프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Proxmox MCP is an opinionated MCP server

제작자: sergelogvinov버전 0.3.0i★ 5i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.sergelogvinov/proxmox-mcp

설치 방법

What it does

Proxmox MCP is an opinionated MCP server

  • Connects 내 컴퓨터에서 실행
  • Account or key No key needed
  • Category 기타

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기9/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수21/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

Proxmox MCP is an opinionated MCP server 설치해 줘. https://mcp.popnx.com/i/sergelogvinov-proxmox-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 13일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server Proxmox MCP is an opinionated MCP server을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "proxmox": { "command": "docker", "args": [ "run", "-i", "--rm", "ghcr.io/sergelogvinov/proxmox-mcp:v0.3.0" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Proxmox MCP is an opinionated MCP server의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Docker 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    docker --version
    • 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다

    Docker 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version

    한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다

  2. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  3. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "proxmox": {
          "command": "docker",
          "args": [
            "run",
            "-i",
            "--rm",
            "ghcr.io/sergelogvinov/proxmox-mcp:v0.3.0"
          ]
        }
      }
    }
  4. Claude를 끄고 다시 열기

  5. 해 보기

    Proxmox MCP is an opinionated MCP server을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Proxmox MCP is an opinionated MCP server을 쓰고 있다고 하거나 답에 Proxmox MCP is an opinionated MCP server 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Proxmox MCP is an opinionated MCP server에 연결할 수 없어요

Proxmox MCP is an opinionated MCP server는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Proxmox MCP is an opinionated MCP server에 연결되는 앱 쓰기

  • 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
  • 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)

B · 기타에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Docker를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server Proxmox MCP is an opinionated MCP server을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user proxmox -- docker run -i --rm ghcr.io/sergelogvinov/proxmox-mcp:v0.3.0 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Proxmox MCP is an opinionated MCP server의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Docker 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    docker --version
    • 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다

    Docker 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version

    한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다

  2. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  3. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user proxmox -- docker run -i --rm ghcr.io/sergelogvinov/proxmox-mcp:v0.3.0
  4. Claude Code에서 /mcp 입력

    Proxmox MCP is an opinionated MCP server이 목록에 있고 연결됨으로 보이면 돼요

  5. 해 보기

    Proxmox MCP is an opinionated MCP server을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Proxmox MCP is an opinionated MCP server을 쓰고 있다고 하거나 답에 Proxmox MCP is an opinionated MCP server 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Docker를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server Proxmox MCP is an opinionated MCP server을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "proxmox": { "command": "docker", "args": [ "run", "-i", "--rm", "ghcr.io/sergelogvinov/proxmox-mcp:v0.3.0" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Proxmox MCP is an opinionated MCP server의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Docker 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    docker --version
    • 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다

    Docker 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version

    한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  3. Cursor에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Proxmox MCP is an opinionated MCP server을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Proxmox MCP is an opinionated MCP server을 쓰고 있다고 하거나 답에 Proxmox MCP is an opinionated MCP server 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

먼저 컴퓨터에 Docker를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server Proxmox MCP is an opinionated MCP server을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "proxmox": { "type": "stdio", "command": "docker", "args": [ "run", "-i", "--rm", "ghcr.io/sergelogvinov/proxmox-mcp:v0.3.0" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Proxmox MCP is an opinionated MCP server의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. Docker 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    docker --version
    • 버전 번호(예: Docker version …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다

    Docker 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version

    한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다

  2. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  3. VS Code에서 AI 채팅을 Agent 모드로 열기

  4. 해 보기

    Proxmox MCP is an opinionated MCP server을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Proxmox MCP is an opinionated MCP server을 쓰고 있다고 하거나 답에 Proxmox MCP is an opinionated MCP server 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Proxmox MCP is an opinionated MCP server을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user proxmox -- docker run -i --rm ghcr.io/sergelogvinov/proxmox-mcp:v0.3.0

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "proxmox": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "ghcr.io/sergelogvinov/proxmox-mcp:v0.3.0"
      ]
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "proxmox": {
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "ghcr.io/sergelogvinov/proxmox-mcp:v0.3.0"
      ]
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "proxmox": {
      "type": "stdio",
      "command": "docker",
      "args": [
        "run",
        "-i",
        "--rm",
        "ghcr.io/sergelogvinov/proxmox-mcp:v0.3.0"
      ]
    }
  }
}

