프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Pitbridge

제작자: ToolstackVault버전 0.2.2i★ –i내 컴퓨터에서 실행
레지스트리 이름com.pitbridge/pitbridge

설치

개요

제작자가 쓴 설명(영어 원문)

Local-first MCP bridge for NinjaTrader 8 behind a deterministic guardrail engine.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • PyPIPython의 uv 설치(uvx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "pitbridge": {
      "command": "uvx",
      "args": [
        "pitbridge",
        "mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add pitbridge -- uvx pitbridge mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "pitbridge": {
      "command": "uvx",
      "args": [
        "pitbridge",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "pitbridge": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "pitbridge",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 pitbridge.com 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32384개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32384개 중 17%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32384개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Pitbridge, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.2.2)은 4개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, 오늘냥이 (Oneul Nyangi)

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

오늘냥이 (Oneul Nyangi)

제작자: nyangi.today

Real cat photos, diaries, profiles, age and food reference calculators, and breeds.

클라우드에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

PitBridge

A local-first MCP bridge for NinjaTrader 8, with hard risk limits your AI cannot bypass.

PitBridge connects an AI agent (Claude Code, Claude Desktop, or your own script) to a NinjaTrader 8 futures account through a daemon that runs on your own machine. Every order the agent asks for passes through a deterministic guardrail engine first. The guardrails are default-on, they live in code rather than in prompts, and the agent has no tool to weaken them, unlock live trading, or release the kill switch.

We build rails, not alpha. PitBridge does not tell you what to trade.

What it is

  • A local-first daemon (Python 3.12) that speaks MCP (stdio and streamable HTTP), a REST API, and a WebSocket event feed. It runs on macOS, Linux, or Windows.
  • A deterministic guardrail engine: pure, synchronous checks (daily-loss halt, position caps, trading windows, rate limits, a kill switch, and more) that every order must pass before it can reach the broker.
  • A thin NinjaTrader 8 AddOn (C#) that connects out to the daemon and places orders through the official NinjaTrader.Cbi Account API. The AddOn is deliberately dumb: all safety lives in the daemon.
  • An append-only, hash-chained audit log that records every request, decision, and outcome, and can tell you exactly why any order was allowed or blocked.

What it is NOT

Read this section before anything else.

  • Not a broker or an exchange. PitBridge routes orders you (or your agent) create to your existing NinjaTrader account. It holds no funds and executes nothing itself.
  • Not signals, strategies, or alpha. PitBridge ships no trading logic. It will not tell you what, when, or how much to trade. That is your job, or your agent's.
  • Not financial or investment advice. It is trading infrastructure.
  • Not a guarantee of prop-firm compliance. You configure the limits that match your firm's rules. PitBridge helps you encode and enforce them locally, but you remain responsible for staying within your firm's terms. We make no compliance guarantee.
  • Not a cloud order relay. Orders, keys, and positions never touch our servers. There is no PitBridge account in the order path.
  • Not autonomous. Enabling live execution is an operator-only ritual at the command line. The agent cannot arm live trading, and it cannot lift a kill.

Architecture

The entire order path is local. PitBridge's own cloud (the marketing site, the docs, software updates) is never in it.

   AI agent   (Claude Code / Claude Desktop / your own script)

│ │ MCP (stdio or HTTP) REST /v1/* WS events ▼ PitBridge daemon ← runs on YOUR machine │ │ frozen pipeline (no code path skips it): │ schema → permission → GUARDRAILS → confirm → submit → audit ▼ Guardrail engine (deterministic, default-on, not reconfigurable by the agent) │ │ WebSocket on :8873 (the AddOn dials OUT; the NT8 box never listens) ▼ NT8 AddOn (C#, .NET 4.8, next to NinjaTrader 8 on Windows) │ │ NinjaTrader.Cbi Account API (close / flatten are strictly reduce-only) ▼ NinjaTrader 8 → your broker / prop account (CQG, Rithmic, ...)

PitBridge's own cloud is NOT on this path. Orders, keys, and positions never leave your machine(s).

Two run modes:

  • Localhost (default): the daemon and NinjaTrader run on the same Windows machine, bound to 127.0.0.1.
  • Paired: the daemon runs on, for example, your Mac, and the NinjaTrader AddOn connects out to it over your own private network (Tailscale / LAN). This is the "runs on your Mac, your Windows box, or both" setup. Non-localhost binds are refused unless paired mode is explicitly enabled and a pairing token is configured.

Safety model in short

  • Deterministic guardrails. The engine is a set of pure functions with no I/O and no LLM in the loop: check(request, state, now) returns Allow, Block (with a typed reason code), or RequireConfirm. Given the same inputs it always returns the same decision, and that decision is testable.
  • A frozen pipeline. Every order takes exactly one path: schema validation, then permission (read-only / paper / live), then the guardrail chain, then an optional human-confirm gate, then submit, then an audit append. There is no route from the agent surface to the broker that skips it. A structural test in CI fails the build if any code tries.
  • The agent cannot reconfigure safety. Limits live in an on-disk config that is checksum-verified. No MCP tool can edit config, raise a limit, un-kill, or arm live trading. Those controls exist only at the operator's command line.
  • Local-first. The daemon runs on your machine(s). Orders, keys, and positions never reach a PitBridge server.
  • Kill switch. A file, the CLI, or a REST call can engage it instantly. Only the CLI (a human at the keyboard) can release it. De-risking (cancel, close, flatten) is deliberately still allowed under a kill, so you can always get flat.
  • Tamper-evident audit log. Append-only, hash-chained JSONL with an out-of-file anchor. pitbridge audit why explains any order; pitbridge audit verify proves the chain is intact and catches edits, truncation, or a wiped tail.

