MinerU
Transforms complex documents like PDFs and Office docs into LLM-ready markdown/JSON for your Agentic workflows.
Read your mail and manage your calendar on your own IMAP and CalDAV servers.
제작자가 쓴 원문
이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다
Transforms complex documents like PDFs and Office docs into LLM-ready markdown/JSON for your Agentic workflows.
Agent skills for Obsidian. Teach your agent to use Obsidian CLI and open formats including Markdown, Bases, JSON Canvas.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 4/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 16/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
pim-mcp 설치해 줘. https://mcp.popnx.com/i/robinvdvleuten-pim-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
pim-mcp 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server pim-mcp을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "pim": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "PIM_MCP_PASSWORD", "ghcr.io/robinvdvleuten/pim-mcp:v0.1.0" ], "env": { "PIM_MCP_PASSWORD": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PIM_MCP_PASSWORD에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 pim-mcp의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
키 받는 방법은 아래 제작자 README에 있어요
SettingsDeveloperEdit Config
{
"mcpServers": {
"pim": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"PIM_MCP_PASSWORD",
"ghcr.io/robinvdvleuten/pim-mcp:v0.1.0"
],
"env": {
"PIM_MCP_PASSWORD": "your-value"
}
}
}
}키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
pim-mcp을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 pim-mcp을 쓰고 있다고 하거나 답에 pim-mcp 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
PIM_MCP_READ_ONLY 1로 설정하면 무엇이든 변경할 수 있는 모든 도구를 제거합니다. 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 pim-mcp에 연결할 수 없어요
pim-mcp는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · pim-mcp에 연결되는 앱 쓰기
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
pim-mcp 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server pim-mcp을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user pim --env PIM_MCP_PASSWORD=your-value -- docker run -i --rm -e PIM_MCP_PASSWORD ghcr.io/robinvdvleuten/pim-mcp:v0.1.0 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PIM_MCP_PASSWORD에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 pim-mcp의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
키 받는 방법은 아래 제작자 README에 있어요
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user pim --env PIM_MCP_PASSWORD=your-value -- docker run -i --rm -e PIM_MCP_PASSWORD ghcr.io/robinvdvleuten/pim-mcp:v0.1.0Enter 전에 “your-value”를 내 키로 바꾸세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
pim-mcp이 목록에 있고 연결됨으로 보이면 돼요
pim-mcp을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 pim-mcp을 쓰고 있다고 하거나 답에 pim-mcp 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
PIM_MCP_READ_ONLY 1로 설정하면 무엇이든 변경할 수 있는 모든 도구를 제거합니다. 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
pim-mcp 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server pim-mcp을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "pim": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "PIM_MCP_PASSWORD", "ghcr.io/robinvdvleuten/pim-mcp:v0.1.0" ], "env": { "PIM_MCP_PASSWORD": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PIM_MCP_PASSWORD에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 pim-mcp의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
키 받는 방법은 아래 제작자 README에 있어요
pim-mcp 설정에서 PIM_MCP_PASSWORD가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
pim-mcp을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 pim-mcp을 쓰고 있다고 하거나 답에 pim-mcp 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
PIM_MCP_READ_ONLY 1로 설정하면 무엇이든 변경할 수 있는 모든 도구를 제거합니다. 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
pim-mcp 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server pim-mcp을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "pim": { "type": "stdio", "command": "docker", "args": [ "run", "-i", "--rm", "-e", "PIM_MCP_PASSWORD", "ghcr.io/robinvdvleuten/pim-mcp:v0.1.0" ], "env": { "PIM_MCP_PASSWORD": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) PIM_MCP_PASSWORD에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 pim-mcp의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
키 받는 방법은 아래 제작자 README에 있어요
pim-mcp 설정에서 PIM_MCP_PASSWORD가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
pim-mcp을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 pim-mcp을 쓰고 있다고 하거나 답에 pim-mcp 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
PIM_MCP_READ_ONLY 1로 설정하면 무엇이든 변경할 수 있는 모든 도구를 제거합니다. 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Claude Code
claude mcp add --scope user pim --env PIM_MCP_PASSWORD=your-value -- docker run -i --rm -e PIM_MCP_PASSWORD ghcr.io/robinvdvleuten/pim-mcp:v0.1.0Claude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"pim": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"PIM_MCP_PASSWORD",
"ghcr.io/robinvdvleuten/pim-mcp:v0.1.0"
],
"env": {
"PIM_MCP_PASSWORD": "your-value"
}
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"pim": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"PIM_MCP_PASSWORD",
"ghcr.io/robinvdvleuten/pim-mcp:v0.1.0"
],
"env": {
"PIM_MCP_PASSWORD": "your-value"
}
}
}
}VS Code (mcp.json)
{
"servers": {
"pim": {
"type": "stdio",
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"PIM_MCP_PASSWORD",
"ghcr.io/robinvdvleuten/pim-mcp:v0.1.0"
],
"env": {
"PIM_MCP_PASSWORD": "your-value"
}
}
}
}PIM_MCP_PASSWORD 비밀 필수 envPIM_MCP_READ_ONLY env설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검
레지스트리 이름이 GitHub 계정 robinvdvleuten 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 7일 전
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/robinvdvleuten-pim-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
입력해야 할 값: PIM_MCP_PASSWORD
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 7일 전 변경됐고, 최신 버전(0.1.0)은 7일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.
