World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Validate S1000D data modules: XSD, BREX chain and reference resolution as one verification status.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 9/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 21/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
S1000D Verify (S1000D Stack) 설치해 줘. https://mcp.popnx.com/i/shuji-bonji-s1000d-verify-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 17일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server S1000D Verify (S1000D Stack)을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "s1000d-verify": { "command": "npx", "args": [ "-y", "@shuji-bonji/s1000d-verify-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 S1000D Verify (S1000D Stack)의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"s1000d-verify": {
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-verify-mcp"
]
}
}
}S1000D Verify (S1000D Stack)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 S1000D Verify (S1000D Stack)을 쓰고 있다고 하거나 답에 S1000D Verify (S1000D Stack) 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 S1000D Verify (S1000D Stack)에 연결할 수 없어요
S1000D Verify (S1000D Stack)는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · S1000D Verify (S1000D Stack)에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server S1000D Verify (S1000D Stack)을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user s1000d-verify -- npx -y @shuji-bonji/s1000d-verify-mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 S1000D Verify (S1000D Stack)의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user s1000d-verify -- npx -y @shuji-bonji/s1000d-verify-mcpS1000D Verify (S1000D Stack)이 목록에 있고 연결됨으로 보이면 돼요
S1000D Verify (S1000D Stack)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 S1000D Verify (S1000D Stack)을 쓰고 있다고 하거나 답에 S1000D Verify (S1000D Stack) 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server S1000D Verify (S1000D Stack)을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "s1000d-verify": { "command": "npx", "args": [ "-y", "@shuji-bonji/s1000d-verify-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 S1000D Verify (S1000D Stack)의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
S1000D Verify (S1000D Stack)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 S1000D Verify (S1000D Stack)을 쓰고 있다고 하거나 답에 S1000D Verify (S1000D Stack) 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server S1000D Verify (S1000D Stack)을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "s1000d-verify": { "type": "stdio", "command": "npx", "args": [ "-y", "@shuji-bonji/s1000d-verify-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 S1000D Verify (S1000D Stack)의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
S1000D Verify (S1000D Stack)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 S1000D Verify (S1000D Stack)을 쓰고 있다고 하거나 답에 S1000D Verify (S1000D Stack) 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Claude Code
claude mcp add --scope user s1000d-verify -- npx -y @shuji-bonji/s1000d-verify-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"s1000d-verify": {
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-verify-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"s1000d-verify": {
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-verify-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"s1000d-verify": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-verify-mcp"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
레지스트리 이름이 GitHub 계정 shuji-bonji 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 그저께
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
아직 확인하지 않았습니다
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/shuji-bonji-s1000d-verify-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 그저께 변경됐고, 최신 버전(0.8.1)은 그저께 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 S1000D Verify (S1000D Stack) | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
English | 日本語
An MCP server that lets an LLM know, with evidence, how far an S1000D® data module has been checked. It performs three steps — validation against the XML schema (XSD), a check against BREX (Business Rules Exchange), and resolution of references (dmRef, pmRef, ICN, internalRef and applicRefId) — and returns the results combined into a single verification status (verification). This verification status has the same shape as the one s1000d-reader-mcp embeds in its content responses.
[!IMPORTANT]
This is a personal project and is not affiliated with ASD (Aerospace, Security and Defence Industries Association of Europe). S1000D® is a registered trademark of ASD.
The S1000D specification, XML schemas, default BREX and official samples are not included in any package or repository, because their terms of use do not grant redistribution. To run XSD validation and checks against the default BREX, obtain them from s1000d.org yourself and point the
S1000D_SPEC_DIRenvironment variable at the extracted folder.
