프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요 로그인

Probarion

✓ 브랜드 이름 GitHub · github.com/probarion

제작자: probarion버전 0.1.2i★ 1 (저장소 전체의 별)i내 컴퓨터에서 실행공식 사이트 ↗
레지스트리 이름io.github.probarion/probarion

설치 방법

할 수 있는 일

Let an AI agent pay in USDC on NEAR only inside owner-signed mandates, with a signed ledger.

제작자가 쓴 원문

  • 연결 방식 내 컴퓨터에서 실행
  • 계정 또는 키 PROBARION_AGENT_KEY, PROBARION_LEDGER_KEY 필요 · 설정 1개 입력 필요(PROBARION_VAULT_ID)
  • 분류 회계, 재무 및 세금

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수12/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

Probarion 설치해 줘. https://mcp.popnx.com/i/probarion.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 15일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

Probarion 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PROBARION_VAULT_ID) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server Probarion을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "probarion": { "command": "npx", "args": [ "-y", "@probarion/mcp" ], "env": { "PROBARION_VAULT_ID": "your-value", "PROBARION_AGENT_KEY": "your-value", "PROBARION_LEDGER_KEY": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PROBARION_AGENT_KEY, PROBARION_LEDGER_KEY, PROBARION_VAULT_ID에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Probarion의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Probarion에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    Probarion 사이트 열기 ↗

  3. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • PROBARION_VAULT_ID vault 계정(예: acme.vaults.probarion.testnet)입니다. .near로 끝나는 이름은 메인넷, .testnet으로 끝나는 이름은 테스트넷입니다.
      영어 원문 보기The vault account, for example acme.vaults.probarion.testnet. A name ending in .near is on mainnet, one ending in .testnet on testnet

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  4. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  5. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "probarion": {
          "command": "npx",
          "args": [
            "-y",
            "@probarion/mcp"
          ],
          "env": {
            "PROBARION_VAULT_ID": "your-value",
            "PROBARION_AGENT_KEY": "your-value",
            "PROBARION_LEDGER_KEY": "your-value"
          }
        }
      }
    }

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  6. Claude를 끄고 다시 열기

  7. 해 보기

    Probarion을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Probarion을 쓰고 있다고 하거나 답에 Probarion 도구 이름이 나오면 연결된 거예요

추가 설정 5개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • NEAR_NETWORK mainnet 또는 testnet. vault ID가 .near나 .testnet으로 끝나지 않을 때만 필요하며, 설정하는 경우 vault ID의 끝부분과 일치해야 합니다.
    영어 원문 보기mainnet or testnet. Needed only when the vault id ends in neither .near nor .testnet; when set, the vault id's ending must agree with it
  • PROBARION_KEYS_FILE Absolute path of the keys file that probarion-mcp init wrote, which must exist. Default ~/.probarion/ /keys.json, used when it exists. With no keys the server is read-only
  • NEAR_RPC_URLS Comma-separated https:// NEAR RPC URLs in failover order, with no user name or password (http:// only for a node on this machine). Default: the public RPCs @probarion/core lists for the network
  • NEAR_ARCHIVAL_RPC_URLS 오래된 트랜잭션 읽기를 검증하는 데 사용할 아카이브 RPC URL을 쉼표로 구분하여 지정합니다. 규칙은 NEAR_RPC_URLS와 같습니다. 기본값: FastNEAR의 아카이브 노드.
    영어 원문 보기Comma-separated archival RPC URLs that verify reads old transactions from, with the same rules as NEAR_RPC_URLS. Default: FastNEAR's archival node
  • PROBARION_LEDGER_PATH 원장 파일의 절대 경로입니다. 상대 경로인 경우 클라이언트가 서버를 시작한 폴더를 기준으로 합니다. 기본값은 /.probarion/ /ledger.jsonl입니다
    영어 원문 보기Absolute path of the ledger file: a relative one is taken from the folder the client starts the server in. Default ~/.probarion/ /ledger.jsonl

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Probarion에 연결할 수 없어요

Probarion는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Probarion에 연결되는 앱 쓰기

  • Probarion 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PROBARION_VAULT_ID) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • Probarion 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PROBARION_VAULT_ID) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • Probarion 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PROBARION_VAULT_ID) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • Probarion 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PROBARION_VAULT_ID) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

