프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.프로토타입 · 30분마다 업데이트
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

mcp-airlock

제작자: Shalimov04버전 0.2.0i★ 15i내 컴퓨터에서 실행저장소 ↗
레지스트리 이름io.github.Shalimov04/mcp-airlock

설치 방법

What it does

Governance proxy for MCP servers: allowlist, forced dry run, human confirmation, blast radius, audit

  • Connects 내 컴퓨터에서 실행
  • Account or key Needs AIRLOCK_JWT_SECRET, AIRLOCK_SECRET
  • Category 기타

이 순위인 이유

목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다

인기14/80GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20
최신성12/1230일 안에 릴리스나 코드 변경이 있으면 만점
응답 중0/8마지막 점검 때 클라우드 엔드포인트가 응답
사용 점수26/100

품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

한 문장으로 AI에게 설치 맡기기

mcp-airlock 설치해 줘. https://mcp.popnx.com/i/shalimov04-mcp-airlock.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.

내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기

검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 13일

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있지만 먼저 준비가 필요해요

mcp-airlock 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요

AI에게 설치 맡기기

이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude에 MCP server mcp-airlock을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "airlock": { "command": "uvx", "args": [ "mcp-airlock", "--policy", "--upstream", "--env", "prod" ], "env": { "AIRLOCK_JWT_SECRET": "your-value", "AIRLOCK_SECRET": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) AIRLOCK_JWT_SECRET, AIRLOCK_SECRET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 mcp-airlock의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. mcp-airlock에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 컴퓨터용 Claude 앱 설정 파일 열기

    SettingsDeveloperEdit Config

  4. 이 설정을 붙여 넣고 저장

    {
      "mcpServers": {
        "airlock": {
          "command": "uvx",
          "args": [
            "mcp-airlock",
            "--policy",
            "--upstream",
            "--env",
            "prod"
          ],
          "env": {
            "AIRLOCK_JWT_SECRET": "your-value",
            "AIRLOCK_SECRET": "your-value"
          }
        }
      }
    }

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Claude를 끄고 다시 열기

  6. 해 보기

    mcp-airlock을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 mcp-airlock을 쓰고 있다고 하거나 답에 mcp-airlock 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 mcp-airlock에 연결할 수 없어요

mcp-airlock는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요

대신 이렇게 할 수 있어요

A · mcp-airlock에 연결되는 앱 쓰기

  • mcp-airlock 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
  • mcp-airlock 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)
  • mcp-airlock 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 한 번에 설치하는 버튼이 없어요. 설정을 붙여 넣고 값을 직접 채우세요
  • mcp-airlock 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 한 번에 설치하는 버튼이 없어요. 설정을 붙여 넣고 값을 직접 채우세요

B · 기타에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있지만 먼저 준비가 필요해요

mcp-airlock 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만)

AI에게 설치 맡기기

이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Claude Code에 MCP server mcp-airlock을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user airlock --env AIRLOCK_JWT_SECRET=your-value --env AIRLOCK_SECRET=your-value -- uvx mcp-airlock --policy --upstream --env prod 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) AIRLOCK_JWT_SECRET, AIRLOCK_SECRET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 mcp-airlock의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. mcp-airlock에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  4. 이 명령을 붙여 넣고 Enter

    claude mcp add --scope user airlock --env AIRLOCK_JWT_SECRET=your-value --env AIRLOCK_SECRET=your-value -- uvx mcp-airlock --policy --upstream --env prod

    Enter 전에 “your-value”를 내 키로 바꾸세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Claude Code에서 /mcp 입력

    mcp-airlock이 목록에 있고 연결됨으로 보이면 돼요

  6. 해 보기

    mcp-airlock을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 mcp-airlock을 쓰고 있다고 하거나 답에 mcp-airlock 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있지만 먼저 준비가 필요해요

mcp-airlock 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 한 번에 설치하는 버튼이 없어요. 설정을 붙여 넣고 값을 직접 채우세요