| Tool | Description |
|---|---|
verify_data_module | Validates one data module in the order well-formedness → XSD → BREX chain → references, and returns verification (the verification status) together with the details of each step (line numbers of XSD violations, locations of BREX violations, unresolved references and their reasons) |
validate_schema | Runs XSD validation only. The XSD to use is chosen from the file name in xsi:noNamespaceSchemaLocation and looked up under xml_schema_flat/ below S1000D_SPEC_DIR. The issue is read from the Issue number: line at the top of brex.xsd |
check_references | Collects references of 5 kinds (dmRef / pmRef / ICN / internalRef / applicRefId) and returns whether each target exists, with a reason. A dmRef to a chapter of the specification (model identification code S1000D) is not a broken reference, so it is reported separately |
verify_csdb | Validates the CSDB objects in a folder (DMC and PMC by default) in one run, and returns the verification status of each object and a count summary. Read the results in parts with offset / limit, and write the details to JSON with reportPath |
suggest_fixes | Runs the same verification as verify_data_module and returns fix candidates for each finding. The server decides the candidates and adds their origin (BREX rule ID, XSD definition, CSDB, ids in the document, ACT/CCT/PCT) and their certainty (exact / several / none). If product is given, applicability that cannot be decided because the product lacks a value also gets candidate values. It does not apply fixes |
reconcile_dml | Reconciles a data module list (DML) or a data dispatch note (DDN) with the CSDB. For each DML entry (dmRef / pmRef / infoEntityRef / dmlRef) and each DDN delivery item (dispatchFileName) it returns found / issue-mismatch (the object exists but not the listed issue; the latest issue in the CSDB is given) / not-found / not-checked (commentRef), plus the DMs and PMs that are in the CSDB but not listed in the DML (notListed). Omit both path and xml to reconcile every DML and DDN in the CSDB. dmlType / dmlEntryType / issueType are not interpreted |
list_schemas | Returns the list of xml_schema_flat/ folders found under S1000D_SPEC_DIR (issue, number of XSDs, schema names). Use it to investigate the cause of schema-not-found |
verification)| Field | Value | Meaning |
|---|---|---|
schema.state | valid / invalid / schema-not-found / not-run | XSD found and validated with 0 violations / violations found / XSD not found (reason in reason) / skipped with skip |
brex.state | passed / violations / incomplete / not-run | 0 violations in every layer / violations found / an unresolved BREX or a rule that cannot be evaluated / skipped |
references.state | resolved / unresolved / not-run | 0 unresolved / unresolved references found / skipped |
schema-not-found is not valid. It means that XSD validation did not run.
[!WARNING]
- It does not decide conformance to S1000D.
schema: validandbrex: passedmean only that no errors were found against the XSD and the BREX rules that a machine can check.nonContextRules(agreements written as prose) are returned asmanualChecks, and a person makes the judgement. A project's business rules document is outside the scope of every tool.
- It does not return explanations of BREX rules or the meaning of values. That is the job of
explain_brex/lookup_valueins1000d-brex-mcp. Severity level codes (brsl01tobrsl99) are returned as they are.
- It does not evaluate applicability (which product the content applies to).
check_referencesonly looks at whether the target ofapplicRefIdexists. The evaluation is done bys1000d-reader-mcp. The exception issuggest_fixeswithproduct, which reports only applicability that cannot be decided because the product lacks a value.
- It does not apply fixes to the document.
suggest_fixesonly returns candidates. Have the LLM choose among the candidates, and ask the user whenconfidenceisnone(theinstructionssay the same).
- It does not interpret DML values (
dmlType/dmlEntryType/issueType).reconcile_dmlcompares identifiers and issues only; it does not verify the content of the listed objects (useverify_csdbfor that).
[!NOTE]
In a document that violates the XSD, elements may be in positions that differ from the specification, so BREX violations can be reported falsely or hidden. When
schema.stateisinvalid, read the BREX results as a rough indication only (the response also says so in_notes).
| Environment variable | Description |
|---|---|
S1000D_SPEC_DIR | The folder where you extracted the S1000D distribution you obtained. The XSDs (xml_schema_flat/; extract the inner "XML Schema Package" zip beforehand) and the default BREX (DMC-S1000D-*-04-10-0301-00A-022A-D_*.XML) are looked up below this folder. The copies of the XSDs inside the data dictionary are not used (their imports are absolute URLs and cannot be resolved offline) |
S1000D_CSDB_DIR | The folder that holds the project's data modules. Several folders can be given, separated by : (; on Windows). The referenced DM, PM and ICN files and the BREX in the middle of the chain are looked up here |
Folders can also be given with the tool argument csdbDirs. When the argument is given, only those folders are used; S1000D_CSDB_DIR and csdbDirs in the config file are not used (they are not added together). Folders that do not exist are skipped and listed in _notes of the response. When none is left, the tool returns no-csdb (below).