B · 회계, 재무 및 세금에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

Probarion 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PROBARION_VAULT_ID) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server Probarion을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user probarion --env PROBARION_VAULT_ID=your-value --env PROBARION_AGENT_KEY=your-value --env PROBARION_LEDGER_KEY=your-value -- npx -y @probarion/mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PROBARION_AGENT_KEY, PROBARION_LEDGER_KEY, PROBARION_VAULT_ID에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Probarion의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Probarion에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    Probarion 사이트 열기 ↗

  3. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • PROBARION_VAULT_ID vault 계정(예: acme.vaults.probarion.testnet)입니다. .near로 끝나는 이름은 메인넷, .testnet으로 끝나는 이름은 테스트넷입니다.
      영어 원문 보기The vault account, for example acme.vaults.probarion.testnet. A name ending in .near is on mainnet, one ending in .testnet on testnet

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  4. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  5. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user probarion --env PROBARION_VAULT_ID=your-value --env PROBARION_AGENT_KEY=your-value --env PROBARION_LEDGER_KEY=your-value -- npx -y @probarion/mcp

    Enter 전에 “your-value”를 내 키로 바꾸세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  6. Claude Code에서 /mcp 입력

    Probarion이 목록에 있고 연결됨으로 보이면 돼요

  7. 해 보기

    Probarion을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Probarion을 쓰고 있다고 하거나 답에 Probarion 도구 이름이 나오면 연결된 거예요

추가 설정 5개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • NEAR_NETWORK mainnet 또는 testnet. vault ID가 .near나 .testnet으로 끝나지 않을 때만 필요하며, 설정하는 경우 vault ID의 끝부분과 일치해야 합니다.
    영어 원문 보기mainnet or testnet. Needed only when the vault id ends in neither .near nor .testnet; when set, the vault id's ending must agree with it
  • PROBARION_KEYS_FILE Absolute path of the keys file that probarion-mcp init wrote, which must exist. Default ~/.probarion/ /keys.json, used when it exists. With no keys the server is read-only
  • NEAR_RPC_URLS Comma-separated https:// NEAR RPC URLs in failover order, with no user name or password (http:// only for a node on this machine). Default: the public RPCs @probarion/core lists for the network
  • NEAR_ARCHIVAL_RPC_URLS 오래된 트랜잭션 읽기를 검증하는 데 사용할 아카이브 RPC URL을 쉼표로 구분하여 지정합니다. 규칙은 NEAR_RPC_URLS와 같습니다. 기본값: FastNEAR의 아카이브 노드.
    영어 원문 보기Comma-separated archival RPC URLs that verify reads old transactions from, with the same rules as NEAR_RPC_URLS. Default: FastNEAR's archival node
  • PROBARION_LEDGER_PATH 원장 파일의 절대 경로입니다. 상대 경로인 경우 클라이언트가 서버를 시작한 폴더를 기준으로 합니다. 기본값은 /.probarion/ /ledger.jsonl입니다
    영어 원문 보기Absolute path of the ledger file: a relative one is taken from the folder the client starts the server in. Default ~/.probarion/ /ledger.jsonl

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

Probarion 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PROBARION_VAULT_ID) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server Probarion을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "probarion": { "command": "npx", "args": [ "-y", "@probarion/mcp" ], "env": { "PROBARION_VAULT_ID": "your-value", "PROBARION_AGENT_KEY": "your-value", "PROBARION_LEDGER_KEY": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PROBARION_AGENT_KEY, PROBARION_LEDGER_KEY, PROBARION_VAULT_ID에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Probarion의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Probarion에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    Probarion 사이트 열기 ↗

  3. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • PROBARION_VAULT_ID vault 계정(예: acme.vaults.probarion.testnet)입니다. .near로 끝나는 이름은 메인넷, .testnet으로 끝나는 이름은 테스트넷입니다.
      영어 원문 보기The vault account, for example acme.vaults.probarion.testnet. A name ending in .near is on mainnet, one ending in .testnet on testnet

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  4. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  5. 키 입력

    Probarion 설정에서 PROBARION_AGENT_KEY, PROBARION_LEDGER_KEY, PROBARION_VAULT_ID가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  6. Cursor에서 AI 채팅을 Agent 모드로 열기