AI에게 설치 맡기기

이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 Cursor에 MCP server mcp-airlock을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "airlock": { "command": "uvx", "args": [ "mcp-airlock", "--policy", "--upstream", "--env", "prod" ], "env": { "AIRLOCK_JWT_SECRET": "your-value", "AIRLOCK_SECRET": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) AIRLOCK_JWT_SECRET, AIRLOCK_SECRET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 mcp-airlock의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. mcp-airlock에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. Cursor의 MCP 설정 파일 열기

    ~/.cursor/mcp.json

    이 설정을 붙여 넣고 빈 값을 채운 뒤 저장

    {
      "mcpServers": {
        "airlock": {
          "command": "uvx",
          "args": [
            "mcp-airlock",
            "--policy",
            "--upstream",
            "--env",
            "prod"
          ],
          "env": {
            "AIRLOCK_JWT_SECRET": "your-value",
            "AIRLOCK_SECRET": "your-value"
          }
        }
      }
    }
  4. 키 입력

    mcp-airlock 설정에서 AIRLOCK_JWT_SECRET, AIRLOCK_SECRET가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. Cursor에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    mcp-airlock을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 mcp-airlock을 쓰고 있다고 하거나 답에 mcp-airlock 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있지만 먼저 준비가 필요해요

mcp-airlock 키가 필요해요 (제작자 사이트에서 만들기) · 먼저 컴퓨터에 Python (uv)를 설치하세요 (한 번만) · 한 번에 설치하는 버튼이 없어요. 설정을 붙여 넣고 값을 직접 채우세요

AI에게 설치 맡기기

이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.

이 컴퓨터의 VS Code에 MCP server mcp-airlock을 설치해 주세요. 순서대로: 1) uv --version로 uv가 있는지 확인. 없으면 https://docs.astral.sh/uv/getting-started/installation/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "airlock": { "type": "stdio", "command": "uvx", "args": [ "mcp-airlock", "--policy", "--upstream", "--env", "prod" ], "env": { "AIRLOCK_JWT_SECRET": "your-value", "AIRLOCK_SECRET": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) AIRLOCK_JWT_SECRET, AIRLOCK_SECRET에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 mcp-airlock의 도구가 실제로 보이는지 확인하세요.

이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.

  1. uv 설치 (아직 없다면)

    이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter

    uv --version
    • 버전 번호(예: uv …)가 나오면 설치된 것입니다. 이 단계는 건너뛰세요
    • "command not found"(Windows는 "is not recognized")가 나오면 아직 설치하지 않았거나, 방금 설치해서 터미널을 닫았다가 다시 열어야 합니다
    터미널 여는 법

    Mac: ⌘ + Space를 누르고 Terminal 입력 후 Enter

    Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"

    아직 설치하지 않았다면: uv에는 클릭형 설치 파일이 없습니다. uv 공식 페이지에서 내 시스템(macOS 또는 Windows)용 한 줄 명령을 복사해 터미널에 붙여 넣으세요 · Python을 따로 설치할 필요 없이 uv가 필요할 때 자동으로 내려받습니다

    uv 다운로드 페이지 열기 ↗

    설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: uv --version

    한 번 설치하면 uv가 필요한 모든 도구에서 쓸 수 있습니다

  2. mcp-airlock에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.