The guardrails

Twelve v0 guardrails, each its own module, all table-tested. The chain runs in a frozen order: the kill switch is checked first, the human-confirm gate last.

  1. Kill switch: file, CLI, or REST engages it; release is CLI-only, never an agent tool.
  2. Daily-loss halt: per-account day ledger with New-York rollover; can latch sticky for the rest of the day once breached.
  3. Profit lock: stop trading for the day after a configured profit.
  4. Max contracts per order: reject any single order above the cap.
  5. Max position per instrument and account: cap net exposure, and refuse an over-cap position flipping to an equally over-cap opposite side.
  6. Instrument allowlist: only configured contracts may be traded.
  7. Trading windows and holiday calendar: per-account timezone, holiday and early-close aware.
  8. Cooldown: a minimum spacing after a loss and/or after an order.
  9. Order rate limits: caps per minute, per hour, and per day.
  10. Duplicate-order protection: same account, instrument, side, and quantity within N seconds is rejected.
  11. Link-down block: if the heartbeat to the AddOn goes stale, new orders hard-reject rather than queue against a dead link.
  12. Human-confirm gate: parks an order as PENDING_CONFIRM, pings a notifier, and waits for pitbridge confirm (or a REST approval); auto-rejects after 60 seconds.

Open-core boundary

PitBridge is open-core. The safety kernel is open so it can be read and trusted. Live execution and the operational suite for running many accounts are the paid tier.

Open source (free)Pro (paid)
The daemon and the full guardrail engineLive-execution unlock (the private LiveExecutionProvider plugin)
The MCP, REST, and WebSocket agent surfaceThe advanced guardrail suite and prop-firm rule packs
Read-only tools and paper trading (against the fake AddOn / simulation)Multi-account fan-out (one tool call, N accounts)
The CLI and the hash-chained audit logThe human-confirm UI and audit export

This is licensing-gating, not DRM. The core is fully functional for read-only and paper use on its own. Live trading requires the Pro plugin plus a deliberate, operator-only arm-live step.

Quickstart

You can run the complete daemon on a Mac today, with no NinjaTrader install, no Windows box, and no market data. A fake AddOn simulator stands in for the real C# AddOn, so you can watch the guardrails pass good orders, block bad ones with a typed reason, stop everything with the kill switch, and explain every decision from the audit log.

cd daemon

uv sync --extra dev uv run pitbridge run --config ./config.toml # terminal A uv run python ../tools/fake_addon.py \ # terminal B --host 127.0.0.1 --port 8873 --token pb_pair_demo --account Sim101

Then place a paper order over REST or wire up Claude as the MCP client and ask it in plain language. The full walkthrough, a ready-to-paste config, the Claude Desktop / Claude Code MCP setup block, five test scenarios, and a "try to break it" section are in [docs/testing-on-mac.md](docs/testing-on-mac.md).

Everything in the quickstart is paper / simulation. See that guide's "What this does and does not prove" for the honest boundary.

Status and roadmap

PitBridge is early and pre-launch. We are honest about what exists versus what is planned.

Built and tested today (paper / simulation only):

  • the daemon core, the full guardrail engine (all twelve guardrails), the day ledger, and the hash-chained audit log;
  • the MCP server (nine tools), the REST API, the WebSocket event feed, and the CLI;
  • a scripted fake AddOn for end-to-end and chaos testing;
  • a table-driven test suite (300+ tests) that runs on macOS, Linux, and Windows in CI, including prompt-injection and no-bypass tests.

In progress:

  • the real C# NinjaTrader 8 AddOn (order routing on a Sim101 account), with close and flatten implemented as strictly reduce-only.

Planned:

  • shadow-mode validation, running PitBridge in parallel with our own live prop-trading operation to prove order-intent parity before it ever routes a live order;
  • a supervised, operator-gated live migration;
  • the open-core public launch, the website, and full docs;
  • additional platforms (Tradovate, ProjectX / TopstepX) via thin adapters.

No live account has been traded through PitBridge yet. Live routing sits behind an operator-only ritual and is not part of the current build.

Documentation

  • docs/architecture.md: the binding architecture and safety spec.
  • docs/testing-on-mac.md: run and test the daemon on a Mac against the fake AddOn.
  • SECURITY.md: how to report a vulnerability.
  • CONTRIBUTING.md: how to contribute, and the rules for safety-critical changes.

Disclaimers

Trademarks. NinjaTrader is a registered trademark of NinjaTrader Group, LLC. CQG, Rithmic, and any prop-firm names are trademarks of their respective owners. PitBridge is an independent project and is not affiliated with, endorsed by, or sponsored by NinjaTrader Group, LLC, any data or clearing provider, or any prop firm. Platform names are used nominatively, only to describe compatibility.

Not financial advice. PitBridge is trading infrastructure, not financial, investment, or trading advice. It provides no signals, strategies, or recommendations.

Risk. Trading futures involves substantial risk of loss and is not suitable for every investor. You are solely responsible for your own trading decisions and for staying within the terms of any broker or prop firm you use.

CFTC Rule 4.41 (hypothetical and simulated performance). Any results, examples, or simulated data shown for PitBridge are hypothetical or simulation-based. Simulated performance has inherent limitations: unlike a live record, simulated results do not represent actual trading, and because the trades were not actually executed, they may under- or over-compensate for factors such as lack of liquidity. No representation is being made that any account will or is likely to achieve profits or losses s

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요

PopNx에게 묻기