  7. 해 보기

    Probarion을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Probarion을 쓰고 있다고 하거나 답에 Probarion 도구 이름이 나오면 연결된 거예요

추가 설정 5개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • NEAR_NETWORK mainnet 또는 testnet. vault ID가 .near나 .testnet으로 끝나지 않을 때만 필요하며, 설정하는 경우 vault ID의 끝부분과 일치해야 합니다.
    영어 원문 보기mainnet or testnet. Needed only when the vault id ends in neither .near nor .testnet; when set, the vault id's ending must agree with it
  • PROBARION_KEYS_FILE Absolute path of the keys file that probarion-mcp init wrote, which must exist. Default ~/.probarion/ /keys.json, used when it exists. With no keys the server is read-only
  • NEAR_RPC_URLS Comma-separated https:// NEAR RPC URLs in failover order, with no user name or password (http:// only for a node on this machine). Default: the public RPCs @probarion/core lists for the network
  • NEAR_ARCHIVAL_RPC_URLS 오래된 트랜잭션 읽기를 검증하는 데 사용할 아카이브 RPC URL을 쉼표로 구분하여 지정합니다. 규칙은 NEAR_RPC_URLS와 같습니다. 기본값: FastNEAR의 아카이브 노드.
    영어 원문 보기Comma-separated archival RPC URLs that verify reads old transactions from, with the same rules as NEAR_RPC_URLS. Default: FastNEAR's archival node
  • PROBARION_LEDGER_PATH 원장 파일의 절대 경로입니다. 상대 경로인 경우 클라이언트가 서버를 시작한 폴더를 기준으로 합니다. 기본값은 /.probarion/ /ledger.jsonl입니다
    영어 원문 보기Absolute path of the ledger file: a relative one is taken from the folder the client starts the server in. Default ~/.probarion/ /ledger.jsonl

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

Probarion 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (PROBARION_VAULT_ID) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server Probarion을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "probarion": { "type": "stdio", "command": "npx", "args": [ "-y", "@probarion/mcp" ], "env": { "PROBARION_VAULT_ID": "your-value", "PROBARION_AGENT_KEY": "your-value", "PROBARION_LEDGER_KEY": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PROBARION_AGENT_KEY, PROBARION_LEDGER_KEY, PROBARION_VAULT_ID에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Probarion의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Probarion에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    Probarion 사이트 열기 ↗

  3. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • PROBARION_VAULT_ID vault 계정(예: acme.vaults.probarion.testnet)입니다. .near로 끝나는 이름은 메인넷, .testnet으로 끝나는 이름은 테스트넷입니다.
      영어 원문 보기The vault account, for example acme.vaults.probarion.testnet. A name ending in .near is on mainnet, one ending in .testnet on testnet

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  4. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  5. 키 입력

    Probarion 설정에서 PROBARION_AGENT_KEY, PROBARION_LEDGER_KEY, PROBARION_VAULT_ID가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  6. VS Code에서 AI 채팅을 Agent 모드로 열기

  7. 해 보기

    Probarion을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Probarion을 쓰고 있다고 하거나 답에 Probarion 도구 이름이 나오면 연결된 거예요

추가 설정 5개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • NEAR_NETWORK mainnet 또는 testnet. vault ID가 .near나 .testnet으로 끝나지 않을 때만 필요하며, 설정하는 경우 vault ID의 끝부분과 일치해야 합니다.
    영어 원문 보기mainnet or testnet. Needed only when the vault id ends in neither .near nor .testnet; when set, the vault id's ending must agree with it
  • PROBARION_KEYS_FILE Absolute path of the keys file that probarion-mcp init wrote, which must exist. Default ~/.probarion/ /keys.json, used when it exists. With no keys the server is read-only
  • NEAR_RPC_URLS Comma-separated https:// NEAR RPC URLs in failover order, with no user name or password (http:// only for a node on this machine). Default: the public RPCs @probarion/core lists for the network
  • NEAR_ARCHIVAL_RPC_URLS 오래된 트랜잭션 읽기를 검증하는 데 사용할 아카이브 RPC URL을 쉼표로 구분하여 지정합니다. 규칙은 NEAR_RPC_URLS와 같습니다. 기본값: FastNEAR의 아카이브 노드.
    영어 원문 보기Comma-separated archival RPC URLs that verify reads old transactions from, with the same rules as NEAR_RPC_URLS. Default: FastNEAR's archival node
  • PROBARION_LEDGER_PATH 원장 파일의 절대 경로입니다. 상대 경로인 경우 클라이언트가 서버를 시작한 폴더를 기준으로 합니다. 기본값은 /.probarion/ /ledger.jsonl입니다
    영어 원문 보기Absolute path of the ledger file: a relative one is taken from the folder the client starts the server in. Default ~/.probarion/ /ledger.jsonl