    키 받는 방법은 아래 제작자 README에 있어요

  3. VS Code의 MCP 설정 파일 열기

    MCP: Open User Configuration

    이 설정을 붙여 넣고 빈 값을 채운 뒤 저장

    {
      "servers": {
        "airlock": {
          "type": "stdio",
          "command": "uvx",
          "args": [
            "mcp-airlock",
            "--policy",
            "--upstream",
            "--env",
            "prod"
          ],
          "env": {
            "AIRLOCK_JWT_SECRET": "your-value",
            "AIRLOCK_SECRET": "your-value"
          }
        }
      }
    }
  4. 키 입력

    mcp-airlock 설정에서 AIRLOCK_JWT_SECRET, AIRLOCK_SECRET가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  5. VS Code에서 AI 채팅을 Agent 모드로 열기

  6. 해 보기

    mcp-airlock을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 mcp-airlock을 쓰고 있다고 하거나 답에 mcp-airlock 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? mcp-airlock을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

컴퓨터에 설치

Claude Code

claude mcp add --scope user airlock --env AIRLOCK_JWT_SECRET=your-value --env AIRLOCK_SECRET=your-value -- uvx mcp-airlock --policy --upstream --env prod

Claude Desktop (claude_desktop_config.json)

{
  "mcpServers": {
    "airlock": {
      "command": "uvx",
      "args": [
        "mcp-airlock",
        "--policy",
        "--upstream",
        "--env",
        "prod"
      ],
      "env": {
        "AIRLOCK_JWT_SECRET": "your-value",
        "AIRLOCK_SECRET": "your-value"
      }
    }
  }
}

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "airlock": {
      "command": "uvx",
      "args": [
        "mcp-airlock",
        "--policy",
        "--upstream",
        "--env",
        "prod"
      ],
      "env": {
        "AIRLOCK_JWT_SECRET": "your-value",
        "AIRLOCK_SECRET": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "airlock": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "mcp-airlock",
        "--policy",
        "--upstream",
        "--env",
        "prod"
      ],
      "env": {
        "AIRLOCK_JWT_SECRET": "your-value",
        "AIRLOCK_SECRET": "your-value"
      }
    }
  }
}

직접 입력할 값

  • AIRLOCK_JWT_SECRET 비밀 필수 env
    bearer 토큰 검증에 사용하는 HS256 비밀 키(OIDC를 사용하려면 AIRLOCK_JWKS_URL을 설정)
    영어 원문 보기HS256 secret for verifying bearer tokens (or set AIRLOCK_JWKS_URL for OIDC)
  • AIRLOCK_SECRET 비밀 필수 env
    확인 토큰 서명용 키. 레플리카를 두 개 이상 실행할 때 설정함.
    영어 원문 보기Key for signing confirmation tokens; set it when running more than one replica

설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

주간 다운로드i
33/주
연결 방식
내 컴퓨터에서 실행
전송 방식
streamable-http
최신 버전i
0.2.0
카테고리i
기타
레지스트리 공개i
2026년 9월 16일
코드 마지막 변경i
2026년 11월 7일
제작자
Shalimov04
패키지
pypi: mcp-airlock
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

내 컴퓨터에서 실행하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast

모든 앱과 장단점 →

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 Shalimov04 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 12일 전

  • ✓ 통과

    라이선스 있음

    MIT 사용

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

공개된 취약점 (OSV.dev)

OSV.dev에 mcp-airlock@0.2.0 항목이 없습니다

이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 15일

우리가 확인하는 것 → · JSON

제작자: 재확인 요청 또는 잘못된 정보 신고
제작자용: README에 배지 달기

제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.

[![Featured on PopNx MCP](https://mcp.popnx.com/badge/shalimov04-mcp-airlock.svg)](https://mcp.popnx.com/en/servers/shalimov04-mcp-airlock)

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

로그인하고 리뷰 쓰기

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 20653개 중 97%보다 스타가 많아요
  • 이 카테고리의 다른 서버 20653개 중 39%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 20653개 중 99%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

mcp-airlock, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: AIRLOCK_JWT_SECRET, AIRLOCK_SECRET

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 12일 전 변경됐고, 최신 버전(0.2.0)은 2개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu

비슷하게 동작하는 다른 것

같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

World Monitor

Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.

제작자: koala73널리 사용됨★ 9.1만3일 전 업데이트

클라우드에서 실행✓ 서비스 회사 · worldmonitor.app

openstatus

Manage monitors, status pages, incidents and maintenances in your openstatus workspace.