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
npm/PyPI에 없음
라이선스i
Apache-2.0
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.3.0
카테고리i
기타
레지스트리 공개i
2026년 10월 5일
코드 마지막 변경i
2026년 11월 3일
제작자
sergelogvinov
패키지
oci: ghcr.io/sergelogvinov/proxmox-mcp:v0.3.0
웹사이트
github.com
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 sergelogvinov 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 16일 전

  • ✓ 통과

    라이선스 있음

    Apache-2.0 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

확인 안 함: 버전이 있는 npm과 PyPI 패키지만 확인할 수 있습니다

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/sergelogvinov-proxmox-mcp.svg)](https://mcp.popnx.com/en/servers/sergelogvinov-proxmox-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 20693개 중 95%보다 스타가 많아요
  • 이 카테고리의 다른 서버 20693개 중 50%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 20693개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Proxmox MCP is an opinionated MCP server, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 16일 전 변경됐고, 최신 버전(0.3.0)은 지난달 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

제작자: koala73널리 사용됨★ 9.1만3일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

제작자: openstatusHQ널리 사용됨★ 9.3천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

제작자: Klavis-AI성장 중★ 5.8천14개월 전 업데이트

클라우드에서 실행저장소 보관됨✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

제작자: jitsucom널리 사용됨★ 5.1천4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · jitsu.com
비슷한 항목과 비교
이 항목
Proxmox MCP is an opinionated MCP server
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요아니요아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/44/44/41/44/4
라이선스Apache-2.0AGPL-3.0AGPL-3.0MITApache-2.0MIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Proxmox MCP Server

NOTE:

This project is under active development.

Motivation

Modern infrastructure often uses tools such as Terraform/OpenTofu, Ansible, and GitOps. These tools deploy and configure Proxmox infrastructure and Kubernetes clusters.

The Proxmox MCP Server does not replace these tools. It gives AI assistants and automation agents access to information about your Proxmox clusters.

The default tools are read-only. Optional action tools can be enabled with --allow-destructive for operations such as backups and reboots.

Instead of checking many pages in the Proxmox UI or running several commands, you can ask an AI assistant to collect and analyze the required information. Your existing automation tools remain the main source for infrastructure changes.

Overview

The server connects an MCP client, such as an AI assistant, to the Proxmox VE API. It supports multiple Proxmox clusters and returns structured data.

You can use it to:

  • inspect clusters, nodes, and storage
  • check resource usage and node status
  • review recent Proxmox task events
  • find differences and possible configuration problems
  • collect information before you make infrastructure changes

Keep your AI on the leash.

Proxmox core tools

The MCP server provides the following read-only tools:

ToolArgumentsDescription
proxmox_clusters_listNoneList the configured Proxmox clusters.
proxmox_clusters_describeclusterShow a cluster's version, nodes, node statuses, and total resources.
proxmox_containers_listclusterList LXC containers with their status and resource usage.
proxmox_containers_describecluster, vmid, node (optional)Show an LXC container's current status and runtime network interfaces when it is running.
proxmox_events_listcluster, limit (optional)List recent task events across all nodes. The default limit is 10.
proxmox_nodes_listclusterList nodes with their status and resource usage.
proxmox_nodes_describecluster, nodeShow a node's status, resources, uptime, version, kernel, and boot information.
proxmox_storage_listclusterList storage resources with their status, type, content, and capacity usage.
proxmox_storage_describecluster, name, node (optional)Show storage details and, when a node is provided, content visible on that node.
proxmox_vms_listclusterList QEMU virtual machines with their status and resource usage.
proxmox_vms_describecluster, vmid, node (optional)Show a QEMU virtual machine's current status and guest network interfaces when its QEMU guest agent is responding.

Use proxmox_clusters_list first to find the cluster names used by the other tools. MCP clients can discover the full input and output schemas. You can also list the tools from the command line:

proxmox-mcp tools --config /absolute/path/to/cluster-config.yaml

When --allow-destructive is enabled, proxmox_vms_backup and proxmox_containers_backup accept cluster, vmid, optional node, storage, mode, and compress arguments. They start an asynchronous backup and return its Proxmox task identifier; task creation does not mean that the backup has already completed successfully.