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Probarion을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user probarion --env PROBARION_VAULT_ID=your-value --env PROBARION_AGENT_KEY=your-value --env PROBARION_LEDGER_KEY=your-value -- npx -y @probarion/mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "probarion": {
      "command": "npx",
      "args": [
        "-y",
        "@probarion/mcp"
      ],
      "env": {
        "PROBARION_VAULT_ID": "your-value",
        "PROBARION_AGENT_KEY": "your-value",
        "PROBARION_LEDGER_KEY": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "probarion": {
      "command": "npx",
      "args": [
        "-y",
        "@probarion/mcp"
      ],
      "env": {
        "PROBARION_VAULT_ID": "your-value",
        "PROBARION_AGENT_KEY": "your-value",
        "PROBARION_LEDGER_KEY": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "probarion": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "@probarion/mcp"
      ],
      "env": {
        "PROBARION_VAULT_ID": "your-value",
        "PROBARION_AGENT_KEY": "your-value",
        "PROBARION_LEDGER_KEY": "your-value"
      }
    }
  }
}

직접 입력할 값

  • PROBARION_VAULT_ID 필수 env
    vault 계정(예: acme.vaults.probarion.testnet)입니다. .near로 끝나는 이름은 메인넷, .testnet으로 끝나는 이름은 테스트넷입니다.
    영어 원문 보기The vault account, for example acme.vaults.probarion.testnet. A name ending in .near is on mainnet, one ending in .testnet on testnet
  • NEAR_NETWORK env
    mainnet 또는 testnet. vault ID가 .near나 .testnet으로 끝나지 않을 때만 필요하며, 설정하는 경우 vault ID의 끝부분과 일치해야 합니다.
    영어 원문 보기mainnet or testnet. Needed only when the vault id ends in neither .near nor .testnet; when set, the vault id's ending must agree with it
  • PROBARION_KEYS_FILE env
    Absolute path of the keys file that probarion-mcp init wrote, which must exist. Default ~/.probarion/ /keys.json, used when it exists. With no keys the server is read-only
  • PROBARION_AGENT_KEY 비밀 필수 env
    에이전트 키의 비밀 값(ed25519:...). 금고의 키로, spend만 호출할 수 있습니다. 키 파일 대신 사용합니다. PROBARION_LEDGER_KEY로 설정하거나, 둘 다 설정하지 않습니다
    영어 원문 보기The agent key's secret (ed25519:...), the vault's key that can only call spend, in place of a keys file. Set it with PROBARION_LEDGER_KEY, or neither
  • PROBARION_LEDGER_KEY 비밀 필수 env
    ledger 키의 비밀 값(ed25519:...)으로, anchor만 호출할 수 있는 vault의 키이며 키 파일 대신 사용합니다. PROBARION_AGENT_KEY로 설정하거나, 둘 다 설정하지 않습니다
    영어 원문 보기The ledger key's secret (ed25519:...), the vault's key that can only call anchor, in place of a keys file. Set it with PROBARION_AGENT_KEY, or neither
  • NEAR_RPC_URLS env
    Comma-separated https:// NEAR RPC URLs in failover order, with no user name or password (http:// only for a node on this machine). Default: the public RPCs @probarion/core lists for the network
  • NEAR_ARCHIVAL_RPC_URLS env
    오래된 트랜잭션 읽기를 검증하는 데 사용할 아카이브 RPC URL을 쉼표로 구분하여 지정합니다. 규칙은 NEAR_RPC_URLS와 같습니다. 기본값: FastNEAR의 아카이브 노드.
    영어 원문 보기Comma-separated archival RPC URLs that verify reads old transactions from, with the same rules as NEAR_RPC_URLS. Default: FastNEAR's archival node
  • PROBARION_LEDGER_PATH env
    원장 파일의 절대 경로입니다. 상대 경로인 경우 클라이언트가 서버를 시작한 폴더를 기준으로 합니다. 기본값은 /.probarion/ /ledger.jsonl입니다
    영어 원문 보기Absolute path of the ledger file: a relative one is taken from the folder the client starts the server in. Default ~/.probarion/ /ledger.jsonl

