World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Builds S1000D data modules from structured drafts, verifies them, applies only unambiguous fixes.
제작자가 쓴 원문
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 7/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 19/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
S1000D Writer (S1000D Stack) 설치해 줘. https://mcp.popnx.com/i/shuji-bonji-s1000d-writer-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 18일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server S1000D Writer (S1000D Stack)을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "s1000d-writer": { "command": "npx", "args": [ "-y", "@shuji-bonji/s1000d-writer-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 S1000D Writer (S1000D Stack)의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"s1000d-writer": {
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-writer-mcp"
]
}
}
}S1000D Writer (S1000D Stack)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 S1000D Writer (S1000D Stack)을 쓰고 있다고 하거나 답에 S1000D Writer (S1000D Stack) 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 S1000D Writer (S1000D Stack)에 연결할 수 없어요
S1000D Writer (S1000D Stack)는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · S1000D Writer (S1000D Stack)에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server S1000D Writer (S1000D Stack)을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user s1000d-writer -- npx -y @shuji-bonji/s1000d-writer-mcp 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 S1000D Writer (S1000D Stack)의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user s1000d-writer -- npx -y @shuji-bonji/s1000d-writer-mcpS1000D Writer (S1000D Stack)이 목록에 있고 연결됨으로 보이면 돼요
S1000D Writer (S1000D Stack)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 S1000D Writer (S1000D Stack)을 쓰고 있다고 하거나 답에 S1000D Writer (S1000D Stack) 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server S1000D Writer (S1000D Stack)을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "s1000d-writer": { "command": "npx", "args": [ "-y", "@shuji-bonji/s1000d-writer-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 S1000D Writer (S1000D Stack)의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
S1000D Writer (S1000D Stack)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 S1000D Writer (S1000D Stack)을 쓰고 있다고 하거나 답에 S1000D Writer (S1000D Stack) 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server S1000D Writer (S1000D Stack)을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "s1000d-writer": { "type": "stdio", "command": "npx", "args": [ "-y", "@shuji-bonji/s1000d-writer-mcp" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 S1000D Writer (S1000D Stack)의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
S1000D Writer (S1000D Stack)을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 S1000D Writer (S1000D Stack)을 쓰고 있다고 하거나 답에 S1000D Writer (S1000D Stack) 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Claude Code
claude mcp add --scope user s1000d-writer -- npx -y @shuji-bonji/s1000d-writer-mcpClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"s1000d-writer": {
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-writer-mcp"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"s1000d-writer": {
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-writer-mcp"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"s1000d-writer": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"@shuji-bonji/s1000d-writer-mcp"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검
레지스트리 이름이 GitHub 계정 shuji-bonji 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 그저께
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
아직 확인하지 않았습니다
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/shuji-bonji-s1000d-writer-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 그저께 변경됐고, 최신 버전(0.6.0)은 그저께 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 S1000D Writer (S1000D Stack) | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | MIT | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
English | 日本語
An MCP server that lets an LLM create S1000D® data modules without writing XML. The LLM passes a structured draft and numbering rules; the server builds the XML, verifies it against the XSD, the BREX and the references, and applies automatically only the fixes that have exactly one candidate (exact). A fix with several candidates is applied only from a selection, and a value outside the candidates is never accepted. By default nothing is written.
[!IMPORTANT]
This is a personal project and is not affiliated with ASD (Aerospace, Security and Defence Industries Association of Europe). S1000D® is a registered trademark of ASD.
The S1000D specification, XML schemas, default BREX and official samples are not included in any package or repository, because their terms of use do not grant redistribution. Obtain them from s1000d.org and point the
S1000D_SPEC_DIRenvironment variable at the extracted folder.
| Tool | Description |
|---|---|
build_data_module | Builds a data module from one draft (descript, proced, process, fault or PM) and numbering rules. The DMC, ICN and issue come from the ledger (ledger) and the CSDB, and the same sourceId always gets the same DMC. After building, it verifies the XSD, BREX and references, and applies only exact fixes, up to maxFixRounds rounds. The remaining fixes are returned in fixes[] with their candidates |
convert_manual | Converts an experiential manual (@shuji-bonji/experiential-manual-model) into one data module per topic plus a publication module. Descriptions, procedures and fault isolation map directly; a screen flow becomes one process data module plus one procedure per screen. References between DMs, the PM and ICNs are resolved on top of the CSDB overlaid with the DMs just built and the ICN originals found on disk. What the conversion cannot represent is returned in notRepresented as counts |
apply_fixes | Applies the fixes you chose from the candidates in fixes[]. A selection must be a copy of a candidate; a value outside the candidates, or one that does not fit a range, goes to rejected with a reason. It re-verifies after applying |
create_comment | Builds a comment data module (comment) and verifies it. The sequence number is the next one in the CSDB |
extract_segments | Takes the sentences a person reads out of a data module (titles, paragraphs, steps, warnings, table cells, figure captions) so they can be translated. Inline elements are replaced by {1}, {2} placeholders, and skeletonHash is returned |
apply_segments | Puts translated sentences back into the data module they were taken from. The DMC stays the same and only the language changes. It stops with skeleton-mismatch when the data module changed after extraction |
write: true does the server write DMC-….XML into the first folder of csdbDirs (or the first of S1000D_CSDB_DIR). With no destination it writes nothing and returns the reason (no-csdb-dir).write-conflict) unless overwrite: true is passed.schema-invalid) unless allowInvalid: true is passed. schema-not-found (no XSD available) is not a violation; the file is written as unverified.write: true, convert_manual also copies the original assets under their ICN file names.Only a fix whose confidence is exact and which has exactly one candidate is applied (for example, replacing a value when the BREX allows a single responsible company, or removing an element the BREX forbids). several (more than one candidate, or a value given as a range) and none are not applied and are returned in fixes[]. The user chooses, and the server never fixes with a value outside the candidates. Each applied fix is returned in appliedFixes[] with the values before and after.
verification)Every response carries the verification status of the XSD, the BREX and the references. A missing XSD is reported as schema-not-found and a skipped step as not-run; neither is valid. The server reports the result of verification only: it does not judge conformance to S1000D and does not interpret severity.
