프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요 로그인

Canvas LMS (read-only)

제작자: rbrtlol버전 2.2.1i★ 0i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.rbrtlol/canvas-readonly-mcp

설치 방법

할 수 있는 일

Read-only Canvas LMS for students: what changed in your courses, search across slides and PDFs.

제작자가 쓴 원문

  • 연결 방식 내 컴퓨터에서 실행
  • 계정 또는 키 CANVAS_TOKEN 필요 · 설정 1개 입력 필요(CANVAS_BASE_URL)
  • 분류 게임, 스포츠, 음식 및 학습

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수12/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

Canvas LMS (read-only) 설치해 줘. https://mcp.popnx.com/i/rbrtlol-canvas-readonly-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

Canvas LMS (read-only) 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (CANVAS_BASE_URL) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

  1. 제작자 설치 파일 내려받기

    제작자의 .mcpb 파일 다운로드

    .mcpb 파일은 제작자에게서 바로 온 것으로, 우리는 바꾸지 않았어요

  2. 파일을 두 번 클릭한 뒤 컴퓨터용 Claude 앱에서 Install 누르기

  3. 해 보기

    Canvas LMS (read-only)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Canvas LMS (read-only)을 쓰고 있다고 하거나 답에 Canvas LMS (read-only) 도구 이름이 나오면 연결된 거예요

추가 설정 1개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • CANVAS_HOST_ALIASES 같은 Canvas의 다른 호스트 이름, 쉼표로 구분(선택 사항)
    영어 원문 보기Other hostnames of the same Canvas, comma-separated (optional)

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Canvas LMS (read-only)에 연결할 수 없어요

Canvas LMS (read-only)는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Canvas LMS (read-only)에 연결되는 앱 쓰기

  • Canvas LMS (read-only) 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (CANVAS_BASE_URL) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • Canvas LMS (read-only) 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (CANVAS_BASE_URL) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • Canvas LMS (read-only) 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (CANVAS_BASE_URL) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
  • Canvas LMS (read-only) 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (CANVAS_BASE_URL) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

B · 게임, 스포츠, 음식 및 학습에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

Canvas LMS (read-only) 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (CANVAS_BASE_URL) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server Canvas LMS (read-only)을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user canvas-readonly --env CANVAS_BASE_URL=your-value --env CANVAS_TOKEN=your-value -- npx -y canvas-readonly-mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) CANVAS_TOKEN, CANVAS_BASE_URL에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Canvas LMS (read-only)의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Canvas LMS (read-only)에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    Canvas LMS (read-only) 사이트 열기 ↗

  3. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • CANVAS_BASE_URL Canvas 주소 (예: https://canvas.yourschool.edu)
      영어 원문 보기Your Canvas address, e.g. https://canvas.yourschool.edu

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  4. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  5. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user canvas-readonly --env CANVAS_BASE_URL=your-value --env CANVAS_TOKEN=your-value -- npx -y canvas-readonly-mcp

    Enter 전에 “your-value”를 내 키로 바꾸세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  6. Claude Code에서 /mcp 입력

    Canvas LMS (read-only)이 목록에 있고 연결됨으로 보이면 돼요

  7. 해 보기

    Canvas LMS (read-only)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Canvas LMS (read-only)을 쓰고 있다고 하거나 답에 Canvas LMS (read-only) 도구 이름이 나오면 연결된 거예요

추가 설정 1개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • CANVAS_HOST_ALIASES 같은 Canvas의 다른 호스트 이름, 쉼표로 구분(선택 사항)
    영어 원문 보기Other hostnames of the same Canvas, comma-separated (optional)

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

Canvas LMS (read-only) 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (CANVAS_BASE_URL) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server Canvas LMS (read-only)을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "canvas-readonly": { "command": "npx", "args": [ "-y", "canvas-readonly-mcp" ], "env": { "CANVAS_BASE_URL": "your-value", "CANVAS_TOKEN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) CANVAS_TOKEN, CANVAS_BASE_URL에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Canvas LMS (read-only)의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Canvas LMS (read-only)에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    Canvas LMS (read-only) 사이트 열기 ↗

