프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Redbark

제작자: redbark-co버전 2.1.0i★ –i클라우드에서 실행
레지스트리 이름com.redbark/mcp

설치

개요

제작자가 쓴 설명(영어 원문)

Live AU/NZ bank (CDR) and brokerage data for AI agents, plus management of Redbark syncs and rules

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://mcp.redbark.com/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http redbark https://mcp.redbark.com/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "redbark": {
      "url": "https://mcp.redbark.com/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "redbark": {
      "type": "http",
      "url": "https://mcp.redbark.com/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://mcp.redbark.com/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

아직 이 서버의 도구 목록을 읽지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 redbark.com 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    엔드포인트 응답

    아직 점검하지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요

  • … 아직 점검 안 함

    OAuth로 로그인

    아직 점검하지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    아직 점검하지 않았어요. 엔드포인트를 점검할 때 도구 목록을 읽어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32509개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32509개 중 29%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32509개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Redbark, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(2.1.0)은 3개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, Fomu MCP

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

Fomu MCP

제작자: gabrielmahia

Kenya government form guides: checklists, draft letters, eCitizen, Huduma, timelines. Sample data.

내 컴퓨터에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Redbark MCP Server

Connect AI agents to your Australian and NZ bank and global brokerage data, and let them manage your Redbark syncs, destinations, rules and categories over the Model Context Protocol.

Website · Documentation · Dashboard


Redbark syncs bank and brokerage accounts to Google Sheets, Airtable, Notion, YNAB, and webhooks. The Redbark MCP server gives MCP-compatible AI agents (Claude, Cline, Cursor, ChatGPT, VS Code, and others) live access to the same financial data, plus scoped management of your Redbark account: syncs, destinations, rules, categories and event destinations. It is a thin layer over the Redbark API v2: every API operation is one tool, under the same name as the operation id.

Australian banking data is sourced through the regulated Consumer Data Right (CDR / open banking) framework. Your banking credentials are never shared with Redbark or your AI agent, and Redbark never stores your banking data. Every read is proxied live from the source.

Quickstart

The server is remote and hosted. There is nothing to install or run.

https://mcp.redbark.com/mcp
  • Transport: Streamable HTTP
  • Auth: OAuth 2.1 (automatic, your client opens a browser consent flow), or a personal API key as a fallback
  • Requirements: a Redbark account on a Developer or Professional plan (API access is included in the free trial)
Cline

Add to cline_mcp_settings.json (Cline → MCP Servers → Configure):

{

"mcpServers": { "redbark": { "type": "streamableHttp", "url": "https://mcp.redbark.com/mcp" } } }

Cline discovers the OAuth authorization server automatically and opens a browser window to approve access. To use an API key instead (created at app.redbark.com → Settings → API Keys):

{

"mcpServers": { "redbark": { "type": "streamableHttp", "url": "https://mcp.redbark.com/mcp", "headers": { "Authorization": "Bearer rbk_live_YOUR_API_KEY" } } } }

Claude Code
claude mcp add --transport http redbark https://mcp.redbark.com/mcp
Claude (desktop / web)

Settings → Connectors → Add custom connector → paste https://mcp.redbark.com/mcp.

Cursor
{

"mcpServers": { "redbark": { "url": "https://mcp.redbark.com/mcp" } } }

Tools

Every Redbark API v2 operation is a tool, named after its operation id (81 tools, 62 listed by default), plus five composite tools. Reads fetch banking data live. Writes change Redbark configuration only (syncs, destinations, rules, categories, event destinations), never your bank. The AI only gets the scopes you grant on the consent screen; tools outside those scopes refuse and say which scope to grant.

FamilyExample toolsScopeExample prompt
Accountget_menone"Which plan am I on?"
Connections, consents, institutionslist_connections, get_connection, list_consents, list_institutions, revoke_connectionmcp:read, connections:write to revoke"Which of my bank connections expire this month?"
Accounts and balanceslist_accounts, get_account, get_account_balance, get_account_detailsmcp:read"What is the balance on my offset account?"
Transactionslist_transactions, get_transactionmcp:read"List my transactions over $500 since 1 July"
Holdings and tradeslist_holdings, list_tradesmcp:read + brokerage:read"What are my largest positions?"
Syncs and runslist_syncs, create_sync, update_sync, run_sync, resync_sync, list_sync_runs, cancel_sync_runmcp:read, syncs:write"Run the Notion sync now and tell me when it finishes"
Destinationslist_destinations, create_destination, list_destination_resources, rotate_destination_secretmcp:read, destinations:write"Which tabs does my Budget spreadsheet have?"
Categorieslist_categories, create_category, set_category_sources, list_provider_categoriesmcp:read, categories:write"Make a Subscriptions category and map streaming merchants to it"
Ruleslist_rulesets, create_rule, preview_ruleset, reorder_ruleset_rules, attach_sync_rulesetmcp:read, rules:write"Preview what my cleanup ruleset would do to last month"
Eventslist_events, get_event, redeliver_event, list_event_destinations, create_event_destinationmcp:read, events:write"Show the last failed sync run event and redeliver it"
Link sessionscreate_link_session, get_link_sessionconnections:write"Give me a link to connect another bank"
API keyslist_api_keys, get_api_keynot available over OAuthKeys are created in the dashboard. API-key clients with keys:write can manage keys

