프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

SanAlert

제작자: plrojek버전 1.1.0i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.plrojek/sanalert-mcp

설치

개요

제작자가 쓴 설명(영어 원문)

Unofficial threat level from the air for a place in Poland, worked out on your own computer.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • PyPIPython의 uv 설치(uvx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "sanalert": {
      "command": "uvx",
      "args": [
        "sanalert-mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add sanalert -- uvx sanalert-mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "sanalert": {
      "command": "uvx",
      "args": [
        "sanalert-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "sanalert": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "sanalert-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 plrojek 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32715개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32715개 중 87%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32715개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

SanAlert, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.1.0)은 5일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, First Sale Scout

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211그저께 업데이트
설치

First Sale Scout

제작자: firstsale.pro

Playbooks and a 14-day checklist for founders winning their first paying customers.

클라우드에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

SanAlert for AI assistants

The unofficial threat level from the air for a place in Poland, for an AI assistant that can run a local MCP server (Claude Code, Claude Desktop and others). Ask it "what is the level in Przemyśl?" and the assistant gets the answer the website would show for that place. Not an official warning system: it does not replace sirens, Alert RCB or instructions from the authorities.

What it does, and what it sends

  • It runs on your computer and talks to the assistant over stdio.
  • When the assistant asks about a place, it fetches https://api.sanalert.pl/v1/state, the same public document the website and the apps read: at most once every 5 s, with If-None-Match and the User-Agent SanAlert-MCP/ . Once per run it fetches the public grid (/v1/grid/1.json) to find the place's ~11 km square and its voivodeship.
  • It looks the place's level up in that document with the rules SanAlert's website and apps follow (sanalert.pl/jak-to-dziala). The place stays on your computer: no request carries it, and a town's name is never looked up online.
  • The privacy page says the same (sanalert.pl/prywatnosc, "Serwer SanAlert dla asystentów AI"). Terms (Regulamin, Умови).

The tool

sanalert_level takes place, one of the website's towns (Przemyśl, Lublin, Rzeszów, Chełm and the rest of its list; Polish letters optional, and Warsaw and Cracow work too), or latitude and longitude, and language: pl, en or uk.

FieldWhat it is
levelquiet, activity, approaching, near, no_data or out_of_range
level_name, saythe level's name and the website's sentence under it, in the chosen language
reason_code, kind, km, eta_min, course_known, lost_at, oblast, raion, threatwhat raised the level, as the website shows it
risk, confidence, degradedas in the state; degraded means the data may be delayed
data, no_data_reasons, no_data_codes, data_age_s, generated_at, expires_atwhether the level can be trusted now, and why not: no_data_codes (1.1.0) are not_ready, stale, levels_not_valid, health_unknown (as the remote server's), grid_unreadable, state_unreadable, no_time, unknown_level; after expires_at (generated_at + 60 s) the answer is no data
placethe town or the point, its square (cell) and voivodeship
officialRCB and RSO messages in force for the voivodeship; null while that cannot be told. Since 1.1.0 each also has the remote server's class, text, regions_in_force and powiats
notice, attribution, pass_throughwhat has to stay with the data wherever it is shown

The towns place accepts are also a resource, sanalert://towns (1.1.0), with their coordinates.

Blind is not calm. When the document is missing, cannot be read or is older than 60 s, or the grid cannot be read, the level is no_data, never quiet, and say says so. The age is never less than the time the server has held the document, so a computer clock that runs behind cannot keep an old "quiet" fresh while the API is down. A point outside Poland's grid is out_of_range. A name that is not on the list is an error that names the list: give coordinates instead.

For the whole of Poland (the state summarised, official messages of the last 24 hours, night reports, the reliability record) SanAlert runs a remote MCP server, https://api.sanalert.pl/mcp. It takes no place.

Install

It needs uv.

Claude Code:

claude mcp add sanalert -- uvx sanalert-mcp

claude mcp add --transport http sanalert-poland https://api.sanalert.pl/mcp # optional: the whole of Poland

Or both at once, as a Claude Code plugin: /plugin marketplace add plrojek/agent-skills, then /plugin install sanalert@plrojek. Straight from GitHub instead of PyPI: uvx --from git+https://github.com/plrojek/sanalert-mcp sanalert-mcp.

Claude Desktop (claude_desktop_config.json):

{

"mcpServers": { "sanalert": { "command": "uvx", "args": ["sanalert-mcp"] } } }

Conditions of use

Whoever shows or repeats the data keeps notice visible with it and a visible link to every attribution entry, always refers readers to the official air-raid alarms (sirens, Alert RCB, the instructions of the authorities), keeps a visible link to NEPTUN (https://neptun.in.ua, for example "Дані: Карта повітряних тривог — NEPTUN") next to the level, never turns no data into quiet, and says that the level is SanAlert's inference, not an official warning. In full: terms and the API description.

Development

uv run pytest runs the tests; none of them goes online.

Three files in src/sanalert_mcp/ are generated, never edited by hand:

  • core.py is the Home Assistant integration's core.py, the same rules in the same words;
  • towns.json is the apps' town list (ios/SanAlertKit/Sources/SanAlertKit/Resources/towns-v1.json, made from the website's web/src/lib/cities.ts);
  • api_texts.json is the API's notice, attribution and pass-through (api/sanalert/state.py, api/sanalert/mcp_server.py).

python scripts/sync.py copies the first two and python scripts/sync.py --check fails on any difference (CI runs it). The API's tests fail when api_texts.json no longer matches the API.

The source is integrations/mcp/ in SanAlert's own repository; the public repository (github.com/plrojek/sanalert-mcp) is a copy of it, refreshed with each release, so a fix in core.py reaches users with the next release.

License

MIT, Applied AI sp. z o.o.

PopNx에게 묻기