프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Fldigi MCP

제작자: sbrunner-atx버전 0.4.1i★ 0i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.sbrunner-atx/fldigi-mcp

설치 방법

What it does

Control fldigi (amateur-radio digital modes) over XML-RPC: modem, frequency, rig, log, transmit.

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed · 1 setting to fill in (FLDIGI_CALLSIGN)
  • Category 기타

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수12/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

Fldigi MCP 설치해 줘. https://mcp.popnx.com/i/sbrunner-atx-fldigi-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

설정 1개 입력 필요 (FLDIGI_CALLSIGN) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server Fldigi MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "fldigi": { "command": "uvx", "args": [ "fldigi-mcp" ], "env": { "FLDIGI_CALLSIGN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) FLDIGI_CALLSIGN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Fldigi MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • FLDIGI_CALLSIGN 운영자 호출부호. 송신을 활성화하려면 필수이며, 비워 두면 수신 전용으로 유지됩니다.
      영어 원문 보기Operator callsign. Required to enable transmit; leave blank to stay receive-only.

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  3. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  4. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "fldigi": {
          "command": "uvx",
          "args": [
            "fldigi-mcp"
          ],
          "env": {
            "FLDIGI_CALLSIGN": "your-value"
          }
        }
      }
    }
  5. Claude를 끄고 다시 열기

  6. 해 보기

    Fldigi MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Fldigi MCP을 쓰고 있다고 하거나 답에 Fldigi MCP 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • FLDIGI_HOST fldigi XML-RPC 호스트.
    영어 원문 보기fldigi XML-RPC host.
    · 기본값 127.0.0.1
  • FLDIGI_PORT fldigi XML-RPC 포트.
    영어 원문 보기fldigi XML-RPC port.
    · 기본값 7362
  • FLDIGI_BAND_GUIDANCE 실험적 권고 밴드 안내를 활성화합니다 (on/off)
    영어 원문 보기Enable experimental advisory band guidance (on/off).
    · 기본값 off
  • FLDIGI_REGION 대역 안내에 사용하는 IARU 지역: 1, 2 또는 3.
    영어 원문 보기IARU region for band guidance: 1, 2, or 3.
    · 기본값 2

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Fldigi MCP에 연결할 수 없어요

Fldigi MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Fldigi MCP에 연결되는 앱 쓰기

  • 설정 1개 입력 필요 (FLDIGI_CALLSIGN) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • 설정 1개 입력 필요 (FLDIGI_CALLSIGN) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 설정 1개 입력 필요 (FLDIGI_CALLSIGN) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • 설정 1개 입력 필요 (FLDIGI_CALLSIGN) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

B · 기타에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

설정 1개 입력 필요 (FLDIGI_CALLSIGN) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server Fldigi MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user fldigi --env FLDIGI_CALLSIGN=your-value -- uvx fldigi-mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) FLDIGI_CALLSIGN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Fldigi MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • FLDIGI_CALLSIGN 운영자 호출부호. 송신을 활성화하려면 필수이며, 비워 두면 수신 전용으로 유지됩니다.
      영어 원문 보기Operator callsign. Required to enable transmit; leave blank to stay receive-only.

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  3. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  4. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user fldigi --env FLDIGI_CALLSIGN=your-value -- uvx fldigi-mcp
  5. Claude Code에서 /mcp 입력

    Fldigi MCP이 목록에 있고 연결됨으로 보이면 돼요

  6. 해 보기

    Fldigi MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Fldigi MCP을 쓰고 있다고 하거나 답에 Fldigi MCP 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • FLDIGI_HOST fldigi XML-RPC 호스트.
    영어 원문 보기fldigi XML-RPC host.
    · 기본값 127.0.0.1
  • FLDIGI_PORT fldigi XML-RPC 포트.
    영어 원문 보기fldigi XML-RPC port.
    · 기본값 7362
  • FLDIGI_BAND_GUIDANCE 실험적 권고 밴드 안내를 활성화합니다 (on/off)
    영어 원문 보기Enable experimental advisory band guidance (on/off).
    · 기본값 off
  • FLDIGI_REGION 대역 안내에 사용하는 IARU 지역: 1, 2 또는 3.
    영어 원문 보기IARU region for band guidance: 1, 2, or 3.
    · 기본값 2

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

설정 1개 입력 필요 (FLDIGI_CALLSIGN) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server Fldigi MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "fldigi": { "command": "uvx", "args": [ "fldigi-mcp" ], "env": { "FLDIGI_CALLSIGN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) FLDIGI_CALLSIGN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Fldigi MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • FLDIGI_CALLSIGN 운영자 호출부호. 송신을 활성화하려면 필수이며, 비워 두면 수신 전용으로 유지됩니다.
      영어 원문 보기Operator callsign. Required to enable transmit; leave blank to stay receive-only.

