • Share links – a clip's ⋯ menu copies a link anyone can download it from without signing in (the project and selection menus do the same for the zip), for schedulers (Buffer, Metricool), Instagram's video_url, Zapier/Make file fields or a person. The link answers with the file itself (a plain 200, no redirect), serves the clip's latest render, lasts 90 days by default (MEDIA_LINK_TTL_DAYS; "Never" where MEDIA_LINK_ALLOW_NEVER), and can be revoked one at a time, per clip or project, or all at once under Settings → Share

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요

PopNx에게 묻기