프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Domain and Certificate Tracker MCP

제작자: servosity버전 0.1.4i★ 82 (저장소 전체의 별)i내 컴퓨터에서 실행
레지스트리 이름io.github.Servosity/domain-cert-tracker-mcp

설치 방법

What it does

Every client's domains and certificates in one inventory: what expires, unlocks or changes.

  • Connects 내 컴퓨터에서 실행
  • Account or key Needs DOMAIN_CERT_TRACKER_MCP_HTTP_TOKEN
  • Category 온라인 쇼핑몰 및 결제

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기0/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수12/100

품질: 기본 점검 2/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

검사 2/3 통과 · 내 컴퓨터에서 실행돼요

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

  1. 제작자 설치 파일 내려받기

    제작자의 .mcpb 파일 다운로드

    .mcpb 파일은 제작자에게서 바로 온 것으로, 우리는 바꾸지 않았어요

  2. 파일을 두 번 클릭한 뒤 컴퓨터용 Claude 앱에서 Install 누르기

  3. 해 보기

    Domain and Certificate Tracker MCP을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Domain and Certificate Tracker MCP을 쓰고 있다고 하거나 답에 Domain and Certificate Tracker MCP 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Domain and Certificate Tracker MCP에 연결할 수 없어요

Domain and Certificate Tracker MCP는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · Domain and Certificate Tracker MCP에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

B · 온라인 쇼핑몰 및 결제에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code는 아직 Domain and Certificate Tracker MCP에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · Domain and Certificate Tracker MCP에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

Cursor는 아직 Domain and Certificate Tracker MCP에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · Domain and Certificate Tracker MCP에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

VS Code는 아직 Domain and Certificate Tracker MCP에 연결할 수 없어요

제작자가 컴퓨터용 Claude 앱 설치 파일만 제공해요

대신 이렇게 할 수 있어요

A · Domain and Certificate Tracker MCP에 연결되는 앱 쓰기

  • 키 필요 없음, 설치 필요 없음 · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Domain and Certificate Tracker MCP을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

직접 입력할 값

  • DOMAIN_CERT_TRACKER_BASE_URL env
    Optional server for single lookups. Leave the default; sweep always routes each domain to its registry. A server named here is reached even on a private address or another port.
  • PRINTING_PRESS_CLIENT_PROFILE 비밀 env
    Optional: binds the MCP server to an existing tenant-gated Printing Press client profile. Leave unset for a single-tenant install.
  • DOMAIN_CERT_TRACKER_MCP_READ_ONLY env
    Optional. Set to exactly 1 to expose only read-only tools and refuse any state-changing call.
  • DOMAIN_CERT_TRACKER_NO_LOCAL_DATA env
    Optional. Set to 1 to keep no local store or response cache; sweep is then refused.
  • DOMAIN_CERT_TRACKER_USER_AGENT env
    Overrides the User-Agent the CLI sends to RDAP servers and crt.sh.
  • DOMAIN_CERT_TRACKER_MCP_HTTP_TOKEN 비밀 필수 env
    Required only when running the MCP server with --transport http. Not needed for the default local stdio transport.

설명은 아직 영어 원문입니다.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

GitHub 스타i
82 (저장소 전체의 별)
이 저장소에는 MCP 항목이 여러 개 있어 별은 순위에서 한 번만 세요
주간 다운로드i
npm/PyPI에 없음
라이선스i
라이선스 표시 없음
연결 방식
내 컴퓨터에서 실행
최신 버전i
0.1.4
레지스트리 공개i
2026년 11월 12일
코드 마지막 변경i
2026년 11월 15일
제작자
servosity
패키지
mcpb: …/domain-cert-tracker-mcp.mcpb
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 16일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 Servosity 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 어제

  • ! 주의

    라이선스 있음

    GitHub가 라이선스 종류를 알아내지 못했어요. 파일을 열어 확인하세요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

확인 안 함: 버전이 있는 npm과 PyPI 패키지만 확인할 수 있습니다

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/servosity-domain-cert-tracker-mcp.svg)](https://mcp.popnx.com/en/servers/servosity-domain-cert-tracker-mcp)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

온라인 쇼핑몰 및 결제 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 2832개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 2832개 중 86%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 2832개 중 59%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Domain and Certificate Tracker MCP, 안전한가요?

