프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요
초보자 모드 켜기
색상시스템 설정라이트다크
언어ไทยEnglish中文日本語한국어EspañolDeutsch
☰ 메뉴설정
초보자 모드 켜기
색상시스템 설정라이트다크
언어ไทยEnglish中文日本語한국어EspañolDeutsch

ConnectWise Control MCP

제작자: servosity버전 0.1.10i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.Servosity/connectwise-control-mcp

설치

개요

제작자가 쓴 설명(영어 원문)

Manage ConnectWise Control (ScreenConnect) remote support and access sessions from one CLI or agent.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 기타
  • 입력해야 할 값: CONNECTWISE_CONTROL_BASE_URL, CONNECTWISE_CONTROL_USERNAME, CONNECTWISE_CONTROL_PASSWORD, CONNECTWISE_CONTROL_MCP_HTTP_TOKEN, PRINTING_PRESS_CLIENT_PROFILE

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 직접 입력할 값: CONNECTWISE_CONTROL_BASE_URL, CONNECTWISE_CONTROL_USERNAME, CONNECTWISE_CONTROL_PASSWORD, CONNECTWISE_CONTROL_USER_AGENT, CONNECTWISE_CONTROL_MCP_READ_ONLY, CONNECTWISE_CONTROL_NO_LOCAL_DATA, CONNECTWISE_CONTROL_MCP_HTTP_TOKEN, PRINTING_PRESS_CLIENT_PROFILE

비밀로 표시된 값은 내 계정의 열쇠예요. 절대 다른 사람과 공유하거나 채팅에 붙여 넣지 마세요.

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

제작자의 .mcpb 파일 다운로드

링크는 제작자의 파일로 바로 연결돼요. 우리가 보관하거나 다시 패키징하지 않아요. 파일을 열면 Claude Desktop이 설치해요.

터미널에서 이 명령어를 실행하세요

실행하기 전에 빈 값을 채워 주세요.

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

직접 입력할 값

  • CONNECTWISE_CONTROL_BASE_URL 필수 env
    Your ScreenConnect instance base URL, e.g. https://company.screenconnect.com (per-instance).
  • CONNECTWISE_CONTROL_USERNAME 비밀 필수 env
    Your ConnectWise Control instance user name (HTTP Basic auth).
  • CONNECTWISE_CONTROL_PASSWORD 비밀 필수 env
    Your ConnectWise Control instance password (HTTP Basic auth).
  • CONNECTWISE_CONTROL_USER_AGENT env
    Optional. Overrides the User-Agent the CLI sends on ConnectWise Control requests. Leave blank to use the CLI's own built-in User-Agent.
  • CONNECTWISE_CONTROL_MCP_READ_ONLY env
    Optional. Set to exactly 1 to expose only read-only tools and refuse any state-changing call. Leave blank to keep every tool available.
  • CONNECTWISE_CONTROL_NO_LOCAL_DATA env
    Optional. Set to 1 to keep no local copy of API responses: reads go to the API and the response cache is off. Leave blank to keep the local store.
  • CONNECTWISE_CONTROL_MCP_HTTP_TOKEN 비밀 env
    Required only when running the MCP server with --transport http (32 characters or more). Callers must send a matching Authorization: Bearer header. Not needed for the default local stdio transport th…
  • PRINTING_PRESS_CLIENT_PROFILE 비밀 env
    Optional: binds the MCP server to an existing tenant-gated Printing Press client profile. Leave unset for a single-tenant install.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 servosity 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32505개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32505개 중 98%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32505개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

ConnectWise Control MCP, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: CONNECTWISE_CONTROL_BASE_URL, CONNECTWISE_CONTROL_USERNAME, CONNECTWISE_CONTROL_PASSWORD, CONNECTWISE_CONTROL_MCP_HTTP_TOKEN, PRINTING_PRESS_CLIENT_PROFILE

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.1.10)은 오늘 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 MCPB도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, topo^alpin

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

topo^alpin

제작자: topoalpin.app

Avalanche bulletins and mountain weather forecasts for any place in the Alps.

클라우드에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

ConnectWise Control + AI - for Claude, the ChatGPT desktop app, GitHub Copilot, Gemini CLI, and any agent that speaks MCP

Unofficial. Community-built Claude Code Skill and MCP server for the ConnectWise

Control (ScreenConnect) API. Not affiliated with, endorsed by, or sponsored by ConnectWise, LLC.