같은 카테고리에는: Puter MCP, XcodeBuildMCP, Vexa, Atlassian Rovo MCP Server, Anki MCP Server
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Puter MCP enables AI tools to interact with Puter: manage files, websites, workers, and more
XcodeBuildMCP provides tools for Xcode project management, simulator management, and app utilities.
Meeting bot and transcripts for Google Meet, Teams and Zoom. Live or after, speakers labelled.
Connect to Atlassian Jira, Confluence, Loom, and more to search, create, and manage your work.
MCP server for Anki flashcards: adaptive review, notes, media, and deck management via AnkiConnect.
| 이 항목 pim-mcp | Puter MCP | XcodeBuildMCP | Vexa | Atlassian Rovo MCP Server | Anki MCP Server | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 컴퓨터에 설치 필요 |
| 키 필요 | 예 | 아니요 | 아니요 | 예 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 예 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 3/3 | 2/4 | 4/4 | 3/3 |
| 라이선스 | MIT | AGPL-3.0 | MIT | Apache-2.0 | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
PIM is short for personal information manager, the kind of app that keeps your mail and calendar together. pim-mcp lets an AI agent read your mail and manage your calendar on your own servers, with one login. The agent can find the meeting in an email and put it in your calendar in one step, with recurrence and time zones intact. It's built on the assumption that agents make mistakes and that invites come from strangers: your password stays in your keychain, your mail can't be changed, and a stale write can't overwrite an edit you just made on your phone.
--read-only removes every tool that can change something, so the agent can't call them at all.You: Add the meeting from Jan's last email to my calendar.
Agent: mail_search → "Project kickoff", from Jan, has a calendar invite calendar_preview_import → create "Kickoff, phase 1", 15 Jan 09:00–10:00, weekly, overlaps nothing "This adds a weekly meeting from 15 January. Shall I?"
You: Yes.
Agent: calendar_import_from_email → created
Early days. Reading mail and calendars has been tried on one real provider. Creating, changing and importing events have only run against the test servers above, so start with
--read-only.
You need an MCP client such as Claude Code.
1. Install it with Homebrew:
brew install --cask robinvdvleuten/tap/pim-mcp
Each release also has archives for macOS, Linux and Windows, and .deb, .rpm and .apk packages. To run it in Docker instead, see Docker.
2. Add your account. It shows the servers it found and asks before your password goes there. If your provider has app passwords, use one. To add another account later, run the same command with its address. The first account you add is the default.
pim-mcp account add --email you@example.org
3. Check that it can log in:
pim-mcp account test
imap: ok
caldav: ok
4. Connect your MCP client, read-only to begin with. For Claude Code:
claude mcp add pim -- "$(command -v pim-mcp)" serve --read-only
5. Ask your agent something like "What's on my calendar next week?"
When you're happy with what it does, add the server again without --read-only to allow changes.
The image is ghcr.io/robinvdvleuten/pim-mcp. A container has no keychain, so the password comes from PIM_MCP_PASSWORD, which limits you to one account. The account settings live in a folder on your machine that each container mounts.