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

GitHub 스타i
1 (저장소 전체의 별)
이 저장소에는 MCP 항목이 여러 개 있어 별은 순위에서 한 번만 세요
주간 다운로드i
npm/PyPI에 없음
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.1.2
레지스트리 공개i
2026년 11월 15일
코드 마지막 변경i
2026년 11월 17일
제작자
probarion
패키지
npm: @probarion/mcp
웹사이트
probarion.xyz
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 probarion 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 3일 전

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 @probarion/mcp@0.1.2 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/probarion.svg)](https://mcp.popnx.com/en/servers/probarion)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

회계, 재무 및 세금 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 3496개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 3496개 중 83%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 3496개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Probarion, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: PROBARION_AGENT_KEY, PROBARION_LEDGER_KEY

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 3일 전 변경됐고, 최신 버전(0.1.2)은 5일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: SolidInvoice, Journalit, Beancount.io, Tapetide - Indian Stock Market MCP, Twelve Data

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

SolidInvoice

Create and send invoices and quotes, manage clients, and track payments in SolidInvoice.

제작자: SolidInvoice성장 중★ 99011일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · solidinvoice.co

Journalit

Trading journal in Obsidian. Ask Claude or ChatGPT about your trades; edits are previewed first.

제작자: Cursivez성장 중★ 26512일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · journalit.co

Beancount.io

Query, edit, and reconcile a hosted Beancount ledger: BQL, reports, files, and bank imports.

제작자: bex-co성장 중★ 707 저장소 전체의 별지난달 업데이트

클라우드에서 실행✓ 서비스 회사 · beancount.io

Twelve Data

Real-time and historical market data: stocks, forex, crypto, ETFs, fundamentals and 60+ indicators.

제작자: twelvedata성장 중★ 8716일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · twelvedata.com
비슷한 항목과 비교
이 항목
Probarion
SolidInvoiceJournalitBeancount.ioTapetide - Indian Stock Market MCPTwelve Data
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드 또는 컴퓨터 설치 모두 가능클라우드에서 동작, 설치 불필요
키 필요예아니요아니요아니요예아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요예
기본 점검3/34/64/44/45/54/4
라이선스MITMITNOASSERTIONMITMIT–
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

@probarion/mcp

An MCP server that gives an AI agent a Probarion vault to pay from. The agent can see its mandates, dry-run a payment, pay under a mandate and read a payment's status. It can pay only the payee of a mandate the owner signed for its key: no tool takes an address, and the vault contract pays the mandate's payee.

Unaudited beta. Testnet first; use small amounts. MIT licensed.

On npm since release 0.1.1, published on 2026-11-11. npx -y @probarion/mcp@0.1.2 runs it with no clone, and the official MCP registry lists it as io.github.probarion/probarion. A clone of the repository builds the same server, as Set it up below shows, and the lines below give both forms: from npm and from a clone.

The five tools

ToolWhat it doesSends a transaction
list_mandatesThe vault's mandates: payee, cap per payment, total cap and what is left, uses left, approval threshold, expiry and the agent key each is bound to, beside this server's ownNo
check_spendAsks the vault contract (check_spend, a free view) whether it would pay this amount under this mandateNo
request_spendPays under a mandate: Probarion's rules (decide() in @probarion/core) decide, the contract's spend checks again and pays the mandate's payee, and the decision goes into the vault's signed ledger. A second request with the same ref pays nothing: it is refused, and names the vault's spend under that ref as earlier_spendYes, spend with the agent key
get_spend_statusReads a spend by id: held, pending, paid, burned, failed, rejected or expired. burned is final for the vault: Probarion does not watch the release on the other chain yet (on testnet nothing leaves NEAR), so do not poll a burned spend or send it againNo
verifyRuns Probarion's verifier on the vault and the ledger file at PROBARION_LEDGER_PATH: ledger signatures, hash links, anchors, a decision behind every spend, keys, codeNo

Amounts go in as USDC decimal strings ("0.01", "25.50"). Every input rejects fields it does not know, so a prompt-injected "to": "0xBAD" is refused before anything runs. No tool creates, changes or removes a mandate, a key or the vault's settings: those are the owner's, signed in the owner's wallet.