제작자: openstatusHQ널리 사용됨★ 9.3천2개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · openstatus.dev

Strata

MCP server for progressive tool usage at any scale (see https://klavis.ai)

제작자: Klavis-AI성장 중★ 5.8천14개월 전 업데이트

클라우드에서 실행저장소 보관됨✓ klavis.ai

Jitsu

Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.

제작자: jitsucom널리 사용됨★ 5.1천4개월 전 업데이트

클라우드에서 실행✓ 서비스 회사 · jitsu.com
비슷한 항목과 비교
이 항목
mcp-airlock
World MonitoropenstatusOh My Posh ValidatorStrataJitsu
실행 위치컴퓨터에 설치 필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요클라우드에서 동작, 설치 불필요
키 필요예아니요아니요아니요아니요아니요
Claude에서 +로 추가아니요아니요아니요아니요아니요아니요
기본 점검3/34/44/44/41/44/4
라이선스MITAGPL-3.0AGPL-3.0MITApache-2.0MIT
가격등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음등록 정보에 비용 없음

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

mcp-airlock

Краткий обзор по-русски

mcp-airlock is a proxy you put between an AI agent and an MCP server when the server can do things you don't want an agent doing on its own. It speaks the 2026-07-28 revision of the protocol (the stateless one: no session, no initialize, one POST per request) and adds the parts the protocol leaves to you: who is allowed to call what, dry runs by default, a human in the loop for dangerous calls, an audit trail and tracing.

It is deliberately small. There is no UI, no policy language beyond flat YAML, no MCP SDK of its own. The whole proxy is one Starlette app plus a few helper modules.

How a call goes through

The agent sends a normal tools/call to the proxy instead of the server. The proxy:

  1. Works out who is calling. That comes from a JWT (Authorization: Bearer) or, if you run it behind a gateway that already did the authentication, from an X-Airlock-Principal header. It is never taken from the request body. No principal, no call. A name that is blank or has whitespace around it is no principal either, from either source: trimmed, alice would be alice.
  2. Looks the tool up in the policy. Tools that are not listed are refused. Listed tools have a risk tier per environment, so the same delete_service can be free in dev and gated in prod.
  3. Depending on the tier:
  • L0 (read) goes straight through.
  • L1 (suggest) always goes through with dry_run: true, whatever the agent asked for.
  • L2 (confirm) goes through with dry_run: true first, and the result comes back to the agent as input_required with a description of what would happen and a signed requestState. When a person says yes, the agent repeats the call with that state and the proxy executes it for real, once. Repeating it again is refused.
  • L3 (auto) goes through as sent.
  1. Checks the blast radius: how many objects one call touches (the length of a list argument you name in the policy) and how many a principal has touched in the last hour or day.
  2. Forwards the call, cuts the response down to the output cap if it is too big, and marks anything in it that smells like a prompt injection. Marking only; it does not change what the agent gets to see.
  3. Writes two audit records, one before the upstream call and one after, whatever happened. The JSONL file gets each one before the proxy goes on; the Postgres table, when there is one, is written from a queue a moment later.

Refusals come back as tool results with isError: true, not as protocol errors, so the model sees why and can do something else. Every tools/call result, a pending one included, carries the verdict and the rule that produced it in _meta. The io.mcp-airlock/ keys there are the proxy's alone: any the upstream puts into a result, one of its content blocks, a tools/list answer or a tool in it are removed before the proxy adds its own, and any the client sends are removed before the call is forwarded.

The proxy accepts three methods: tools/call as above, tools/list and server/discover. A tools/list answer is cut down to the tools the policy lists for the caller (the number of hidden tools is in _meta["io.mcp-airlock/hidden_tools"]), then checked against the pins and scanned for injection phrases. Any other method is refused with METHOD_NOT_FOUND.