An error that the caller can fix by changing an argument is not returned as a tool failure (isError) but in the same shape as s1000d-writer-mcp.
{ "error": { "code": "file-not-found", "path": "/path", "detail": "File not found: /path/to/DMC-….XML" } }
code | Meaning |
|---|---|
file-not-found | There is no file at the path given in the argument |
no-csdb | No CSDB folder exists (pass csdbDirs or set S1000D_CSDB_DIR) |
input-error | An argument is malformed, or a required argument is missing |
path names the argument to fix (/path, /csdbDirs and so on), not a file path.
If S1000D_SPEC_DIR / S1000D_CSDB_DIR are not set, the server reads the config file ~/.config/s1000d-stack/config.json (under XDG_CONFIG_HOME if it is set; S1000D_CONFIG changes the location). Claude Desktop does not pass environment variables to servers installed as plugins, and does not substitute ${VAR} written in the plugin's env. When you install the server as a plugin, write the folders here.
{
"specDir": "/path/to/s1000d/issue-7", "csdbDirs": ["/path/to/your/csdb"] }
Environment variables take precedence when they are set. Paths that start with ~/ are accepted. The config file is read again on every call, so the server does not need to be restarted after you edit it.
{
"mcpServers": { "s1000d-verify": { "command": "npx", "args": ["-y", "@shuji-bonji/s1000d-verify-mcp"], "env": { "S1000D_SPEC_DIR": "/path/to/s1000d/issue-7", "S1000D_CSDB_DIR": "/path/to/your/csdb" } } } }
The default is stdio. With --http the server starts over Streamable HTTP, so a CSDB product's server or a web application can call it over HTTP (the embedding foundation of stage 2.5).
npx -y @shuji-bonji/s1000d-verify-mcp --http # http://127.0.0.1:3000/mcp
npx -y @shuji-bonji/s1000d-verify-mcp --http --port 3102 --path /verify
| Argument | Default | Meaning |
|---|---|---|
--host | 127.0.0.1 | Address to bind to |
--port | 3000 | Port; 0 picks a free port |
--path | /mcp | Path of the MCP endpoint. GET /healthz returns the name and version |
--allowed-host | (see below) | Host names allowed in the Host header; comma-separated or repeated |
--allowed-origin | (see below) | Host names allowed in the Origin header |
When --host is a loopback address (127.0.0.1 / ::1 / localhost), Host and Origin are limited to localhost names (DNS rebinding protection). When bound to any other address they are not checked, so put the server behind the product's reverse proxy or authentication. Authentication, authorization and multi-tenancy are not part of this server. Environment variables and the config file work the same as with stdio.
All validation logic lives in the shared library @shuji-bonji/s1000d-core; this server holds only the interpretation of arguments and the shape of the responses. XSD validation uses libxml2-wasm (the WebAssembly build of libxml2), and each XSD is compiled once and reused, so the 106 official samples of Issue 7 are validated in under 0.5 seconds. The BREX check calls the same functions as s1000d-brex-mcp, so the results of the two servers match.
npm install
npm test # runs with self-made test data only npm run test:spec # uses the distribution you obtained (set the location with S1000D_SPEC_DIR; default ../../specs/s1000d/issue-7) npm run build && S1000D_SPEC_DIR=/path/to/issue-7 npm start # starts over stdio
MIT. S1000D® is a registered trademark of ASD. This software is not affiliated with ASD and does not include the specification, schemas or official samples.