프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Cochlea

제작자: richer-richard버전 0.7.0i★ 15i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.richer-richard/cochlea-mcp

설치 방법

What it does

Render, analyze, and verify audio (WAV/FLAC/mp3/ogg) offline and deterministically via MCP tools.

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed
  • Category 디자인, 이미지 및 오디오

함께 쓰기

이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다

impeccable

The design vocabulary for your coding agent. Steer with polish and bolder, review with critique and audit, catch AI slop before it ships.

제작자: pbakaus★ 112,544skill 1개

Skill · 안내서

diagram-design

Editorial diagram design for Claude Code, Codex, GitHub Copilot, Cursor, Factory Droid, Qoder, and Pi. 45 diagram types. Self-contained HTML + SVG. No shadows. No Mermaid slop.

제작자: cathrynlavery★ 68,069skill 1개

Skill · 안내서

frontend-slides

Create beautiful slides on the web using a coding agent's frontend skills

제작자: zarazhangrui★ 32,514skill 1개

Skill · 안내서

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기14/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성7/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수22/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

검사 3/3 통과 · 내 컴퓨터에서 실행돼요

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

  1. 제작자 설치 파일 내려받기

    제작자의 .mcpb 파일 다운로드

    .mcpb 파일은 제작자에게서 바로 온 것으로, 우리는 바꾸지 않았어요

  2. 파일을 두 번 클릭한 뒤 컴퓨터용 Claude 앱에서 Install 누르기

  3. 해 보기

    Cochlea을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Cochlea을 쓰고 있다고 하거나 답에 Cochlea 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Cochlea에 연결할 수 없어요

Cochlea는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Cochlea에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

B · 디자인, 이미지 및 오디오에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code는 아직 Cochlea에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · Cochlea에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

Cursor는 아직 Cochlea에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · Cochlea에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

VS Code는 아직 Cochlea에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · Cochlea에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Cochlea을 쓰는 사람에게 물어보세요💬 토론 →

한눈에 보기

주간 다운로드i
npm/PyPI에 없음
라이선스i
Apache-2.0
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.7.0
레지스트리 공개i
2026년 8월 13일
코드 마지막 변경i
2026년 9월 19일
제작자
richer-richard
패키지
mcpb: …/cochlea-mcp.mcpb
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 richer-richard 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 2개월 전

  • ✓ 통과

    라이선스 있음

    Apache-2.0 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

확인 안 함: 버전이 있는 npm과 PyPI 패키지만 확인할 수 있습니다

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/richer-richard-cochlea-mcp.svg)](https://mcp.popnx.com/en/servers/richer-richard-cochlea-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

디자인, 이미지 및 오디오 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 3275개 중 94%보다 스타가 많아요
  • 이 카테고리의 다른 서버 3275개 중 18%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 3275개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Cochlea, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 2개월 전 변경됐고, 최신 버전(0.7.0)은 3개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 MCPB도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: HyperFrames by HeyGen, Pascal 3D Editor, draw.io, Figma MCP Server, Remocn: Remotion MCP server

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Pascal 3D Editor

Create, inspect, validate, and save editable 3D building scenes with Pascal's MCP server.

제작자: pascalorg널리 사용됨↓ 1천/주★ 2.6만 저장소 전체의 별어제 업데이트

컴퓨터 또는 클라우드✓ 서비스 회사 · pascal.app

draw.io

Create draw.io diagrams in chat from Mermaid or XML, shown live and interactive. 10,000+ shapes.

제작자: jgraph널리 사용됨★ 5.8천그저께 업데이트

클라우드에서 실행✓ 서비스 회사 · draw.ioPopNx 팀이 직접 써 봄

Figma MCP Server

The Figma MCP server brings Figma design context directly into your AI workflow.

제작자: figma널리 사용됨★ 2.2천13개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · mcp.figma.com
비슷한 항목과 비교
이 항목
Cochlea
HyperFrames by HeyGenPascal 3D Editordraw.ioFigma MCP ServerRemocn: Remotion MCP server
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드 또는 컴퓨터 설치 모두 가능클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요예아니요아니요예아니요
기본 점검3/34/45/54/44/44/4
라이선스Apache-2.0Apache-2.0MITApache-2.0–MIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

cochlea

A headless audio engine for agents. Write a score as data, render it offline to deterministic PCM, then *listen through numbers* — loudness, onsets, pitch, key, spectrograms — and assert what you heard. Compose → render → probe → verify, with no human ear (and no audio device) in the loop.