Protocol-level answers
  • Missing principal: HTTP 401 / -32011 (PRINCIPAL_REQUIRED) when there is no JWT and no trusted X-Airlock-Principal header.
  • Unproxied method: HTTP 404 / -32601 (METHOD_NOT_FOUND) for anything but tools/call, tools/list and server/discover. A legacy initialize has no _meta envelope and gets HTTP 400 / -32602 instead.
  • Order: protocol rejections (-32700, -32600, -32602, -32020, all HTTP 400, and -32601/404) are answered before the missing-principal 401, so an unauthenticated client can tell a malformed request from a refused one. These cover the 2026-07-28 _meta envelope and the Mcp-Method/Mcp-Name header checks.
  • Forwarded `requestState`: one without the al1. prefix is forwarded as upstream state, so a token that lost its al1. prefix is treated as a new call.

Installing

From PyPI, as a tool or a package:

uvx mcp-airlock --help

pip install mcp-airlock

Three features are extras, so the base install stays small:

ExtraBringsNeeded for
postgrespsycopg, psycopg-poolAIRLOCK_STORE_DSN, AIRLOCK_AUDIT_DSN, airlock-audit query --dsn
otlpthe OTLP HTTP span exporterOTEL_EXPORTER_OTLP_ENDPOINT, OTEL_EXPORTER_OTLP_TRACES_ENDPOINT
regexgoogle-re2a where rule with regex
uvx --from 'mcp-airlock[postgres,otlp,regex]' mcp-airlock ...

pip install 'mcp-airlock[postgres,otlp,regex]'

A DSN without the postgres extra stops the proxy at startup with that hint. An OTLP endpoint without the otlp extra is a startup warning (an error under --strict) and the proxy runs without exporting. A policy with a regex rule does not load without the regex extra and says to install it. google-re2 ships wheels for glibc 2.27+ Linux, macOS and Windows, but none for musl (Alpine).

The container image ghcr.io/shalimov04/mcp-airlock includes all three extras. It listens on 0.0.0.0:9000, runs as a non-root user and has /data as its working directory, so audit.jsonl lands there. The user is uid 65532, so a host directory bind-mounted at /data has to be writable by that uid (chown 65532 ./data), or the start stops with a Permission denied message for the audit file. Each release is tagged with its version and its major.minor (X.Y.Z and X.Y).

From a checkout, uv sync --all-extras installs everything including the test tools.

Running it

The released version, no clone needed:

AIRLOCK_TRUST_PRINCIPAL_HEADER=1 uvx mcp-airlock --policy policy.yaml --upstream http://127.0.0.1:8080/mcp --env prod

The same as a container:

docker run --rm -p 127.0.0.1:9000:9000 -e AIRLOCK_TRUST_PRINCIPAL_HEADER=1 \

-v $PWD/policy.yaml:/data/policy.yaml \ --add-host=host.docker.internal:host-gateway \ ghcr.io/shalimov04/mcp-airlock:0.4 --policy policy.yaml --upstream http://host.docker.internal:8080/mcp --env prod

AIRLOCK_TRUST_PRINCIPAL_HEADER=1 takes the caller from an X-Airlock-Principal: alice header, which is fine on a laptop; anywhere shared use a JWT instead (see Environment variables). With no identity set, every call is 401.

--add-host gives Docker Engine on Linux the host.docker.internal name that Docker Desktop provides by itself. The upstream has to listen on an address the container can reach, not only on 127.0.0.1, and a host firewall may need to allow traffic from docker0; --network host with --upstream http://127.0.0.1:8080/mcp sidesteps both.

The image has a HEALTHCHECK that asks http://127.0.0.1:9000/healthz with python every 30 seconds (the image has no curl), ignoring any HTTP_PROXY. If you pass --port, or a --host bound to a specific non-loopback address, override it with --health-cmd or a compose healthcheck:. Its --start-interval needs Docker Engine 25+ (older ones ignore it). Kubernetes ignores the check: point a liveness probe at /healthz and a readiness probe at /readyz, as the Helm chart does.