▶ Watch the 30-second demo - demo data is simulated; every command shown exists in the real CLI.

Manage ConnectWise Control (ScreenConnect) remote support and access sessions from the terminal or your AI agent: list and inspect sessions across groups, run commands on guest machines, rename and tag sessions, manage instance users, and query the audit log - the whole instance from one CLI. Works with the AI you already use - ChatGPT (desktop app), Claude Desktop, Codex, Claude Code, Claude Cowork, and GitHub Copilot - plus Gemini CLI. Free, open source, runs on your laptop. Built for MSP owners. No code required.

Works with your agent

Security note (until this connector is reprinted). Do not run HTTP mode

(--transport http), not even on localhost. This build has no password,

listens on every network interface, and predates the browser-rebinding guard,

so a web page you open can reach it. The MCP tools can also make changes with

your credentials. Use the default stdio transport. If you set up a tunnel for

a remote agent, shut it down. A fix is on the way.

The six agents MSP owners actually use (self-serve, works today):

Your AI agentHow to install the ConnectWise skill
Claude DesktopRun installer, then Settings > Extensions to register connectwise-control-mcp (no JSON editing).
ChatGPT (desktop app)Run installer, then add connectwise-control-mcp in Settings > MCP servers as a local (STDIO) server. ChatGPT on the web is not supported yet.
Codex CLIPaste the install prompt below.
Claude CodePaste the install prompt below.
Claude CoworkPaste the install prompt below.
GitHub Copilot (VS Code)Run installer, add connectwise-control-mcp to mcp.json under the servers key, then pick Agent mode.

The ChatGPT desktop app runs connectwise-control-mcp locally and shares MCP configuration with Codex (OpenAI). ChatGPT on the web needs a remote (HTTP) server, and this connector's HTTP mode is paused until it is reprinted (see the security note in mcp-install.md), so msp-skills does not support it yet. If your team works there, a hosted gateway is the better pick; check that your AI app is on the gateway's setup list.

Also for the Microsoft and Google stacks

Big install base, but an honest heads-up: Gemini CLI runs the local binary you just installed, while Microsoft 365 Copilot and the Gemini app need a remote server, which msp-skills does not support yet.

AgentWhat it takes
Microsoft 365 Copilot / Copilot StudioNot supported by msp-skills yet: it needs a remote server. A hosted gateway is the better pick; check that your AI app is on the gateway's setup list.
Google GeminiGemini CLI is local - same as Claude Code. See mcp-install.md. The Gemini app needs a remote server and is not supported by msp-skills yet.

Skill-native agents (also covered): Hermes and OpenClaw read this skill's SKILL.md directly *and* speak MCP - see their install sections below. Also works with Cursor, Windsurf, Cline, Continue.dev, and Zed via MCP. Full per-tool wire-up: [docs/which-agent.md](../../docs/which-agent.md).

Run more than one agent? Install across all 51+ supported agents in one command: npx skills add Servosity/msp-skills@latest (requires Node.js, then run the per-skill installer for the CLI/MCP binaries). See docs/which-agent.md.

Install in 60 seconds

Fastest for Claude Desktop - one-click .mcpb

Claude Desktop bundle: the .mcpb launches on macOS (Intel and Apple Silicon), Windows x64 and Linux x64. Every tool shells out to the companion connectwise-control-cli. Releases cut from 2026-09-18 on ship that CLI inside the bundle; older bundles contain only the MCP server, so if yours lacks the companion, run the Path A or Path B installer below first (or set CONNECTWISE_CONTROL_CLI_PATH to an existing binary). Details: #331.

Download ConnectWise MCP (.mcpb) - then open Claude Desktop > Settings > Extensions and select the file. One click, no JSON, no shell. (Browse every ConnectWise release on the releases page.)

Prefer the Claude Code plugin? Add the marketplace once, then install - works immediately, no directory listing required:

/plugin marketplace add Servosity/msp-skills

/plugin install connectwise-control@msp-skills

Path A - paste one prompt into your AI agent (recommended)

Copy this into Claude Code, Codex CLI, or Claude Cowork:

Install the ConnectWise Skill and MCP server from Servosity/msp-skills in this agent workspace. If this workspace uses a POSIX shell (macOS, Linux, WSL, or Bash), run bash <(curl -fsSL https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/connectwise-control/install.sh). If it uses Windows PowerShell, run iwr -useb https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/connectwise-control/install.ps1 | iex. Then authenticate per the README and run connectwise-control-cli --help to explore.