When a client connects, the server also gives it instructions for the model (the MCP instructions field; each client decides whether its model sees them), under 1,200 characters. Where a tool description or an answer's note already states a rule, the instructions use the same sentence, and a few words of their own orient the model: only the payee of an active mandate bound to this server's key can be paid; check_spend first when unsure, since it sends no transaction; each ref and each invoice hash pays at most once; a held spend is polled with get_spend_status until it leaves held or its held_until passes (the contract approves no hold after that), not sent again; an unconfirmed spend may have paid, so it is not sent again under a new ref; a refusal is final for that request; and burned is final for the vault, in the words for the server's network. A server with no keys adds that request_spend is off.

What the agent's keys can do

The server holds two function-call keys of the vault and no owner key:

  • The agent key can call spend and nothing else, with no deposit.
  • The ledger key can call anchor and nothing else. It also signs each ledger entry.

Both stay on the machine that runs the server, in a keys file that probarion-mcp init writes. With no keys the server runs read-only: request_spend is off, the other four tools work. verify then needs PROBARION_LEDGER_PATH set to a copy of the vault's ledger; on an empty ledger, the checks that read it fail, and the answer says so.

Set it up

Node 24 or newer. Run it from npm with npx -y @probarion/mcp@0.1.2, or build it from a clone of the repository:

git clone https://github.com/probarion/probarion.git

cd probarion pnpm install --frozen-lockfile pnpm --filter "@probarion/mcp..." run build

The last line builds the server and the two packages it needs, @probarion/core and @probarion/sdk. The server is then node packages/mcp/dist/bin.js in that folder; the steps below write probarion-mcp for it. From npm, npx -y @probarion/mcp@0.1.2 runs the same commands with no clone. init and status print their own commands the way you started them, so from a clone the commands they print begin with node and the full path of bin.js.

Testnet first. Mainnet works the same way: the vault's name says its network (.near is mainnet, .testnet is testnet). The console does not serve mainnet yet, so on mainnet init and status give the probarion CLI's owner transactions and no console link.

1. Make the keys on your machine
node packages/mcp/dist/bin.js init --vault acme.vaults.probarion.testnet

init makes the agent key and the ledger key and writes both to ~/.probarion/ /keys.json, a file only you can read (mode 0600; on Windows the file gets its folder's permissions, and init warns about that, and about a file inside a git repository). It prints only the two public keys, the file's path and the next steps. Run it again and it changes nothing: it checks the file and prints the same public keys. --keys-file puts the file somewhere else.

Back up that folder: ledger.jsonl there is the only copy of the agent's signed record once the server writes it. The folder also holds keys.json, so the backup holds the two secret keys: keep it as private as the file itself, and out of any shared or synced folder in the clear. A backup restored from a zip or a cloud folder may come back readable by others; status fails a keys file that other users can read (outside Windows) and names the chmod 600 that fixes it. The ledger file is the part that cannot be made again: new keys can, and the owner then adds them.

Mode 0600 keeps out other users, not your own programs. An agent host that runs shell commands as you can read keys.json, and with both keys it can sign its own allowing decisions and spends without the server's decide(). The money still goes only to a mandate's payee, within its caps, but the ledger then records decisions the code did not make, and verify cannot tell. When the agent host has a shell tool, run the server as another OS user, or in a container the agent cannot read. The same holds for keys given in PROBARION_AGENT_KEY and PROBARION_LEDGER_KEY: keep them out of a client config the agent can read.