해당하는 기본 점검 3개 중 2개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: DOMAIN_CERT_TRACKER_MCP_HTTP_TOKEN

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 어제 변경됐고, 최신 버전(0.1.4)은 4일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 MCPB도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Stripe MCP, flightclaw, Trade It, Vaaya, idealo MCP Server

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Stripe MCP

MCP server integrating with Stripe - tools for customers, products, payments, and more.

제작자: stripe널리 사용됨★ 2.1천13개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · stripe.com

flightclaw

Search ~300 airlines and book flights with a checkout link. OAuth sign-in by email code.

제작자: flightclaw성장 중★ 852개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · flightclaw.com

Trade It

Connect brokerage accounts to AI assistants: holdings, orders, asset lookup, and approved trading.

제작자: trade-it-inc초기★ 6231일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · tradeit.app

Vaaya

Paid APIs and tokenized shares for agents. Prepaid funding, including authorized Instinct checkout.

제작자: vaaya-ai초기↓ 123/주★ 442개월 전 업데이트

컴퓨터 또는 클라우드✓ 서비스 회사 · vaaya.ai

idealo MCP Server

Search products, compare prices and discover deals across 6 European markets with your AI assistant.

제작자: idealo초기★ 286개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · mcp.idealo.com
비슷한 항목과 비교
이 항목
Domain and Certificate Tracker MCP
Stripe MCPflightclawTrade ItVaayaidealo MCP Server
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드 또는 컴퓨터 설치 모두 가능클라우드에서 동작, 설치 불필요
키 필요예아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요예아니요아니요아니요아니요
기본 점검2/34/44/44/45/54/4
라이선스NOASSERTIONMITMITCC0-1.0MITMIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Domain and Certificate Tracker + AI - for ChatGPT, Claude, GitHub Copilot, Microsoft 365 Copilot, Gemini, and any agent that speaks MCP

Published by Servosity Inc. for MSP partners. Servosity is a trademark of

Servosity Inc. Apache-2.0 licensed. A first-party Claude Code Skill and MCP server

that reads public RDAP, Certificate Transparency (crt.sh), DNS and TLS; not

affiliated with any registry, registrar or CA.

▶ Watch the 30-second demo - demo data is simulated; every command shown exists in the real CLI.

Every client's domains and certificates in one inventory: what expires, unlocks or changes. Works with the AI you already use - ChatGPT (Plus/Pro+), Claude Desktop, Codex, Claude Code, Claude Cowork, and GitHub Copilot - plus Microsoft 365 Copilot / Copilot Studio and Google Gemini via the remote path. Free, open source, runs on your laptop. Built for MSP owners. No code required.

Works with your agent

The six agents MSP owners actually use (self-serve, works today):

Your AI agentHow to install the domain-cert-tracker skill
Claude DesktopRun installer, then Settings > Extensions to register domain-cert-tracker-mcp (no JSON editing).
ChatGPT (paid plans)Run installer, host domain-cert-tracker-mcp over HTTPS with DOMAIN_CERT_TRACKER_MCP_HTTP_TOKEN set, then register it as a Developer Mode connector if your connector settings can send the bearer token.
Codex CLIPaste the install prompt below.
Claude CodePaste the install prompt below.
Claude CoworkPaste the install prompt below.
GitHub Copilot (VS Code)Run installer, add domain-cert-tracker-mcp to mcp.json under the servers key, then pick Agent mode.

For ChatGPT, run domain-cert-tracker-mcp --transport http with DOMAIN_CERT_TRACKER_MCP_HTTP_TOKEN set, on an HTTPS host; every request sends that token. See mcp-install.md.