*What the agent sees: the mel spectrogram of examples/scores/first_light.ron — the score used in the example below — after render and probe. No PCM in sight.*

use cochlea_score::*;

let score = Score::new(SampleRate(48_000), Ppq(960)) .time_signature(4, 4) .tempo(Ticks(0), Bpm(120.0)) .track("lead", Instrument::preset("saw_lead")) .note("lead", bar(1).beat(1), Dur::quarter(), Pitch::A4, Vel(96)) .automate("lead", Param::CUTOFF_HZ, keys![(bar(1), 400.0, ease_in_out()), (bar(3), 4_000.0)]);

let rendered = cochlea_render::render(&score)?; rendered.write_wav("mix.wav")?;

use cochlea_verify::{VerifyExt, Tol, Ms, Cents, Db}; let report = rendered.verify(&score) .true_peak_below(-1.0) .pitch_matches_score("lead", Cents(10.0)) .monotone("lead", Param::CUTOFF_HZ, bar(1)..bar(3)) .silent_after(bar(5)) .run(); assert!(report.passed);

Or entirely from the command line, score as RON:

cochlea render score.ron --out mix.wav --stems stems/ --verify

cochlea probe input.wav --json report.json --spectro spec.png cochlea probe input.wav --digest --window-ms 500 cochlea probe input.mp3 --from 42.0 --to 44.5 # zoom into a window, any format cochlea diff a.wav b.wav --tier2 --spectro delta.png cochlea lint score.ron cochlea spectro input.wav --out spec.png --annotate # draw beats/onsets/pitch on the image cochlea import song.mid --out score.ron # SMF -> score, timing exact cochlea transcribe solo.wav --out score.ron # audio -> score, the inverse of render cochlea reference # the full score-authoring reference, generated from the live preset bank

cochlea probe works on any WAV, plus FLAC (decoded bit-exact), mp3, and ogg — still without ffmpeg, and with no score required. That's the front door: point it at audio you didn't render, and you get the same JSON report and spectrogram an agent uses to review its own work.

How an agent listens

compose → render → probe (JSON) → spectrogram (one vision call) → verify

  1. compose a score as data (RON, or the Rust builder above).
  2. render it to deterministic PCM — cochlea render score.ron --out mix.wav.
  3. probe the mix into a compact JSON report (loudness, onsets, pitch, key, silence, clipping) — cochlea probe mix.wav --json report.json. No image, no audio: the agent reads numbers.
  4. look, when numbers aren't enough — cochlea spectro mix.wav --out spec.png renders one small PNG the agent reviews in a single vision call instead of reasoning about raw samples.
  5. verify — cochlea render score.ron --verify runs the score's embedded assertions and exits nonzero on failure. An agent can retry on its own, without a human confirming "yes, that sounds right."

When something in the middle of a long file needs a closer listen, every read tool takes --from/--to. Probe just bars 17–19, or draw a spectrogram of just the drop. The cut is frame-exact, report times are relative to it, and source.start_ms records where it came from. That turns the whole stack into a zoom lens instead of a whole-file-only report.

The economics are the point here, not an afterthought. The first_light render above is 7 seconds of 48 kHz 32-bit-float PCM, which is 2.7 MB. A 3-minute piece at the same settings runs about 66 MB. You would not hand that to an agent as text, and reading it sample by sample is worse.

Its probe report is a few KB of JSON instead. Here is schema v5, trimmed to the interesting fields. Note pitch.melody: the piece's bass line and melody read back as *note events*, which is the read-back half of the compose loop.

{

"schema_version": 5, "source": { "sample_rate": 48000, "channels": 2, "duration_ms": 7035.708333333333, "start_ms": 0.0 }, "loudness": { "integrated_lufs": -22.700454879284784, "true_peak_dbtp": -15.910817022082783, "lra": 10.607660373688798 }, "onsets": { "count": 6, "times_ms": [1077.33, 2149.33, 2346.67, 3221.33, 4538.67, 5034.67] }, "pitch": { "voiced_ratio": 0.9847560975609756, "median_f0_hz": 110.00194603797897, "melody": [ { "name": "A2", "start_ms": 0.0, "end_ms": 1045.3, "cents_off": 0.1 }, { "name": "E2", "start_ms": 1077.3, "end_ms": 2112.0, "cents_off": 0.3 }, { "name": "F#2", "start_ms": 2154.7, "end_ms": 3178.7, "cents_off": 0.2 }, { "name": "E2", "start_ms": 3210.7, "end_ms": 4384.0, "cents_off": 0.3 }, { "name": "E5", "start_ms": 4394.7, "end_ms": 5813.3, "cents_off": -0.4 } ] }, "timbre": { "mfcc_mean": [-37.64, 14.47, -4.44, 1.24, "..."], "mfcc_std": ["..."], "frames": 656 }, "key": { "tonic": "E", "mode": "major", "confidence": 0.8093960265638273 }, "tempo": { "bpm": 55.97014925373134, "confidence": 0.6633739386089712, "stability": 0.3333333333333333, "candidates": [ { "bpm": 55.97014925373134, "salience": 0.6633739386089712 }, { "bpm": 112.5, "salience": 0.21588204941945222 } ] }, "rhythm": { "grid_alignment": 0.8333333333333334, "grid": "straight", "offbeat_ratio": 0.4, "clear_rhythm": true }, "stereo": { "width": 0.02967719705208343, "correlation": 0.9981362354107913, "balance": -0.0016380539212361243 }, "structure": { "section_count": 1, "confidence": 0.0 }, "silence": { "trailing_ms": 2485.708333333333 }, "clipping": { "clipped_samples": 0, "true_peak_over_0dbtp": false } }

