NEMO x402 Micro-Services
34 paid tools: site/SEO, weather, crypto+markets, podcasts, YouTube, Polymarket. x402/MPP/Stripe.
제작자가 쓴 설명(영어 원문)
Sweep bonded completeness claims on Creditcoin against Ethereum, and refute one that omits an event.
이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.
이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
PRIVATE_KEY비밀로 표시된 값은 내 계정의 열쇠예요. 절대 다른 사람과 공유하거나 채팅에 붙여 넣지 마세요.
필요한 것
어떤 앱을 쓰세요?
위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.
Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요
{
"mcpServers": {
"utuh": {
"command": "npx",
"args": [
"-y",
"utuh-mcp"
],
"env": {
"PRIVATE_KEY": "your-value"
}
}
}
}터미널에서 이 명령어를 실행하세요
claude mcp add utuh --env PRIVATE_KEY=your-value -- npx -y utuh-mcp실행하기 전에 빈 값을 채워 주세요.
프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요
{
"mcpServers": {
"utuh": {
"command": "npx",
"args": [
"-y",
"utuh-mcp"
],
"env": {
"PRIVATE_KEY": "your-value"
}
}
}
}브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.
프로젝트의 .vscode/mcp.json에 붙여 넣으세요
{
"servers": {
"utuh": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"utuh-mcp"
],
"env": {
"PRIVATE_KEY": "your-value"
}
}
}
}브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.
이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.
선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검
레지스트리 이름이 GitHub 계정 PugarHuda 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
아직 GitHub에서 이 저장소를 읽어 오지 않았어요
아직 GitHub에서 이 저장소를 읽어 오지 않았어요
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
입력해야 할 값: PRIVATE_KEY
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.4.0)은 2개월 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.
같은 카테고리에는: NEMO x402 Micro-Services, Crypto Derivatives Data: Perp Funding Rates, Open Interest, Basis, IV, Agent Data Tools: Prices and DeFi
같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.
카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
34 paid tools: site/SEO, weather, crypto+markets, podcasts, YouTube, Polymarket. x402/MPP/Stripe.
Perp funding rates, open interest, futures basis, IV, liquidations, order books on 8 exchanges
50 tools: token prices, wallet and contract risk, liquidity pools, FX. 25 free calls.
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
Utuh bonds the claim that a set of events is complete, pays half the bond to anyone who proves one event was left out, and lends CTC undercollateralized against the claims that survive.
_utuh_ — Indonesian: whole, intact, with nothing missing. A completeness layer for the Attestcoin Protocol, built for BUIDL CTC 2026 Fall and deployed on Creditcoin CC3 Testnet.
| The landing page, claim 5 as a working paper | The console, claim 20 opened verdict first |
| Dark scheme | A sweep of claim 5 from the browser, with its provenance |
npm run judge — no key. It re-measures every number this repository and the submission quote against the live chain and exits non-zero on any that no longer holds. On 2026-09-14, after the production deploy, it printed 25 of 25, two of them checks that read the example gate below.npx -y utuh-mcp — 0.4.0 on npm and in the official MCP Registry. For clients that cannot run a command, the same server answers at https://utuh.vercel.app/api/mcp (below).TransactionVerified events on CC3's own indexer.web/whitepaper.html · Deck: web/deck.pdfWhat is on-chain, all verified on Blockscout and Sourcify (every address and read):
| On CC3 Testnet (chain 102031) | Address | What it holds |
|---|---|---|
UtuhRegistry, Ethereum-mainnet-sourced | 0x8FA0…5Fac | 72 claims over real Ethereum mainnet history; 32 refuted, claim 20 among them |
UtuhRegistry, Sepolia-sourced | 0x2688…347b | 13 claims, the completed borrow-and-repay loop; claims 3 and 5 refuted |
UtuhCredit, Sepolia-sourced | 0x0177…24b6 | lines 1–3 opened, drawn, repaid on Sepolia and settled; lines 2 and 3 entirely from the console |
SettlementLedger, on Sepolia | 0xC8C9…575B | the source-chain repayments those lines settled on |
| Creditcoin's own oracle record | transaction-verifications | 248 TransactionVerified rows are Utuh's: 212 claim members, 34 refutations, the rest control bindings |
A contract that is not Utuh reads it: NeverLiquidatedGate at 0xcA62…5D09 granted an allowance on claim 72 and refused refuted claim 20. This project wrote and deployed it as the worked example, so it is not an outside user.