Also for the Microsoft and Google stacks

Big install base, but an honest heads-up: these are the remote / enterprise path, not the local binary you just installed.

AgentWhat it takes
Microsoft 365 Copilot / Copilot StudioNot self-serve. Host domain-cert-tracker-mcp over HTTPS with DOMAIN_CERT_TRACKER_MCP_HTTP_TOKEN set, then wire it into Copilot Studio (Tools > Add a tool > Model Context Protocol > Server URL) or a declarative agent, if it can send the bearer token. Needs a Copilot Studio license + tenant admin. See mcp-install.md.
Google GeminiGemini CLI is local - same as Claude Code. The Gemini app is remote - same HTTPS path as ChatGPT. See mcp-install.md.

Skill-native agents (also covered): Hermes and OpenClaw read this skill's SKILL.md directly *and* speak MCP - see their install sections below. Also works with Cursor, Windsurf, Cline, Continue.dev, and Zed via MCP. Full per-tool wire-up: [docs/which-agent.md](../../docs/which-agent.md).

Run more than one agent? Install across all 51+ supported agents in one command: npx skills add Servosity/msp-skills@latest (requires Node.js, then run the per-skill installer for the CLI/MCP binaries). See docs/which-agent.md.

Install in 60 seconds

Fastest for Claude Desktop - one-click .mcpb

Download the Domain and Certificate Tracker MCP (.mcpb) - then open Claude Desktop > Settings > Extensions and select the file. One click, no JSON, no shell. (Browse every domain-cert-tracker release on the releases page.)

Prefer the Claude Code plugin? Add the marketplace once, then install - works immediately, no directory listing required:

/plugin marketplace add Servosity/msp-skills

/plugin install domain-cert-tracker@msp-skills

Path A - paste one prompt into your AI agent (recommended)

Copy this into Claude Code, Codex CLI, or Claude Cowork:

Install the domain-cert-tracker Skill and MCP server from Servosity/msp-skills in this agent workspace. If this workspace uses a POSIX shell (macOS, Linux, WSL, or Bash), run bash <(curl -fsSL https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/domain-cert-tracker/install.sh). If it uses Windows PowerShell, run iwr -useb https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/domain-cert-tracker/install.ps1 | iex. No credentials are needed; run domain-cert-tracker-cli --help to explore.

The same prompt works in any agent that can run shell.

Path B - run the installer yourself

Windows (PowerShell):

iwr -useb https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/domain-cert-tracker/install.ps1 | iex

macOS / Linux:

bash <(curl -fsSL https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/domain-cert-tracker/install.sh)

The installer drops both domain-cert-tracker-cli (the CLI) and domain-cert-tracker-mcp (the MCP server) into your user bin path. Claude Code, Codex, and Cowork discover the Skill via SKILL.md in this directory.

Verify:

domain-cert-tracker-cli --version
Upgrade to the latest version

The installer always fetches the current release - re-run it to upgrade:

macOS / Linux:

bash <(curl -fsSL https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/domain-cert-tracker/install.sh)

Windows (PowerShell):

iwr -useb https://raw.githubusercontent.com/Servosity/msp-skills/main/skills/domain-cert-tracker/install.ps1 | iex

Claude Desktop .mcpb users: download the latest .mcpb (top of this section) and re-select it in Settings > Extensions. Claude Code plugin users: /plugin update domain-cert-tracker@msp-skills.

Add to Claude Desktop, GitHub Copilot, Gemini CLI, Microsoft 365 Copilot, or another MCP client

After the installer runs, see [mcp-install.md](./mcp-install.md) and [docs/which-agent.md](../../docs/which-agent.md) for the per-agent wire-up - one section per agent, including the GitHub Copilot servers key and the remote Microsoft 365 Copilot / Copilot Studio path. Claude Desktop's Settings > Extensions panel is the simplest path; the MCP config block (for users who prefer editing JSON) is documented in mcp-install.md.