  3. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • CANVAS_BASE_URL Canvas 주소 (예: https://canvas.yourschool.edu)
      영어 원문 보기Your Canvas address, e.g. https://canvas.yourschool.edu

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  4. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  5. 키 입력

    Canvas LMS (read-only) 설정에서 CANVAS_TOKEN, CANVAS_BASE_URL가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  6. Cursor에서 AI 채팅을 Agent 모드로 열기

  7. 해 보기

    Canvas LMS (read-only)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Canvas LMS (read-only)을 쓰고 있다고 하거나 답에 Canvas LMS (read-only) 도구 이름이 나오면 연결된 거예요

추가 설정 1개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • CANVAS_HOST_ALIASES 같은 Canvas의 다른 호스트 이름, 쉼표로 구분(선택 사항)
    영어 원문 보기Other hostnames of the same Canvas, comma-separated (optional)

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

Canvas LMS (read-only) 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (CANVAS_BASE_URL) · 먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server Canvas LMS (read-only)을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "canvas-readonly": { "type": "stdio", "command": "npx", "args": [ "-y", "canvas-readonly-mcp" ], "env": { "CANVAS_BASE_URL": "your-value", "CANVAS_TOKEN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) CANVAS_TOKEN, CANVAS_BASE_URL에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Canvas LMS (read-only)의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Node.js 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    node -v
    • 버전 번호(예: v26.13.1)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다

    Node.js 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v

    한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다

  2. Canvas LMS (read-only)에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    Canvas LMS (read-only) 사이트 열기 ↗

  3. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • CANVAS_BASE_URL Canvas 주소 (예: https://canvas.yourschool.edu)
      영어 원문 보기Your Canvas address, e.g. https://canvas.yourschool.edu

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  4. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  5. 키 입력

    Canvas LMS (read-only) 설정에서 CANVAS_TOKEN, CANVAS_BASE_URL가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  6. VS Code에서 AI 채팅을 Agent 모드로 열기

  7. 해 보기

    Canvas LMS (read-only)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Canvas LMS (read-only)을 쓰고 있다고 하거나 답에 Canvas LMS (read-only) 도구 이름이 나오면 연결된 거예요

추가 설정 1개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • CANVAS_HOST_ALIASES 같은 Canvas의 다른 호스트 이름, 쉼표로 구분(선택 사항)
    영어 원문 보기Other hostnames of the same Canvas, comma-separated (optional)

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Canvas LMS (read-only)을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user canvas-readonly --env CANVAS_BASE_URL=your-value --env CANVAS_TOKEN=your-value -- npx -y canvas-readonly-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "canvas-readonly": {
      "command": "npx",
      "args": [
        "-y",
        "canvas-readonly-mcp"
      ],
      "env": {
        "CANVAS_BASE_URL": "your-value",
        "CANVAS_TOKEN": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "canvas-readonly": {
      "command": "npx",
      "args": [
        "-y",
        "canvas-readonly-mcp"
      ],
      "env": {
        "CANVAS_BASE_URL": "your-value",
        "CANVAS_TOKEN": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "canvas-readonly": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "canvas-readonly-mcp"
      ],
      "env": {
        "CANVAS_BASE_URL": "your-value",
        "CANVAS_TOKEN": "your-value"
      }
    }
  }
}

직접 입력할 값

  • CANVAS_BASE_URL 필수 env
    Canvas 주소 (예: https://canvas.yourschool.edu)
    영어 원문 보기Your Canvas address, e.g. https://canvas.yourschool.edu
  • CANVAS_TOKEN 비밀 필수 env
    Canvas personal access token (Account → Settings → New access token)
  • CANVAS_HOST_ALIASES env
    같은 Canvas의 다른 호스트 이름, 쉼표로 구분(선택 사항)
    영어 원문 보기Other hostnames of the same Canvas, comma-separated (optional)

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
82/주
연결 방식
내 컴퓨터에서 실행
최신 버전i
2.2.1
레지스트리 공개i
2026년 11월 12일
코드 마지막 변경i
2026년 11월 13일
제작자
rbrtlol
패키지
npm: canvas-readonly-mcp
mcpb: …/canvas-readonly-mcp-2.2.1.mcpb
웹사이트
github.com
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 rbrtlol 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 7일 전