And the spectrogram is one small image. Here's the title_cue demo — a pad whose cutoff_hz automation sweeps 250 Hz → 5000 Hz across bars 1–3:

*The dark band at the top of the frame narrows as the sweep runs, letting more high-frequency energy through over time. An agent reads that straight off the image. The demo's Monotone(track: "pad", param: "cutoff_hz", ...) assertion checks the same thing numerically.*

To get a whole piece in one image no matter how long it is, --sheet tiles the spectrogram into a contact sheet instead of one long strip. Two bars per tile here, via --bars-per-tile 2:

Reading audio without a context window

probe --digest skips JSON and prints a deterministic text summary instead: one line per feature dimension, then a windowed timeline capped at about 40 rows. Here's real output for the drum_groove demo — 20.8 seconds and four tracks, with the rhythm, stereo, and structure dimensions all in one screenful:

cochlea digest: 20.755s  2ch  48000Hz

loudness: integrated=-24.06 momentary_max=-22.42 true_peak=-5.95 lra=1.61 key: A# minor (conf 0.54) pitch: voiced=23% median=63.8Hz (C2 -42.8c) melody: 6 notes C2 C2 C2 C2 A1 A1 tempo: 110.3bpm (conf 0.79, stability 1.00) alts: 54.9bpm(0.89), 36.6bpm(0.79) rhythm: clear=true grid_align=0.98 (straight) offbeat=0.56 stereo: width=0.07 corr=0.99 bal=-0.01 structure: 1 section onsets: count=58 rate=2.79/s silence: leading=0ms trailing=2545ms clipping: clipped=0 over_0dbtp=false timeline: window=1000ms bucket=1x rows=21 idx t(s) rms peak ons f0 flags 0 0.000-1.000 -25.55 -7.36 4 64.0 - 1 1.000-2.000 -25.61 -8.37 3 63.4 - ...

Tempo and rhythm are reported as *separate axes*, because they change independently. A drum solo can hold a rock-steady pulse while its pattern turns unrecognizable, and that difference is exactly what an agent needs to see.

Here the tempo reads 110.3 BPM, matching the authored 110, and stability 1.00 says the speed never moves across the piece. The alts list surfaces the genuine half-tempo reading at 54.9 BPM — which is actually the stronger raw peak, with the octave prior breaking the tie toward the beat. Metrical ambiguity like that is data an agent can weigh, rather than a coin flip hidden inside the detector.

The rhythm line then says how the *hits* relate to that pulse: 98% of onsets sit on the beat-subdivision grid and 56% land on off-beat subdivisions, so clear=true. That's an eighth-note hat groove, with its syncopation reported as a number.

Under the pre-0.2.0 metric this same groove read clear_rhythm=false at confidence 0.01. Layering hats, kick, snare, and pad across three metrical levels diluted every lag's share of a mass-fraction score. The grid-based rule asks the right question instead.

The (straight) tag is the grid *hypothesis test*: alignment is measured against both straight sixteenths and eighth-note triplets, and the report carries whichever more hits land on. A shuffle or swing take reads grid_align=1.00 (triplet) — recognized as an aligned triplet rhythm — instead of being force-fit to sixteenths and scored sloppy.

cochlea diff compares two files in feature space instead of byte-for-byte — "did my change do what I meant," not "is the file bitwise equal." Real output diffing first_light.wav against title_cue.wav:

verdict: different (duration, loudness, onsets, key)

duration a->b +1264.3 ms loudness integrated -5.95 LU true_peak +5.70 dB lra -8.88 LU onsets matched=0 mean_offset=- max_offset=- unmatched_a=6 unmatched_b=5 pitch delta +0.5 cents key a=E major (conf 0.81) b=A minor (conf 0.86) changed=true segments max_abs_rms_delta 120.99 dB at idx=7 tempo bpm -24.01 bpm stability -0.33 rhythm clear_rhythm_changed=false grid_align -0.03 grid_changed=true timbre mfcc_distance 4.00 stereo width +0.14 correlation -0.08 balance -0.01 structure section_count +0

The timbre row is an MFCC spectral-shape distance, with c0 excluded since that's just loudness. The same instrument re-rendered measures around 0, while swapping a sine for a saw at matched loudness measures well above it. It's the "did the re-render keep the instrument's character" axis, which loudness and pitch can't see.

Add --spectro delta.png and the diff also renders a signed difference heat map: red where B is louder, blue where it's quieter, black where nothing changed. A moved onset shows up as a blue/red vertical pair, and a brightened sweep as a red wedge. What changed becomes visible structure, not just a number.

Diff a render against itself, or a re-render of the same score, and the verdict reads byte-identical instead — the determinism contract above, checked from the outside. --tier2 turns that verdict into a gate: exit 0 for byte-identical or Tier-2-equivalent, exit 1 otherwise, so a CI job or an agent can catch a regression without ever reading a raw sample.

Agents as MCP clients

cochlea-mcp is a stdio MCP server built on the same libraries the CLI uses. It exposes twelve tools — render_score, probe_audio, spectrogram, lint_score, probe_digest, loudness_timeline, `bea

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요