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  3. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    Fldigi MCP 설정에서 FLDIGI_CALLSIGN가 비어 있어요. 내 키를 넣고 저장하세요

  5. Cursor에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    Fldigi MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Fldigi MCP을 쓰고 있다고 하거나 답에 Fldigi MCP 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • FLDIGI_HOST fldigi XML-RPC 호스트.
    영어 원문 보기fldigi XML-RPC host.
    · 기본값 127.0.0.1
  • FLDIGI_PORT fldigi XML-RPC 포트.
    영어 원문 보기fldigi XML-RPC port.
    · 기본값 7362
  • FLDIGI_BAND_GUIDANCE 실험적 권고 밴드 안내를 활성화합니다 (on/off)
    영어 원문 보기Enable experimental advisory band guidance (on/off).
    · 기본값 off
  • FLDIGI_REGION 대역 안내에 사용하는 IARU 지역: 1, 2 또는 3.
    영어 원문 보기IARU region for band guidance: 1, 2, or 3.
    · 기본값 2

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

설정 1개 입력 필요 (FLDIGI_CALLSIGN) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server Fldigi MCP을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "fldigi": { "type": "stdio", "command": "uvx", "args": [ "fldigi-mcp" ], "env": { "FLDIGI_CALLSIGN": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) FLDIGI_CALLSIGN에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Fldigi MCP의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. 설정 1개 입력

    이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.

    • FLDIGI_CALLSIGN 운영자 호출부호. 송신을 활성화하려면 필수이며, 비워 두면 수신 전용으로 유지됩니다.
      영어 원문 보기Operator callsign. Required to enable transmit; leave blank to stay receive-only.

    설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

  3. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  4. 키 입력

    Fldigi MCP 설정에서 FLDIGI_CALLSIGN가 비어 있어요. 내 키를 넣고 저장하세요

  5. VS Code에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    Fldigi MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Fldigi MCP을 쓰고 있다고 하거나 답에 Fldigi MCP 도구 이름이 나오면 연결된 거예요

추가 설정 4개 (입력하지 않아도 사용 가능)

위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.

  • FLDIGI_HOST fldigi XML-RPC 호스트.
    영어 원문 보기fldigi XML-RPC host.
    · 기본값 127.0.0.1
  • FLDIGI_PORT fldigi XML-RPC 포트.
    영어 원문 보기fldigi XML-RPC port.
    · 기본값 7362
  • FLDIGI_BAND_GUIDANCE 실험적 권고 밴드 안내를 활성화합니다 (on/off)
    영어 원문 보기Enable experimental advisory band guidance (on/off).
    · 기본값 off
  • FLDIGI_REGION 대역 안내에 사용하는 IARU 지역: 1, 2 또는 3.
    영어 원문 보기IARU region for band guidance: 1, 2, or 3.
    · 기본값 2

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Fldigi MCP을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user fldigi --env FLDIGI_CALLSIGN=your-value -- uvx fldigi-mcp

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "fldigi": {
      "command": "uvx",
      "args": [
        "fldigi-mcp"
      ],
      "env": {
        "FLDIGI_CALLSIGN": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "fldigi": {
      "command": "uvx",
      "args": [
        "fldigi-mcp"
      ],
      "env": {
        "FLDIGI_CALLSIGN": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "fldigi": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "fldigi-mcp"
      ],
      "env": {
        "FLDIGI_CALLSIGN": "your-value"
      }
    }
  }
}