A mistake in the draft or the numbering rules is returned not as isError but as error: { code: "input-error", path, detail }. path is the location of the mistake (for example /body[1] or /allocation/rules/infoCodeByKind/proced). Fix it and call again.
[!WARNING]
- It does not accept XML written by an LLM. It builds only from a draft. The tools that take existing XML (
apply_fixes,extract_segments,apply_segments) do not change the structure of the document.
- It does not fix with a value outside the candidates. There is no entry point for writing a free value.
- It does not skip verification. A built XML is always verified before it is returned.
- It does not judge conformance to S1000D or interpret severity. Read the violations in
s1000d-verify-mcpand the explanation of BREX rules ins1000d-brex-mcp.
- It does not translate. It only takes sentences out and puts them back. The LLM or a person translates.
- It does not create illustrations or judge Simplified Technical English (STE). For an illustration it only allocates an ICN and inserts the reference.
- What a data module cannot represent, such as hotspot coordinates or part of
scopeRefsin an experiential manual, is reported innotRepresentedand never dropped silently.
-
convert_manualdoes not build the data module of a topic whoseprerequisiteslist an item without an identifier (natoStockNumberormanufacturerCode) or withoutquantity. That row ofdataModules[]carrieserror(input-error, with the path of the item); the other data modules are still built. S1000D requires an identifier and a quantity for each item, and leaving the item out would writenoSupplies, which reads as "nothing is required".
- It does not create an ACT, CCT or PCT. Applicability relies on the
applicof the draft and an existing applicability repository. When a draft given tobuild_data_modulehas noapplic, the server does not build it and returnsinput-error(pathis/applic). The server does not decide applicability, so give at leastapplic.displayText(convert_manualusesdefaultApplic, by default the display text "All", for topics withoutscopeRefs).
| Environment variable | Meaning |
|---|---|
S1000D_SPEC_DIR | The folder where you extracted the S1000D distribution you obtained. The XSDs (xml_schema_flat/) and the default BREX are searched under it |
S1000D_CSDB_DIR | The folder holding the project's data modules. Several can be given, separated by : (; on Windows). The BREX chain, reference targets and existing issues are searched here, and the first folder is the write destination |
You can also give folders with the tool argument csdbDirs (the first one is the write destination). When the argument is given, only those folders are used; S1000D_CSDB_DIR and csdbDirs in the config file are not used (they are not added together). Folders that do not exist are skipped and listed in _notes of the response. The first folder may not exist yet; it is created with write: true.
When S1000D_SPEC_DIR / S1000D_CSDB_DIR are not set, the server reads the config file ~/.config/s1000d-stack/config.json (under XDG_CONFIG_HOME if set; the location can be changed with S1000D_CONFIG). Claude Desktop does not pass environment variables to a server installed as a plugin, so write the settings here in that case.
{
"specDir": "/path/to/s1000d/issue-7", "csdbDirs": ["/path/to/your/csdb"] }
Environment variables take precedence when they are set. The config file is read again on every call.
{
"mcpServers": { "s1000d-writer": { "command": "npx", "args": ["-y", "@shuji-bonji/s1000d-writer-mcp"], "env": { "S1000D_SPEC_DIR": "/path/to/s1000d/issue-7", "S1000D_CSDB_DIR": "/path/to/your/csdb" } } } }
The default is stdio. With --http the server starts over Streamable HTTP.
npx -y @shuji-bonji/s1000d-writer-mcp --http # http://127.0.0.1:3000/mcp
npx -y @shuji-bonji/s1000d-writer-mcp --http --port 3102 --path /writer
| Argument | Default | Meaning |
|---|---|---|
--host | 127.0.0.1 | Address to bind to |
--port | 3000 | Port; 0 picks a free port |
--path | /mcp | Path of the MCP endpoint. GET /healthz returns the name and version |
--allowed-host | (see below) | Host names allowed in the Host header; comma-separated or repeated |
--allowed-origin | (see below) | Host names allowed in the Origin header |
When --host is a loopback address, Host and Origin are limited to localhost names (DNS rebinding protection). When bound to any other address they are not checked, so put the server behind the product's reverse proxy or authentication. Because this server can write files, do not expose it without authentication.
All building, verification, fixing, comment and segment code lives in the shared library @shuji-bonji/s1000d-core; this server holds only the interpretation of arguments, the shape of the responses and the conversion from a manual to drafts (src/convert/). The input schemas import the definitions of core's draft.schema.json. The conversion is also available as @shuji-bonji/s1000d-writer-mcp/convert.
npm install
npm test # runs on self-made test data only (tests/fixtures/) npm run test:spec # uses the distribution you obtained (location given by S1000D_SPEC_DIR; default ../../specs/s1000d/issue-7) npm run build && S1000D_SPEC_DIR=/path/to/issue-7 S1000D_CSDB_DIR=/path/to/csdb npm start # start over stdio
MIT. S1000D® is a registered trademark of ASD. This software is not affiliated with ASD and does not include the specification, schemas or official samples.