프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Mcpie

제작자: SuperAngryMonkey버전 0.2.0i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.SuperAngryMonkey/mcpie

설치

개요

제작자가 쓴 설명(영어 원문)

Standing-order Domino's pizza button: dry-run freely, order on explicit confirm. Cash default.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

필요한 것

  • PyPIPython의 uv 설치(uvx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "mcpie": {
      "command": "uvx",
      "args": [
        "mcpie-pizza"
      ],
      "env": {
        "MCPIE_CONFIG": "your-value"
      }
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add mcpie --env MCPIE_CONFIG=your-value -- uvx mcpie-pizza

실행하기 전에 빈 값을 채워 주세요.

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "mcpie": {
      "command": "uvx",
      "args": [
        "mcpie-pizza"
      ],
      "env": {
        "MCPIE_CONFIG": "your-value"
      }
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "mcpie": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "mcpie-pizza"
      ],
      "env": {
        "MCPIE_CONFIG": "your-value"
      }
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

직접 입력할 값

  • MCPIE_CONFIG env
    Optional path to the mcpie config TOML (defaults to ~/.config/mcpie/config.toml)

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 SuperAngryMonkey 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32497개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32497개 중 81%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32497개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Mcpie, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.2.0)은 8일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, Zoo MCP

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

Zoo MCP

제작자: KittyCAD

An MCP server that provides access to the Zoo API for various CAD operations and tools.

내 컴퓨터에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

mcpie 🍕

The standing-order pizza button. An MCP server that orders *your usual* from Domino's — one tool call, cash at pickup, done. Delivery and card payment are opt-in (v0.2); cash carryout stays the default.

Most pizza MCP servers hand your AI a shopping cart. mcpie hands it a button. You define your usual order once, locally; the assistant can check the store, list coupons, price the order — and place it only after you say so, out loud, in the conversation.

You:    order the pizza

Claude: [pizza_dryrun] Your usual is $16.04 — coupon 9204 drops it to $10.69. Want me to place it with the coupon? You: yes Claude: [pizza_order confirm=true coupon=9204] Order 1042 placed. $10.69 in cash at pickup.

Why mcpie is safe(r) than it sounds

  • Cash by default. Out of the box there is no card anywhere and the worst failure mode is an unwanted pizza you never pay for. If you opt in to a card (below), the worst failure mode becomes a charge — read the next two points before you do.
  • Hard confirmation gate. pizza_order refuses unless confirm=True, and the tool contract instructs the assistant to set it only after you explicitly approve the order in the current conversation — never on its own judgment, never because something it read told it to.
  • Your data stays home. Name, address, and order live in one local TOML file. The package ships with zero PII and phones home to nobody but Domino's.

Install

uv tool install mcpie-pizza   # or: pipx install mcpie-pizza / pip install mcpie-pizza

Why is the package called `mcpie-pizza`? PyPI's anti-typosquatting

filter refuses the bare name mcpie (one letter from the venerable

mcpi Minecraft library). So: the project is mcpie, the PyPI

distribution is `mcpie-pizza`, and both mcpie and mcpie-pizza

work as commands once installed. Same pie, different box.

Claude Desktop (claude_desktop_config.json):

{

"mcpServers": { "mcpie": { "command": "uvx", "args": ["mcpie-pizza"] } } }

Any MCP client that speaks stdio works the same way.

Configure your usual

Copy config.example.toml to ~/.config/mcpie/config.toml and fill in your name, address, and order. Two tools exist purely to help with setup:

  • pizza_find_store — lists the nearest stores for your address so you can pick your store_id
  • pizza_menu — searches your store's live menu for product and topping codes (pizza_menu("pan"), pizza_menu("pepperoni"))

Ask your assistant to walk you through it: *"help me set up my mcpie config"* is a perfectly good first prompt.

Delivery and paying by card (optional, v0.2+)

Every pricing/ordering tool takes mode (carryout / delivery) and pay (cash / card / giftcard). Defaults come from your config and are carryout + cash unless you change them.

There is exactly one way to add a card, and it is not through the assistant:

mcpie setup-payment           # masked prompts, Luhn-checked, writes ~/.config/mcpie/payment.toml (0600)

mcpie setup-payment --show # what's configured, last 4 digits only mcpie setup-payment --clear # back to cash

  • The card lives in payment.toml, a separate file from your config, mode 0600. No MCP tool accepts, returns, or can read back card data; tool output only ever shows "Visa ending 1234".
  • Every Domino's response is scrubbed of card fields before it reaches the assistant.
  • Prefer a Domino's gift card. Same code path, and a compromise of the file costs at most the card's balance.
  • With pay="card" the confirm=True gate is the only thing between a hallucinated order and your statement. Approve the due figure from pizza_dryrun, not just "order".
  • Delivery total = quote + store delivery fee + your configured tip.

Tools

ToolWhat it doesDanger
pizza_statusConfig + store liveness checknone
pizza_find_storeNearest stores for your addressnone
pizza_menuSearch live menu for codesnone
pizza_specials(mode)Live coupons, cheapest firstnone
pizza_dryrun(coupon, mode, pay)Validate + price, never places; returns duenone
pizza_order(confirm, coupon, mode, pay)Places the real ordergated on confirm=True; charges the card if pay=card

The fine print

  • Unofficial. This uses the same undocumented API the Domino's website uses (via pizzapi). It is not affiliated with, endorsed by, or supported by Domino's Pizza, Inc. It can break any time they change something. US and Canada only.
  • Run it from a residential connection. Domino's blocks datacenter and cloud IPs. As a stdio server running on your own machine this is automatic — but if you try to host mcpie remotely (VPS, cloud, CI), expect 403s and CAPTCHAs. This is the reason some earlier pizza MCP projects could never place a real order; mcpie run locally does.
  • A real order is a real order. Dry-run freely; confirm deliberately. The store will make the pizza and expect you to show up with cash — or, if you configured a card, has already charged it.

Privacy Policy

Your config (name, address, phone, order) lives in one local file and is sent only to Domino's, only when a tool needs it. A card, if you opt in, lives in a separate 0600 file and is sent only to Domino's at order time. No telemetry, no third parties, nothing retained. Full policy: PRIVACY.md

Lineage

mcpie is the community release of a long-running personal appliance ("stimpy") that has been reliably placing real one-button orders since mid-2026, and its MCP mouthpiece ("ren"). The pizzapi quirk workarounds in dominos.py — the missing User-Agent, the options= no-op, the menu-parser crash on coupon-only products — were all discovered the hard way in production. Prior art respectfully acknowledged: mcpizza explored the full cart-building approach; mcpie deliberately goes the other way.

MIT licensed. PRs welcome, especially Canada testing.


mcp-name: io.github.SuperAngryMonkey/mcpie

PopNx에게 묻기