직접 입력할 값

  • FLDIGI_CALLSIGN 필수 env
    운영자 호출부호. 송신을 활성화하려면 필수이며, 비워 두면 수신 전용으로 유지됩니다.
    영어 원문 보기Operator callsign. Required to enable transmit; leave blank to stay receive-only.
  • FLDIGI_HOST env
    fldigi XML-RPC 호스트.
    영어 원문 보기fldigi XML-RPC host.
  • FLDIGI_PORT env
    fldigi XML-RPC 포트.
    영어 원문 보기fldigi XML-RPC port.
  • FLDIGI_BAND_GUIDANCE env
    실험적 권고 밴드 안내를 활성화합니다 (on/off)
    영어 원문 보기Enable experimental advisory band guidance (on/off).
  • FLDIGI_REGION env
    대역 안내에 사용하는 IARU 지역: 1, 2 또는 3.
    영어 원문 보기IARU region for band guidance: 1, 2, or 3.

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
41/주
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.4.1
카테고리i
기타
레지스트리 공개i
2026년 11월 13일
코드 마지막 변경i
2026년 11월 13일
제작자
sbrunner-atx
패키지
pypi: fldigi-mcp
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 sbrunner-atx 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 6일 전

  • ✓ 통과

    라이선스 있음

    GPL-3.0 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 fldigi-mcp@0.4.1 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 16일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/sbrunner-atx-fldigi-mcp.svg)](https://mcp.popnx.com/en/servers/sbrunner-atx-fldigi-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 20693개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 20693개 중 87%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 20693개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Fldigi MCP, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 6일 전 변경됐고, 최신 버전(0.4.1)은 6일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

제작자: koala73널리 사용됨★ 9.1만3일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

제작자: openstatusHQ널리 사용됨★ 9.3천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

제작자: Klavis-AI성장 중★ 5.8천14개월 전 업데이트

클라우드에서 실행저장소 보관됨✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

제작자: jitsucom널리 사용됨★ 5.1천4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · jitsu.com
비슷한 항목과 비교
이 항목
Fldigi MCP
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/44/44/41/44/4
라이선스GPL-3.0AGPL-3.0AGPL-3.0MITApache-2.0MIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

fldigi-mcp

Project page: ae5vg.com/products/fldigi-mcp

An MCP server for controlling fldigi, the popular amateur-radio digital-modem application, from MCP-aware clients such as Claude Desktop.

fldigi ships a built-in XML-RPC control interface. fldigi-mcp connects to it and exposes the whole API as a small set of logically-grouped MCP tools, so an assistant can read the radio's state and drive the modem, rig, log, and transmitter through plain language.

Status: beta. Signal hunting (find, name and tune to a station from the

receiver audio, 0.2.0) and full API coverage (every one of fldigi's 174 XML-RPC methods

is reachable through a named operation, enforced by a test), callsign-gated

transmit, and an optional experimental Band Guidance feature. Supports the

current fldigi release, 4.2.13, verified live on 2026-09-09.

📻 A field-tested fldigi XML-RPC API reference (free community resource)

Building this server meant mapping fldigi's entire XML-RPC interface and verifying every method against a live build — so we've written it all up and are sharing it freely, whether or not you ever use this MCP server:

  • [docs/fldigi-api.md](https://github.com/sbrunner-atx/fldigi-mcp/blob/main/docs/fldigi-api.md) — a clean, complete, human-readable reference organized by namespace, with transport details, types, worked examples, a transmit-safety section, and field-tested gotchas.
  • [docs/fldigi-api.pdf](https://github.com/sbrunner-atx/fldigi-mcp/blob/main/docs/fldigi-api.pdf) — the same, as a printable PDF.
  • [docs/fldigi-api-spec.md](https://github.com/sbrunner-atx/fldigi-mcp/blob/main/docs/fldigi-api-spec.md) — a terse, machine-readable catalog of all 174 methods (args, return type, read/write/keying).

Verified live against fldigi 4.2.13 via fldigi.list on 2026-09-09 (the method list is identical to 4.2.11, first verified 2026-06-23). It's more complete and current than the public wiki (it documents methods the wiki omits, e.g. TxID, and flags deprecated ones). Independent project — not affiliated with the fldigi / W1HKJ project. Corrections welcome via issues / PRs.