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 canvas-readonly-mcp@2.2.1 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/rbrtlol-canvas-readonly-mcp.svg)](https://mcp.popnx.com/en/servers/rbrtlol-canvas-readonly-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

게임, 스포츠, 음식 및 학습 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1683개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1683개 중 80%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1683개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Canvas LMS (read-only), 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: CANVAS_TOKEN

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 7일 전 변경됐고, 최신 버전(2.2.1)은 8일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js, MCPB도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: LearnHouse, Anime Garden, WilmAI, Lumify Sports Intelligence, Savecraft

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

LearnHouse

Build, edit and run courses, learning paths and communities in your LearnHouse academy.

제작자: learnhouse널리 사용됨★ 2.5천어제 업데이트

클라우드에서 실행✓ 서비스 회사 · learnhouse.app

WilmAI

Finland's Wilma school system for parents and students: schedule, homework, exams and messages.

제작자: aikarjal성장 중↓ 1.4천/주★ 89 저장소 전체의 별11일 전 업데이트

내 컴퓨터에서 실행✓ 서비스 회사 · wilm.ai

Savecraft

Savecraft serves real save game data and expert game knowledge to AI assistants.

제작자: joshsymonds초기★ 137개월 전 업데이트

클라우드에서 실행저장소 보관됨✓ 서비스 회사 · savecraft.gg
비슷한 항목과 비교
이 항목
Canvas LMS (read-only)
LearnHouseAnime GardenWilmAILumify Sports IntelligenceSavecraft
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요예아니요아니요아니요예아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/35/54/43/34/43/4
라이선스MITAGPL-3.0AGPL-3.0MITMITApache-2.0
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

canvas-readonly-mcp

Ask Claude what changed in your courses, and search every lecture slide. A read-only MCP server for Canvas LMS, built as a study assistant rather than a full Canvas API.

  • Knows what changed: daily snapshots of your courses, so "what's new since yesterday?" is one call: new announcements, moved deadlines, new grades, edited pages, even which slides in a lecture PDF changed.
  • Searches inside your files: full-text search over pages, assignments, announcements and the text of every linked PDF, slide deck and document, with the page or slide number. It finds files linked from pages and modules even when the Files tab is hidden.
  • Read-only by design: it only ever sends GET requests to Canvas. It can't submit, post, grade or change anything, and it doesn't even mark discussions as read.
  • Your token stays with you: one-click Claude Desktop extension (token in your system keychain), local stdio, or your own server for claude.ai. Nothing goes through a third party.

Works with any Canvas instance. Made for students; TAs and teachers can use it too (for reading, e.g. "needs grading" counts).

Not affiliated with or endorsed by Instructure. "Canvas" is a trademark of Instructure, Inc.

What you can ask

  • "What changed in my courses since yesterday?"
  • "What's due in the next two weeks, and what have I not submitted?"
  • "Summarize the lab 2 instructions" (the server finds the PDF linked from the course and returns its text)
  • "Which slides in lecture 5 changed since last week?"
  • "Where did we cover dynamic programming?" (searches pages, announcements and the text of every linked PDF and slide deck)
  • "How will lab 3 be graded, and what did I lose points on in lab 2?"