Put the password in your shell without it going into your history:
read -rs PIM_MCP_PASSWORD && export PIM_MCP_PASSWORD
Add the account and check it:
docker run -it --rm -e PIM_MCP_PASSWORD -v "$HOME/.config/pim-mcp:/home/nonroot/.config/pim-mcp" ghcr.io/robinvdvleuten/pim-mcp account add --email you@example.org
docker run --rm -e PIM_MCP_PASSWORD -v "$HOME/.config/pim-mcp:/home/nonroot/.config/pim-mcp" ghcr.io/robinvdvleuten/pim-mcp account test
Connect Claude Code. This stores the password in Claude Code's own settings:
claude mcp add pim -e PIM_MCP_PASSWORD="$PIM_MCP_PASSWORD" -- docker run -i --rm -e PIM_MCP_PASSWORD -v "$HOME/.config/pim-mcp:/home/nonroot/.config/pim-mcp" ghcr.io/robinvdvleuten/pim-mcp serve --read-only
The container runs as user 65532. On Linux without Docker Desktop, that user needs to own the folder: sudo chown 65532 ~/.config/pim-mcp.
With Go, which downloads the exact version this project needs by itself:
go install github.com/robinvdvleuten/pim-mcp/cmd/pim-mcp@latest
| Tool | What it does | Read-only mode |
|---|---|---|
account_info | Shows an account, its servers and your time zone, and lists your accounts | ✓ |
mail_list_folders | Lists mail folders and their roles | ✓ |
mail_search | Searches a folder by sender, subject, text, date, or whether it holds an invite | ✓ |
mail_get | Reads a message: headers, text (HTML is turned into text) and a list of its parts, or the text of one part | ✓ |
calendar_list_calendars | Lists calendars | ✓ |
calendar_list_events | Lists events in a range, with recurring events expanded | ✓ |
calendar_free_busy | Finds when you're busy | ✓ |
calendar_preview_import | Shows what importing an invite would do, and writes nothing | ✓ |
calendar_create_event | Creates an event, optionally recurring from an RRULE | |
calendar_update_event | Changes an event, or one occurrence of a recurring one | |
calendar_delete_event | Deletes an event, or one occurrence of a recurring one | |
calendar_import_from_email | Adds, updates or cancels an event from an invite |
Mail is always read-only: no tool sends, moves, flags or deletes a message, and reading leaves it unread.
Every tool takes an optional account, the email address of the account to use. Leave it out and the default account is used. An id from mail_search, calendar_list_calendars or calendar_list_events belongs to the account that returned it, so the agent passes the same account again.
Your password
0600 in a 0700 directory).--password flag, so it can't end up in your shell history or process list. A CalDAV URL containing a password is refused.Your connections
Your data
What strangers send you
Invites and mail are treated as hostile input:
What it can't protect you from
Prompt injection is still possible. An email can try to talk your agent into something, and a warning in a tool description is no guarantee. An agent with these tools can read all your mail, and, unless read-only, change or delete calendar events. Your defences are
--read-only,--tools, and an MCP client that asks before calling tools that write.
Finding servers. account add tries built-in settings for mailbox.org, Fastmail and Posteo, then DNS, then the well-known locations providers publish. To skip this, name the servers yourself:
pim-mcp account add --email you@example.org --username you --imap mail.example.org:993 --caldav https://dav.example.org/
One lookup, Mozilla's ISPDB, tells Mozilla your email domain. --no-ispdb turns it off. Your full address is never sent during discovery.
Choosing tools. serve --tools mail_search,mail_get offers only those tools. Read-only mode still applies on top.
Environment variables:
| Variable | Effect |
|---|---|
PIM_MCP_PASSWORD | Uses this password instead of the keychain, for Docker and CI. Only works with a single account; with several it is an error |
PIM_MCP_READ_ONLY=1 | Same as --read-only |
PIM_MCP_DEBUG=1 | Logs each request to stderr: the tool and how long it took, never its arguments or results |
Other commands are account show, which lists the accounts and marks the default, account test [--email ADDRESS], account remove [--email ADDRESS] (--email is needed when you have several) and account default --email ADDRESS, which makes an account the default.
account that gave it a message, calendar or event id. A wrong pairing is usually refused, but that is not guaranteed, so it can read or list the wrong account.FREQ=WEEKLY;BYDAY=MO, and a timed one needs a time zone. Editing covers a whole series or a single occurrence, not "this and following", and a series' rule can't be changed after it is created.Install mise, which fetches the pinned Go, linter and Vale, then set up the commit hook:
mise install && mise run setup
Check a change: formatting, unit tests, lint and known vulnerabilities.
mise run check
Integration tests need Docker. This starts fresh test servers, runs the suite and removes them:
mise run integration
Set PIM_MCP_TEST_NEXTCLOUD=1 to include Nextcloud, and PIM_MCP_TEST_STACK=1 to run a second stack beside t