Ids are the public ids from the API (acct_..., conn_..., sync_..., dest_...). Lists are paginated the same way as the API: the AI passes limit and follows the page token. The full list of tools, with every argument, is the API reference.

Composite tools

Five tools combine several API calls so common questions take one step:

ToolWhat it does
account_overviewEvery account with a live balance, grouped by connection, with consent expiry and reauthorisation flags
spending_summarySpend and income for a date range, grouped by category, merchant, account or month, with the largest transactions. Raw transactions are never returned
setup_syncChecks the destination, resolves its resources (Sheets tabs, YNAB accounts), builds the mappings and creates the sync
diagnose_syncLast runs, failure reason, related events, connection and consent state, and a recommended next action
connect_bankFinds the institution and creates a link session, returning the hosted URL to hand to the user
Default and admin toolsets

By default the server lists the core tools (62 API operations, the composites and redbark_guide). Nineteen admin tools (API keys, consents, sync category mappings, category reset, ruleset duplicate/reorder, event destination enable/disable/ping/rotate, destination rotate_secret/enable) are hidden but still callable; add ?toolsets=admin to the server URL to list them. The list is also filtered to the scopes you granted.

Prompts and guides

Clients that support MCP prompts get set_up_sync, monthly_spending_review, fix_failing_sync and connect_bank. redbark_guide returns a topic guide (onboarding, syncs and destinations, rules and categories, events and webhooks, errors and scopes, API conventions) generated from the docs, and the server sends short usage instructions on connect.

Every tool takes a context argument: a one-line statement of the goal the user is trying to reach. It is used for product analytics and never contains your banking data.

Example prompts once connected:

"What did I spend on groceries across all my accounts last month?"

"What's my total cash balance right now?"

"Create a sync from my everyday account to the Budget sheet and run it now."

"Add a rule that tags Uber transactions as Travel."

Authentication & scopes

OAuth (recommended). The server implements the standard MCP authorization flow (OAuth 2.1 with Dynamic Client Registration and PKCE). Clients that support MCP OAuth need only the server URL. Registration, browser consent, and token refresh are automatic. Scopes offered on the consent screen:

ScopeGrants
mcp:readEvery read tool
brokerage:readHoldings and trades (Professional plan)
account:readget_me
connections:read, connections:writeConnections, consents, institutions; revoke, reauthorize, refresh, link sessions
data:readAccounts, balances, transactions, holdings, trades, provider categories
categories:read, categories:writeYour category taxonomy
destinations:read, destinations:writeDestinations and destination links
syncs:read, syncs:writeSyncs, runs, category mappings, ruleset attachment
rules:read, rules:writeRulesets and rules
events:read, events:writeEvents and event destinations

keys:write is never offered over OAuth: an OAuth-connected agent cannot create API keys. Write scopes are optional. Leave one unticked and the matching tools refuse with a message that names the scope.

You can review and revoke any connected agent at any time from Connected Apps in your Redbark settings.

API key (fallback). For clients without OAuth support, create a key at app.redbark.com → Settings → API Keys and send it as Authorization: Bearer rbk_live_.... The key's own scopes apply.

Security

  • No stored banking data. Redbark proxies data live from providers at request time; customer banking data is never persisted to Redbark's database.
  • Regulated data access. Australian bank connections run on the CDR (open banking) framework. Credentials go to your bank, never to Redbark or your agent.
  • Scoped access. The AI can only use the scopes you grant. Reads and each write family are separate. Nothing can touch your bank itself; writes change Redbark syncs, destinations, rules, categories and event destinations only.
  • Revocable. Revoke a connected app from the dashboard at any time. The server immediately stops accepting its tokens.
  • Traceable. Every error carries a request id you can quote to support.
  • Requests are rate-limited pre- and post-authentication, and every request is auditable.

Pricing

MCP access requires a Developer or Professional plan and is included in the free trial. Brokerage tools (list_holdings, list_trades) require Professional.

Support

License

This repository (documentation and assets) is MIT licensed. The hosted service is governed by the Redbark terms.

PopNx에게 묻기