Tools

ToolWhat it's for
canvas_changes_sinceWhat changed since a time (default 26h): new/changed pages, assignments (due dates, grades), announcements, discussions, quizzes, events, files (which PDF pages changed). The daily-check tool.
canvas_searchFull-text search across your courses: pages, assignments, announcements, discussions, the syllabus, and the text of linked PDFs, slides and documents (with the page/slide number). From stored snapshots, so it's instant.
canvas_course_snapshotStored state of a course (optionally only some kinds, e.g. assignments). No Canvas calls.
canvas_snapshot_statusSnapshot health: courses and your role, last run, counts, errors, next run.
canvas_run_snapshotTake a snapshot now and return what changed.
canvas_whoamiThe Canvas user the token belongs to; checks that the connection works.
canvas_list_coursesYour courses, ids and your role in each.
canvas_whats_newCanvas's own activity stream since a time, including inbox messages. Live, but doesn't see edits, removals or file changes like canvas_changes_since does.
canvas_list_planner_itemsEverything dated in a window, with submission status.
canvas_list_assignments / canvas_get_assignmentAssignments, due dates, descriptions, rubrics; as a student also your submission, teacher comments and rubric scores. "Needs grading" counts for TAs/teachers.
canvas_list_quizzes / canvas_get_quizClassic quizzes and New Quizzes: time limit, attempts, lock window, instructions, your latest attempt.
canvas_list_announcementsAnnouncements across courses.
canvas_list_discussions / canvas_get_discussionDiscussion topics, and a whole thread with replies (without marking anything read).
canvas_get_syllabusThe syllabus page.
canvas_list_modulesModule structure with items.
canvas_list_pages / canvas_get_pageCourse pages as text, with their file links.
canvas_list_linked_filesEvery file linked from the course (front page, pages, modules, assignments, announcements). Works even when the files tab is hidden.
canvas_list_filesThe full Files area, including unlinked files (mostly for TAs/teachers); falls back to linked files when your role can't list it.
canvas_read_fileText of a PDF (per page), PPTX (per slide + notes), DOCX (per section), text/code file, or ZIP listing. Takes a file id or any Canvas file URL; supports page ranges.
canvas_list_calendar_eventsCalendar events.
canvas_get_gradesYour own scores, grades and comments (as a student).
canvas_api_getEscape hatch: any GET /api/v1/... endpoint (can be disabled).

Quick start

1. Get a Canvas access token

In Canvas: Account → Settings → + New access token. Give it a purpose ("Claude") and preferably an expiry date.

You also need your Canvas address, e.g. https://canvas.yourschool.edu or https://yourschool.instructure.com.

No "New access token" button? Your school may have turned personal tokens off.

Some institutions disable personal access tokens for students, or only allow short-lived ones. This server needs one: it doesn't support Canvas OAuth, because that requires your school's admins to register each app.

  • Button missing: ask your school's Canvas or IT support whether personal access tokens can be enabled for you. Mention that it's for a tool that only reads (it never sends anything but GET requests). Some schools say yes, many say no.
  • Token expires quickly: tools start failing with "the Canvas API token is invalid or expired". Create a new token and update it: in Claude Desktop under Settings → Extensions → Canvas LMS (read-only), or CANVAS_TOKEN in your config or .env.
  • Check your school's rules on connecting course data to AI tools before you start.
2a. Claude Desktop: one-click extension (easiest)
  1. Download canvas-readonly-mcp- .mcpb from the latest release.
  2. Open it (double-click, or drag it into Claude Desktop → Settings → Extensions) and click Install.
  3. Enter your Canvas address and access token. The token is stored in your system keychain.

Nothing else to install: Claude Desktop runs the extension with its built-in Node.js.

2b. Local: Claude Code and other stdio clients

Requires Node.js 22.13 or newer.

Claude Code:

claude mcp add canvas \

-e CANVAS_BASE_URL=https://canvas.yourschool.edu \ -e CANVAS_TOKEN=your-token \ -- npx -y canvas-readonly-mcp

Claude Desktop without the extension: add this to claude_desktop_config.json (Settings → Developer → Edit Config):

{

"mcpServers": { "canvas": { "command": "npx", "args": ["-y", "canvas-readonly-mcp"], "env": { "CANVAS_BASE_URL": "https://canvas.yourschool.edu", "CANVAS_TOKEN": "your-token" } } } }

In stdio mode, snapshots refresh shortly after the client starts the server, and in the background whenever they're older than SNAPSHOT_MAX_AGE_H (default 20h). Data is stored in your user data directory (~/Library/Application Support/canvas-readonly-mcp on macOS, ~/.local/share/canvas-readonly-mcp on Linux, %APPDATA%\canvas-readonly-mcp on Windows).