2. The owner adds the two public keys to the vault

The vault's owner signs two transactions, add_agent and set_ledger_key, which the CLI printers of the probarion CLI print:

probarion agent add --vault acme.vaults.probarion.testnet --pk <agent public key>

probarion ledger set-key --vault acme.vaults.probarion.testnet --pk

Each command prints the transaction for the owner's wallet to sign; init prints both with the keys filled in. On testnet the owner can paste the two public keys on the console's Agent (MCP) tab instead (https://probarion.xyz/console/ /agent), which init and status link to; the console does not serve mainnet yet. The owner also signs a mandate for the agent key (the console's Mandates tab, or probarion mandate create) and puts USDC in the vault.

3. Check that the vault is ready
PROBARION_VAULT_ID=acme.vaults.probarion.testnet node packages/mcp/dist/bin.js status

In PowerShell, set the variable first: $env:PROBARION_VAULT_ID = "acme.vaults.probarion.testnet". status reads the same settings as the server and prints one line per check, each ok, not yet or fail: the keys were found, in a keys file only you can read; the agent key is one of the vault's agent keys, a function-call key limited to spend with allowance left; the vault's ledger key is this ledger key, limited to anchor; the vault is not frozen; an active mandate is bound to the agent key; the vault's USDC; and the local ledger file against the vault's latest anchor (the server's single-writer check, run dry: the anchored entries are this file's, and this server's ledger key signed every entry after them). When the vault is not ready it ends with one next step: the first fail that has one, else the first not yet. It only reads: nothing is signed or sent. Exit code 0 when ready, 1 when not, 2 for a configuration error.

4. Give the MCP client the vault id

The client's config carries only PROBARION_VAULT_ID, and PROBARION_KEYS_FILE when the keys file is not in its default place. The server finds the keys in the keys file. The client lines are below.

Settings

The server and status read these from their environment:

VariableRequiredMeaning
PROBARION_VAULT_IDYesThe vault account, e.g. acme.vaults.probarion.testnet
NEAR_NETWORKWhen the vault's name ends in neither .near nor .testnetmainnet or testnet
PROBARION_KEYS_FILENoThe keys file init --keys-file wrote, as an absolute path. It must exist. Default ~/.probarion/ /keys.json, used when it exists
PROBARION_AGENT_KEYWith PROBARION_LEDGER_KEY, or neithered25519:..., the vault's spend-only key, in place of a keys file (see the fallback below)
PROBARION_LEDGER_KEYWith PROBARION_AGENT_KEY, or neithered25519:..., the vault's anchor-only key, in place of a keys file
NEAR_RPC_URLSNoComma-separated https:// RPC URLs in failover order, with no user name or password in a URL (http:// only for a node on this machine)
NEAR_ARCHIVAL_RPC_URLSNoThe archival RPC URLs verify reads old transactions from, with the same rules
PROBARION_LEDGER_PATHNoThe ledger file, as an absolute path: a relative one is taken from the folder the MCP client starts the server in. Default ~/.probarion/ /ledger.jsonl

The keys come from the first of these that is set: both PROBARION_AGENT_KEY and PROBARION_LEDGER_KEY; the file PROBARION_KEYS_FILE names; ~/.probarion/ /keys.json. With none, the server is read-only. One key from the environment and the other from a file is refused. A keys file must be for this vault and its network, and each secret key in it must match the public key beside it; a problem is named by the file and the field, with no value from the file. The server's first line on stderr says where its keys came from, and no key.

node packages/mcp/dist/bin.js --help lists the commands and --version prints the version. With no argument, the binary is the MCP server and writes only JSON-RPC to stdout.

Try it: the read-only demo

One command, with no key and no wallet, run in the clone's folder once it is built:

node packages/mcp/dist/bin.js demo

From npm, with no clone: npx -y @probarion/mcp@0.1.2 demo.

The demo starts the MCP server over stdio with no key in its environment, against the public testnet vault demo.vaults.probarion.testnet (--vault picks another testnet vault). Each step prints what it expects and what came back:

  1. tools/list: the five tools, and that no input field names a recipient.
  2. list_mandates: the mandate's payee, caps, uses and expiry, read live from the vault contract.
  3. check_spend, the contract's free dry run, at three amounts taken from those caps: one it pays, one it holds for an approver, and one over the per-payment cap that it refuses with OverPerPayment.
  4. request_spend with an injected "to" field, refused by the input schema before the tool runs.
  5. get_spend_status on a paid spend.
  6. verify on the vault's signed ledger, downloaded from its public proof page. When the d

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요