Install for Hermes

From the Hermes CLI:

hermes skills install servosity/msp-skills/skills/domain-cert-tracker --force

Inside a Hermes chat session:

/skills install servosity/msp-skills/skills/domain-cert-tracker --force

Hermes speaks MCP natively, so it can also use the domain-cert-tracker-mcp server directly - same install path, same env vars.

Install for OpenClaw

Tell your OpenClaw agent (copy this):

Install the domain-cert-tracker skill from https://github.com/servosity/msp-skills/tree/main/skills/domain-cert-tracker. The skill defines how its required CLI (domain-cert-tracker-cli) can be installed via the openclaw: frontmatter block.

OpenClaw isn't generally available yet; the frontmatter wiring is pre-shipped and will activate the moment OpenClaw launches.

Authenticate

Nothing to set up: every source this skill reads is public, so there is no account, API key or token. The only optional variable is DOMAIN_CERT_TRACKER_MCP_HTTP_TOKEN, which protects the MCP server's HTTP mode (see mcp-install.md).

What this skill does

Question your MSP keeps askingCommand
What expires within 30 days, is not transfer-locked or changed, per client?domain-cert-tracker-cli report --days 30 --agent
Which hosts still serve an old certificate after a newer one was logged?domain-cert-tracker-cli renewals --agent
Which new certificates came from an issuer the domain's CAA does not permit, or a first-ever issuer?domain-cert-tracker-cli issuers audit --days 7 --agent
Which hostnames have certificates in CT but are not in the client's inventory?domain-cert-tracker-cli hosts discover --agent
What changed since the agent last looked, once per event?domain-cert-tracker-cli events list --since 0 --agent
What certificate does this host serve right now?domain-cert-tracker-cli tls probe www.example.com --agent
Who is the registrar, when does the domain expire, is it locked?domain-cert-tracker-cli domain example.com --json

Start with domain-cert-tracker-cli clients set "Acme Dental" --domain example.com --host www.example.com --yes, then domain-cert-tracker-cli sweep --agent (or schedule it daily); every question above except tls probe (a live handshake) then reads the local store.

Full command reference: guide.md. For the AI-agent operating contract (--agent, --dry-run, when to confirm before mutating), see AGENTS.md.

What makes this different

Most domain and certificate MCP servers answer one lookup at a time: one RDAP query, one crt.sh search, one TLS handshake. That's fine for one domain. It dies at scale, when you're asking "which of my 40 clients' certificates were renewed but never deployed?"

This skill keeps a per-client inventory and a local SQLite history. sweep checks registrations, Certificate Transparency, live TLS and DNS for every inventoried domain and host, stores each result and records what changed as typed events. renewals joins each host's served certificate with the same-CA certificates logged in CT; issuers audit judges each certificate name against the CAA that applies to it; report puts expiry, lock, CT and DNS changes per client on one page - work a stateless lookup tool can't do.

The pain this closes

Certificate lifetimes are shrinking: CA/Browser Forum ballot SC-081v3 cuts them to 200 days from March 2026, 100 days from March 2027 and 47 days from March 2029. Renewal becomes a monthly automated job across every client, and automation fails quietly: a renewed certificate that never reached the server, a certificate nobody ordered, a registration that lost its lock. MSPs still ask for a free SSL expiration tracker that makes sense on r/msp.

  • domain-cert-tracker-cli report --days 30 --agent - what expires, unlocked or changed, per client.
  • domain-cert-tracker-cli renewals --agent - renewals issued but never deployed.
  • domain-cert-tracker-cli issuers audit --days 7 --agent - certificates from an unexpected issuer.
  • domain-cert-tracker-cli events list --since 0 --agent - each change once, ready for a ticket.

See pain-point.md for the longer narrative.

Frequently asked questions

Does this work with ChatGPT?

Yes, on Plus, Pro, Team, Business, Enterprise, and Education plans (Free tier does not yet expose Developer Mode). ChatGPT connects to remote MCP servers over HTTPS, not local stdio binaries. The domain-cert-tracker MCP server runs locally over stdio by default. Its HTTP mode (`

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요