2c. Server: claude.ai custom connectors (HTTP)

claude.ai connects from the internet, so this needs a server with HTTPS.

mkdir canvas-mcp && cd canvas-mcp

curl -O https://raw.githubusercontent.com/rbrtlol/canvas-readonly-mcp/main/docker-compose.yml curl -o .env https://raw.githubusercontent.com/rbrtlol/canvas-readonly-mcp/main/.env.example

Fill in CANVAS_BASE_URL and CANVAS_TOKEN, then:

sed -i "s/^MCP_SECRET=.*/MCP_SECRET=$(openssl rand -hex 32)/" .env chmod 600 .env docker compose up -d curl -s localhost:8787/healthz # {"ok":true}

Put a reverse proxy with TLS in front of it: deploy/Caddyfile.example (automatic certificates) or deploy/nginx.conf.example. In claude.ai, add a custom connector with the URL

https://canvas-mcp.example.com/mcp/<MCP_SECRET>

and leave the OAuth fields empty. Clients that support headers can use https://…/mcp with Authorization: Bearer instead.

Without Docker: npx canvas-readonly-mcp --http --env-file .env.

Configuration

All settings are environment variables (or a file passed with --env-file).

VariableDefaultMeaning
CANVAS_BASE_URLrequiredYour Canvas address.
CANVAS_TOKENrequiredPersonal access token.
MCP_SECRETrequired for --httpAt least 32 characters; part of the connector URL.
CANVAS_HOST_ALIASESOther hostnames of the same Canvas, comma-separated (e.g. yourschool.instructure.com when you use a custom domain). Links to them are recognized.
DISPLAY_TZyour Canvas profile'sTime zone for displayed times (IANA name, e.g. Europe/Stockholm).
ENABLE_RAW_GETtrueSet false to remove canvas_api_get.
HOST / PORT127.0.0.1 / 8787HTTP listen address (0.0.0.0 in the Docker image).
DATA_DIROS user data dirWhere the database and cache live. DB_PATH / CACHE_DIR override each.
SNAPSHOT_ENABLEDtrueTurn the snapshot/change-log feature off entirely.
SNAPSHOT_COURSESOnly these course ids (overrides SNAPSHOT_SCOPE). id:label:role overrides the label and role.
SNAPSHOT_SCOPEdashboardWhich courses to snapshot: dashboard = the courses on your Canvas dashboard (your favorites, or Canvas's automatic pick if you haven't chosen any); active = every active enrollment. Courses whose end date has passed are skipped either way.
SNAPSHOT_EXCLUDECourse ids to skip.
SNAPSHOT_AT04:30Daily snapshot time in DISPLAY_TZ, or off.
SNAPSHOT_MAX_AGE_H20Refresh at startup / on demand when older than this.
SNAPSHOT_EXTRACTlinkedWhich files' text to hash for change detection: linked, all (also files only in the files index), none.
EVENT_RETENTION_DAYS120How long change events are kept.
CRAWL_MAX_PAGES / ANNOUNCEMENT_DAYS200 / 730Crawl limits per course.
MAX_FILE_MB / DOWNLOAD_TIMEOUT_S50 / 60Download limits.
EXTRACT_TIMEOUT_S / EXTRACT_MAX_PAGES60 / 500Text extraction limits.
CACHE_MAX_MB500Extracted-text cache size; least recently used entries are evicted.

How it works

Finding files. Many Canvas setups hide the files and pages lists from students. The server therefore uses those lists when your role may see them, and otherwise follows links from the front page, modules, syllabus, assignments and announcements. canvas_get_page shows file links inline as (file: ). Leftover $CANVAS_OBJECT_REFERENCE$ links from course copies are resolved where possible and otherwise marked as broken.

Reading files. canvas_read_file downloads the file (the token is only sent to Canvas itself, never to the storage host it redirects to) and extracts text in a separate worker thread with memory and time limits. Results are cached by file id and updated_at. Scanned PDFs without a text layer are reported as such (no OCR). Legacy .doc/.ppt aren't supported.

Snapshots and the change log. Once a day (and when stale), the server stores the state of each course on your Canvas dashboard in SQLite (star a course under *Courses → All courses* to add it, or set SNAPSHOT_COURSES): pages, modules, assignments (with your submission status and grade), announcements and discussions (with a teacher/TA flag), quizzes, calendar events, the syllabus, and file metadata with a per-page content hash for PDFs. Each item is normalized (HTML to text, volatile fields dropped) and hashed. Differences become change events with old → new values, short text diffs, and changed PDF page numbers. The first run is a silent baseline. Announcements with no posted_at (copied from an earlier

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요