From a checkout:

uv sync --all-extras

uv run pytest uv run python demo.py

The demo starts a fake upstream with a handful of tools on port 9001 and the proxy on 9000, walks through the interesting cases (refused tool, forced dry run, confirmation, replay, blast radius, output cap, injection marking) and leaves the audit log and spans in examples/.

The short version, recorded against that same fake upstream. An agent tries to delete a production service, gets a dry run and a confirmation prompt instead, the confirmation works exactly once, and a poisoned read result comes back flagged:

docs/make_demo_gif.py re-records it (uv run --with pillow python docs/make_demo_gif.py).

docs/clients.md shows how to point Claude Code and Cursor at the proxy, what the agent sees when a call is refused or held for confirmation, and which clients have been tested with the confirmation prompt.

Against a real server:

uv run mcp-airlock --policy policy.example.yaml --env prod \

--upstream http://127.0.0.1:9001/mcp --audit audit.jsonl

There are ready-made policies for the GitHub, Grafana, Kubernetes and Postgres MCP servers in examples/policies/. They were written against the servers' source at a pinned commit, so check them against your actual server before trusting them:

uv run airlock-policy lint examples/policies/github.yaml

uv run airlock-policy diff examples/policies/github.yaml --upstream http://127.0.0.1:8080/mcp --env prod

lint needs no network. It reports a tool without tiers (no_tiers, an error), a write tool without a description (no_description), a count_arg that relies on the global blast radius (blast_radius_default), a where rule for an environment no tier mentions (where_env_unknown) and an environment no tool covers (env_unused); --env adds environments that must be covered. A policy without environment lints with the first --env (or AIRLOCK_ENV) as its environment, the way the proxy would run it; without either it is an error. diff and pin take --env, then AIRLOCK_ENV, then the policy's own environment. A policy that cannot be read or does not validate is ERROR invalid in all three commands, and an upstream that does not answer tools/list like an MCP server is ERROR upstream. diff asks the server itself (not the proxy, which hides unlisted tools) for tools/list and tells you which allowlisted tools the server no longer has (missing_upstream, an error), which L1/L2 tools have no dry_run argument (no_dry_run), which where rules name an argument that is not in the schema (where_unknown_arg) and which server tools the policy does not mention (not_allowlisted). With --pins it also checks the pins. Both exit 1 when any finding is an error.

In Kubernetes

There is a small Helm chart in charts/mcp-airlock/ (Deployment, Service, a ConfigMap for the policy, a Secret for the keys, probes on /healthz and /readyz, a hardened security context). There is no chart repository, so install it from a checkout:

helm install airlock charts/mcp-airlock \

--set upstream=http://my-mcp-server:8080/mcp --set environment=prod \ --set-file policy=policy.yaml

The values are documented in charts/mcp-airlock/values.yaml. The points that matter:

  • Identity. By default the chart creates a Secret with a random AIRLOCK_JWT_SECRET and keeps it across upgrades. Read it with kubectl get secret airlock-mcp-airlock -o jsonpath='{.data.AIRLOCK_JWT_SECRET}' | base64 -d and sign HS256 tokens with sub and exp. Anyone who can read Secrets in the namespace (or the Helm release Secrets) can mint any principal. For JWKS set env.AIRLOCK_JWKS_URL and env.AIRLOCK_JWT_AUDIENCE, and set generateJwtSecret=false so no unused secret is generated. For a trusted gateway header set generateJwtSecret=false and env.AIRLOCK_TRUST_PRINCIPAL_HEADER=1, and make sure only the gateway can reach the Service: the chart ships no NetworkPolicy.
  • Credentials go in `existingSecret`, never in `env`. That covers AIRLOCK_UPSTREAM_AUTH, `AIRLOCK_APPROV

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요