Highlights

  • Complete control — every one of the 174 XML-RPC methods in fldigi 4.2.13 is reachable through a named operation in one of the grouped tools (one permission each; all 22 tools are listed under Tools); tests/test_coverage.py fails the build if a method of the shipped catalog is not wired or an argument type disagrees with fldigi's signature. The fldigi_call escape hatch remains for methods a newer build may add.
  • Safe by default — the callsign is the single transmit gate. With no callsign configured the station is receive-only; nothing can key the radio.
  • Names match fldigi — tools and operations mirror fldigi's own API namespaces and on-screen labels (Op Mode, AFC, SQL, Rev, Lock, RxID/TxID, T/R).
  • No fragile dependencies — talks to fldigi with Python's standard-library xmlrpc.client. The only third-party runtime deps are the MCP SDK and PyYAML (for the optional band-plan data).

Why XML-RPC (and not a third-party library)

fldigi's XML-RPC interface is its official, OS-independent control API. This project talks to it directly rather than through an unmaintained wrapper, keeping the moving parts to Python's standard library and fldigi's own API.

Requirements

To install the desktop connector (.mcpb) all you need is:

  • fldigi running (its XML-RPC server is on by default at 127.0.0.1:7362).

Claude Desktop's uv runtime supplies Python and the dependencies, so end users do not install Python or uv themselves. (That runtime is currently marked experimental, so a recent Claude Desktop is recommended.)

For development from source you additionally need Python 3.10+ and [uv](https://docs.astral.sh/uv/) (and Node.js, only for the MCP Inspector).

Install

Easiest: the desktop connector

Download fldigi-mcp.mcpb from the latest release, then in Claude Desktop open Settings → Desktop app, click Manage next to Extensions, and drag the file onto that page (or use Advanced settings → Install extension). It then shows as a connector under Settings → Customize → Connectors. A short settings form asks for your callsign (everything else has a default). No terminal, no Python, no uv to install.

👉 New to this? Follow the simple [step-by-step install guide](https://github.com/sbrunner-atx/fldigi-mcp/blob/main/docs/INSTALL.md). Also see the install & safety model.

Add the operating skills

The desktop connector installs only the server. Its operating skills are separate downloads: fldigi-operating.skill and signal-hunting.skill, from the latest release or ae5vg.com/downloads.html. In Claude, open Customize → Skills, click Add, then Upload skill, and choose all the files at once.

For Claude Code or another MCP client, copy the folders under skills/ into the client's skills folder, for Claude Code ~/.claude/skills/.

To run the server itself in Claude Code, Codex, Cursor or VS Code, see Other AI assistants for the command or configuration block to copy.

From source (development)
git clone https://github.com/sbrunner-atx/fldigi-mcp.git

cd fldigi-mcp uv sync

Then add it to Claude Desktop's config (~/Library/Application Support/Claude/claude_desktop_config.json on macOS):

{

"mcpServers": { "fldigi": { "command": "uv", "args": ["--directory", "/absolute/path/to/fldigi-mcp", "run", "fldigi-mcp"], "env": { "FLDIGI_CALLSIGN": "AE5VG" } } } }

Restart Claude Desktop and ask *"What's fldigi's status?"*. Omit the env block to run receive-only.

Try it with the MCP Inspector
uv run mcp dev src/fldigi_mcp/server.py

The Signal Browser patch (patches/) — proposed, not yet merged

Status: offered to fldigi's maintainer on 11 September 2026 (w1hkj/fldigi issue 55). Until it is merged, the method names and fields below are a proposal and may change.

fldigi's Signal Browser, the left-hand panel that decodes up to 30 PSK, RTTY or CW stations at once, is not on its XML-RPC API. patches/fldigi-4.2.13-browser-xmlrpc.patch touches four files (psk_browser.h/.cxx, viewpsk.cxx, xmlrpc.cxx) and adds two methods, browser.get_channels (array of {channel, freq, active, text}, text untrimmed, line breaks kept, accumulated since the last clear) and browser.clear. The browser tool and signal_hunt method="browser" use them and say so when fldigi is unpatched. A second patch, patches/fldigi-4.2.13-rsid-hits.patch (applies on top of the first), adds rsid.get_hits and rsid.clear: the RSID bursts the detector accepted, as {utc, mode, hz}. With RSID set to notify-only, fldigi then names the modes on the band without ever switching the modem; the rsid tool reads the list. Both patches are proposed, not merged. Tested on 4.2.13 (macOS, four synthetic PSK31 stations from 0 to -26 dB: all four copied in full). The patch applies to the fldigi git HEAD on SourceForge and is prepared for upstream submission; until it lands, build fldigi from source with it:

tar xf fldigi-4.2.13.tar.gz && cd fldigi-4.2.13

patch -p1 < /path/to/fldigi-mcp/patches/fldigi-4.2.13-browser-xmlrpc.patch ./configure --prefix=$HOME/.local/fldigi && make -j8 && make install

Tools

Each tool is one permission and takes an operation argument, so e.g. "change the mode" is a single permission regardless of which underlying method runs.

ToolControls (fldigi area)
statusquick snapshot: version, mode, frequency, T/R, callsign, band
diagnosticshost/network info for connectivity troubleshooting (no fldigi connection)
applicationprogram info + launch/stop the fldigi process (fldigi.*)
modemOp Mode / modem select, carrier, bandwidth, AFC range, Olivia
frequencydial frequency and waterfall sideband
controlsAFC, SQL, Rev, Lock, RxID, TxID, status fields
transmitT/R, Tune, abort, disable/enable Tx, macros, send — callsign-gated
rigCAT control: mode, frequency, bandwidth, notch, QSY, meters
logLogbook / contest fields; ADIF last/all records
textRX/TX text and data streams
spotspotting / PSK Reporter
wefaxWEFAX (weather fax) mode
navtexNAVTEX / SitorB mode
flmsgflmsg (message forms) interworking
ioARQ / KISS I/O port selection
legacydeprecated methods fldigi still serves, each with its current equivalent named
band_guidanceadvisory band/watering-hole help (experimental)
signal_huntfind and name the signals in the receiver audio; rank CQing stations (experimental, [hunt] extra)
tune_toset modem and carrier to a signal_hunt candidate, receive only
browserfldigi's Signal Browser: every station the decoder bank holds, with its text (needs the fldigi patch in patches/)
rsidRSID bursts heard in the passband, mode and frequency, without switching the modem (needs the rsid-hits patch in patches/)
fldigi_callescape hatch — call any method by name, incl. future ones

Use application → list_methods to enumerate every method the running build supports. On 4.2.13 all of them are surfaced in a group; fldigi_call is for methods a newer fldigi may add before this connector catches up.

Configuration

VariableDefaultPurpose
FLDIGI_HOST127.0.0.1fldigi XML-RPC host
FLDIGI_PORT7362fldigi XML-RPC port
FLDIGI_CALLSIGN_(empty)_Operator callsign. The single transmit gate — set it to enable transmit; blank keeps the station receive-only
FLDIGI_BAND_GUIDANCEoffExperimental advisory band guidance. on to enable
FLDIGI_REGION2IARU region for band guidance: 1, 2, or 3
FLDIGI_PATH_(auto)_Explicit path to the fldigi executable (for application launch)
FLDIGI_AUDIO_DEVICE_(system default)_Input device the signal hunt taps: the name (or part of it) of the device fldigi listens on, e.g. iMic
FLDIGI_HUNT_URL_(empty)_URL of a fldigi-mcp-tap running beside fldigi, e.g. http://127.0.0.1:7365, for when this server cannot open the sound card (sandbox, or fldigi on another machine). Blank taps the local input device

In the packaged desktop connector these appear as a settings form — most users only ever fill in the callsign.

Transmit safety

The callsign is the single transmit gate. Keying operations (transmit tx/tune/run_macro/send, and the wefax/navtex send operations, and any keying method via fldigi_call) refuse unless FLDIGI_CALLSIGN is set. With it blank, the station is receive-only. rx, abort, and disable_tx are always allowed because they take the station *off* the air. Any non-blank value is accepted (club, event, vanity, portable, and international calls all work). See docs/install-and-safety.md.

Band Guidance (experimental, off by default)

An optional, advisory feature that suggests a mode's customary "watering hole" and warns when a frequency falls outside the digital band segment — guidance and defaults, never hard locks. Region-aware (IARU R1/R2/R3), covering

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요