The same prompt works in any agent that can run shell.

Path B - run the installer yourself

Windows (PowerShell):

iwr -useb https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/connectwise-control/install.ps1 | iex

macOS / Linux:

bash <(curl -fsSL https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/connectwise-control/install.sh)

The installer drops both connectwise-control-cli (the CLI) and connectwise-control-mcp (the MCP server) into your user bin path. Claude Code, Codex, and Cowork discover the Skill via SKILL.md in this directory.

Verify:

connectwise-control-cli --version
Upgrade to the latest version

The installer always fetches the current release - re-run it to upgrade:

macOS / Linux:

bash <(curl -fsSL https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/connectwise-control/install.sh)

Windows (PowerShell):

iwr -useb https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/connectwise-control/install.ps1 | iex

Claude Desktop .mcpb users: download the latest .mcpb (top of this section) and re-select it in Settings > Extensions. Claude Code plugin users: /plugin update connectwise-control@msp-skills.

Add to Claude Desktop, the ChatGPT desktop app, GitHub Copilot, Gemini CLI, or another MCP client

After the installer runs, see [mcp-install.md](./mcp-install.md) and [docs/which-agent.md](../../docs/which-agent.md) for the per-agent wire-up - one section per agent, including the GitHub Copilot servers key and the ChatGPT desktop app. Claude Desktop's Settings > Extensions panel is the simplest path; the MCP config block (for users who prefer editing JSON) is documented in mcp-install.md.

Install for Hermes

From the Hermes CLI:

hermes skills install servosity/msp-skills/skills/connectwise-control --force

Inside a Hermes chat session:

/skills install servosity/msp-skills/skills/connectwise-control --force

Hermes speaks MCP natively, so it can also use the connectwise-control-mcp server directly - same install path, same env vars.

Install for OpenClaw

Tell your OpenClaw agent (copy this):

Install the connectwise-control skill from https://github.com/servosity/msp-skills/tree/main/skills/connectwise-control. The skill defines how its required CLI (connectwise-control-cli) can be installed via the openclaw: frontmatter block.

OpenClaw isn't generally available yet; the frontmatter wiring is pre-shipped and will activate the moment OpenClaw launches.

Authenticate

Set the credentials the CLI needs (from your ConnectWise portal):

CONNECTWISE_CONTROL_BASE_URL=<value> CONNECTWISE_CONTROL_USERNAME=<value> CONNECTWISE_CONTROL_PASSWORD=<value> connectwise-control-cli doctor

doctor confirms the credentials work before you run anything that touches data. It exits 0 even when the credential is rejected, so scripts should add --fail-on error.

What this skill does

Question your MSP keeps askingCommand
Which access sessions are in this group?connectwise-control-cli sessions list --session-type Access --agent
Show the full detail for one sessionconnectwise-control-cli sessions get-detail --session-id --agent
What session groups exist on the instance?connectwise-control-cli session-groups --agent
Run a command on a guest machine (approval-gated)connectwise-control-cli sessions run-command --session-id --command "..." --agent
Who are the instance users and roles?connectwise-control-cli security get-configuration --agent
What's in the audit log for a session?connectwise-control-cli audit query-log --session-name "ACME-WS01" --agent
Rename a sessionconnectwise-control-cli sessions update-name --session-id --new-name "..." --agent

Full command reference: guide.md. For the AI-agent operating contract (--agent, --dry-run, when to confirm before mutating), see AGENTS.md.

What makes this different

ConnectWise Control (ScreenConnect) is a web console with no first-party CLI - built for a technician driving one remote session interactively. There's no terminal-native way to list, search, or act on sessions in bulk, or to hand the work to an AI agent.

This skill turns the instance's session, group, user, and audit surface into typed commands with JSON output and an offline SQLite mirror for fast session lookups. An agent can list and inspect sessions, read the audit log, and - with your approval - run a command on a guest machine, all from the terminal instead of clicking through the console one session at a time. It complements the live console; it doesn't replace the eyes-on remote-control experience.

The pain this closes

ConnectWise Control (formerly ScreenConnect) is where a huge number of MSPs run remote support - and it's a web console built for a tech driving one session at a time. On r/msp and in the ScreenConnect community, the recurring ask is the same: there's no first-party CLI, no terminal-native way to work with sessions in bulk. "Which machines have an open session?", "what happened on this endpoint?", or "run this one command across these five machines" means scrolling the console and

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요

PopNx에게 묻기