프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

SimFuse eSIM Storefront

제작자: simfuse.app버전 1.2.0i★ –i클라우드에서 실행
레지스트리 이름app.simfuse/esim-storefront

설치

개요

제작자가 쓴 설명(영어 원문)

Travel eSIMs for 200+ countries. Browse plans, price a multi-country trip, and open a checkout.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 온라인 쇼핑몰 및 결제

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://simfuse.app/agentic/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http esim-storefront https://simfuse.app/agentic/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "esim-storefront": {
      "url": "https://simfuse.app/agentic/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "esim-storefront": {
      "type": "http",
      "url": "https://simfuse.app/agentic/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://simfuse.app/agentic/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 8일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • plan-trip

    Answer "which eSIM should I buy for this trip?". Give it the stops, a country code and the days spent in each, and it compares one plan covering the whole route against one plan per country against a mix of the two, on live prices, then flags the cheapest option that covers every

  • list-destinations

    Find the countries SimFuse sells eSIMs for, with the cheapest plan price ("from" price) for each in the currency you ask for. Start here when someone names a place: it turns "Portugal" into the two-letter country code the other tools take, and shows what that destination starts a

  • list-regions

    Discover available eSIM regions, including worldwide scopes, with their canonical slugs, display names, member countries and starting prices. Only published regions with active displayed regional plans are listed. Pass a returned region slug to list-plans as region, not destinati

  • get-destination-info

    Details for one destination: its name and codes, region, how many eSIM plans are sold there, the cheapest and most expensive, the smallest and largest data bundles, and its storefront page. Takes a country name ("Japan") or two-letter code ("JP"). Use this to describe a destinati

  • list-plans

    Show the eSIM plans on sale for one country or region, or search the whole catalog, narrowing by data allowance, validity and price. Use destination with a country code from list-destinations, or region with a slug from list-regions; never both. Use it when the traveller wants to

  • get-plan

    Read everything about one eSIM plan by its id: data allowance, how long it stays valid, what happens after a fair-use cap, whether hotspot and top-ups are supported, the network it runs on, and the retail price in the currency you ask for. Use it to answer a specific question abo

  • build-plan

    Build an eSIM plan to the traveller's liking for one destination: how much data, for how many days, optionally which network it runs on and whether calls and texts are bundled. Returns the one real plan that matches, with its id and live price, never a made-up combination: a shap

  • get-plan-coverage

    List every country one eSIM plan works in, plus any country of its own region that it leaves out. Use it to answer "does this plan also cover Austria?" for a regional or worldwide plan, where the plan name says a region and the traveller needs the actual list. For a single-countr

  • check-coverage

    Answer "does this eSIM plan work in X?" for one destination, as a yes or no rather than a country list. Takes a plan id and a destination (a country name or two-letter code). Reports whether the destination is covered, and separately whether it is explicitly excluded from an othe

  • get-checkout-link

    Get the page where a person buys one specific eSIM plan, for an assistant to hand them a link. The page sells exactly this plan with Apple Pay, Google Pay and card, takes the email at payment, and sends the eSIM there. Nothing is charged or reserved by this call and the buyer nee

  • create-checkout-session

    Open a checkout session for one or more eSIM plans at frozen prices, using the plan ids that plan-trip, list-plans or get-plan returned. Use it once the traveller has chosen what to buy. It CHARGES NOTHING and reserves no stock: it prices the basket, freezes those prices until th

  • get-order-status

    Check an eSIM order after payment: whether it completed and whether its eSIMs have been provisioned yet. Identified by the order id together with the email that bought it, both of which are on the buyer's confirmation email. Provisioning usually finishes within a minute of paymen

  • get-esim-activation

    Fetch the installable eSIM(s) for a paid order: the QR code image, the LPA activation string, the SM-DP+ address and activation code for manual entry, one-tap install links for iPhone and Android, and a hosted install page to send the buyer. Identified by the order id together wi

  • check-esim-usage

    How much data an eSIM has used and how much is left, for one eSIM on a paid order. Identified by the order id and the email that bought it, plus the ICCID from get-order-status or get-esim-activation. Allowances are in megabytes. Readings are served from a cache refreshed every c

  • list-topup-options

    Data top-ups that can be added to an eSIM the buyer already has, narrowed to what its network will actually accept. Identified by the order id and the email that bought it, plus the ICCID. Read-only: a top-up is bought in the SimFuse app, not through this server, and the response

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 8일 점검

  • ! 주의

    제작자와 저장소 일치

    레지스트리에 소스 저장소가 없어서, 게시자(simfuse.app)와 코드를 맞춰 볼 수 없어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    101ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 15개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

온라인 쇼핑몰 및 결제 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 2550개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 2550개 중 94%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 2550개 중 52%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

SimFuse eSIM Storefront, 안전한가요?

해당하는 기본 점검 3개 중 2개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.2.0)은 오늘 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spree Commerce: open-source B2B and marketplace ecommerce, Stripe MCP, MCP Cn Commerce

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Stripe MCP

제작자: stripe

MCP server integrating with Stripe - tools for customers, products, payments, and more.

클라우드에서 실행★ 2,043MIT12개월 전 업데이트
설치

MCP Cn Commerce

제작자: TonyWang-hub

8 read-only MCP platform entries; support is operation-specific; merchant live acceptance pending

내 컴퓨터에서 실행★ 96MIT28일 전 업데이트
설치

제작자의 README

저장소에서 README를 찾지 못했어요

PopNx에게 묻기