Installation

For a local installation with Homebrew, run:

brew install sergelogvinov/tap/proxmox-mcp

You do not need a local installation when you use an MCP server hosted on another machine.

Configure Proxmox clusters

Create a YAML file that contains one or more Proxmox clusters:

clusters:
  • region: homelab url: https://pve.example.com:8006/api2/json token_id: mcp@pve!reader token_secret_file: /absolute/path/to/token-secret ca_file: /absolute/path/to/proxmox-ca.crt

Each cluster supports these fields:

FieldRequiredDescription
regionYesUnique name used to select the cluster in tool calls.
urlYesFull Proxmox API URL, including /api2/json.
token_idFor token loginProxmox API token ID, for example mcp@pve!reader.
token_id_fileFor token loginFile that contains the token ID. Use this instead of token_id.
token_secretFor token loginProxmox API token secret.
token_secret_fileFor token loginFile that contains the token secret. Use this instead of token_secret.
usernameFor password loginProxmox user name. Must be used with password.
passwordFor password loginProxmox password. Must be used with username.
ca_fileNoPath to the CA certificate used to check the Proxmox TLS certificate.
insecureNoSkip TLS certificate checks. Use only for local testing. Default: false.

Use either token login or password login for a cluster, not both. Files are recommended for secrets because they keep secret values out of the YAML file. The Proxmox account should have only the permissions required by the tools.

Set the configuration path with --config or CONFIG_FILE.

Configure an MCP client

Local stdio server

For clients that use a JSON MCP configuration, add an entry like this:

{

"mcpServers": { "proxmox": { "command": "proxmox-mcp", "args": ["mcp"], "env": { "CONFIG_FILE": "/absolute/path/to/cluster-config.yaml" } } } }

Remote HTTP server

Start the streamable HTTP server with:

proxmox-mcp server \

--config /absolute/path/to/cluster-config.yaml \ --listen-address :8080

:8080 accepts connections on every IPv4 and IPv6 address. To listen on one address, give it with the port, for example 127.0.0.1:8080 or [::1]:8080. The MCP endpoint is http://host:8080/mcp

For a remote client, use an HTTPS URL that ends with /mcp:

{

"mcpServers": { "proxmox": { "type": "http", "url": "https://proxmox-mcp.example.com/mcp", "headers": { "Authorization": "Bearer PVEAPIToken=mcp@pve!reader=TOKEN_SECRET" } } } }

The server does not provide user authentication for the HTTP endpoint. It relies on Proxmox authentication and API tokens for access control. Provide the token in mcp header like:

Authorization: PVEAPIToken=mcp@pve!reader=TOKEN_SECRET

When this header is present, its token is used for the tool call instead of the credentials from the cluster configuration. The configured cluster must still include region and url.

Restart or reload the MCP client after you save its configuration.

Running

Common flags

The mcp, server, and tools commands use the following flags. Each flag can also be set with an environment variable. A command-line flag has higher priority than an environment variable.

FlagEnvironment variableDefaultDescription
--config CONFIG_FILENonePath to the required clusters YAML configuration file.
--extensions EXTENSIONSallComma-separated list of extensions to enable, or all.
--allow-destructiveALLOW_DESTRUCTIVEfalseAllow destructive tools when they are available. Current core tools are read-only.
--log-level LOG_LEVELinfoLog level: debug, info, warn, or error.
--log-format LOG_FORMATtextLog output format: text or json.

The server command also accepts --listen-address or LISTEN_ADDRESS (host:port). The default is 127.0.0.1:8080, and the container image sets LISTEN_ADDRESS=:8080. The tools command accepts --output (-o) with text, json, or yaml. Its default is text.

For example, run the stdio server with JSON logs:

proxmox-mcp mcp \

--config /absolute/path/to/cluster-config.yaml \ --log-format json

Test the configuration

List all available tools:

export CONFIG_FILE="/absolute/path/to/cluster-config.yaml"

proxmox-mcp tools

Call a tool directly:

proxmox-mcp tools proxmox_clusters_list

proxmox-mcp tools proxmox_nodes_list cluster=homelab proxmox-mcp tools -o json proxmox_events_list cluster=homelab limit=5

License

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.


Proxmox® is a registered trademark of Proxmox Server Solutions GmbH.