The short version · The problem · What this uses of Creditcoin's · Next to Creditcoin's own example · What Utuh does · Built on Ethereum mainnet · UtuhCredit · Deployed on CC3 Testnet · Two demonstrations · The watcher as an MCP server · The console · Layout · Running it · On testing · What the tools say · Before you build on this · Attestcoin surface used · Known limits · License
Elsewhere: [docs/INTEGRATING.md](docs/INTEGRATING.md) (use the registry from your own contract) · [docs/COMPLETENESS.md](docs/COMPLETENESS.md) (does what you built have this gap?) · [docs/ROADMAP.md](docs/ROADMAP.md) (what is gated on whom) · docs/AUDIT.md · docs/MAINNET.md · SECURITY.md · 한국어 요약: [docs/README.ko.md](docs/README.ko.md)
Any registry on this protocol can tell you what it holds. Ask one whether a borrower has ever been liquidated and it can only answer with what someone chose to submit — and the borrower will not be submitting that. Utuh bonds the claim that a set is all of them, and pays half the bond to anyone who proves one event was left out.
The landing page reads both registries from Creditcoin as it draws — the two refuted claims with their block-range strips, the tally (proven, sealed, broken, burned), the deployed addresses — and each deep link above opens the console on the claim with its verdict first. The console reads the chain from your own browser, lets anyone sweep Ethereum and break an incomplete claim, and lets a borrower be underwritten end to end without cloning anything. npm run web serves both locally. Every verification behind the two refuted claims is on Creditcoin's own oracle dashboard, which nobody here can write to.
Two things a reader with a clone and no key can check first. npm run judge re-measures every number this repository and the submission quote — the contracts and their verification, the tally, both linked claims, the explorer counters, npm, the MCP Registry, the published build, the sixteen protocol entry points, the test and commit counts — and exits non-zero on any that no longer holds. And a bond here stands behind a specific line, not behind nothing: UtuhCredit.openLine reaches a claim only through UtuhRegistry.isUsable(claimId, exposure), the finalized claim is spent by the line it opens, underwrittenThrough consumes the history range, and the limit is capped at ten times the enforceable loss. Exposure is gated by the bond and consumed by the draw.
The Attestcoin Protocol proves that a source-chain transaction _happened_. A Merkle proof places the transaction in a block; a continuity proof anchors that block to an attestation stored on Creditcoin. The Block Prover precompile at 0x0FD2 checks both natively, synchronously, inside a single Creditcoin block.
What it cannot prove is that a _set_ of events is complete.
Whoever submits proofs chooses which proofs to submit. Every one of them verifies. Nothing in the protocol notices the ones that were left out.
For credit, that gap is fatal. The sentence every on-chain credit system needs is:
_This borrower has never been liquidated._
That is a statement about events which do not exist, and an inclusion proof can only ever speak about events which do. A borrower assembles their own history, submits the flattering half, and each proof checks out.
This is not hypothetical. Season 1 of this hackathon drew 76 submissions, and more than twenty of them were some form of on-chain credit score or reputation-based lending; one of those, CreditX, took a prize. Every one of them inherits this hole, the winner included — placing well is not the same as closing it, and an inclusion proof gives none of them a way to.
npm run doctor (no key needed; given one it also reports the balance) ends by making a live request to every Creditcoin-owned surface this depends on, so the list below is checkable rather than asserted. A run on 2026-09-10:
Creditcoin ecosystem surfaces
ok USC Oracle dashboard 200 — every verifyAndEmit here is listed by source height ok testnet indexer 68,160 attestations of Ethereum, chain key 3 ok mainnet indexer 52,463 attestations of Ethereum, chain key 1 ok Creditcoin Mainnet RPC chain id 102030 ok Blockscout · registry UtuhRegistry verified ok Sourcify · registry chain 102031: match match, creation match ok Blockscout · credit UtuhCredit verified ok Sourcify · credit chain 102031: match match, creation match
On top of the protocol itself — both precompiles, both verifyAndEmit overloads, EvmV1Decoder, @gluwa/usc-contracts and @gluwa/usc-sdk, the hosted Proof Builder under both of its hostnames, and RawProofBuilder as the path that needs no hosted service at all.
The pins are deliberate. Gluwa published @gluwa/asc-contracts 0.2.1 on 2026-08-31 under the new ASC name, and the reference examples import from it; this tree stays on @gluwa/usc-contracts 0.1.2 and @gluwa/usc-sdk 0.18.0 (there is no newer SDK and no asc-sdk). 0.1.2's EvmV1Decoder functions are public, which is why the decoder links as a deployed library at 0x5cab…df3F; 0.2.1 made them internal and dropped the type-specific decoders Utuh never calls. The four it does call keep identical signatures in 0.2.1, and changing the pin changes bytecode and breaks the Blockscout and Sourcify match of the live deployment, so the rename lands on the merkle-claims branch, which redeploys anyway.
Two of those lines are worth reading twice. Every append and every refutation goes through verifyAndEmit rather than its view twin, so Creditcoin's own oracle dashboard is the record — the network logged this project's work, not the other way round. And the Creditcoin Mainnet indexer is read even though nothing here is deployed there: the console audits mainnet's attestors against Ethereum itself, because auditing only the network you deployed to leaves the produ
앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요