프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Governance Gateway

제작자: tanishq-ctrl버전 0.1.1i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.tanishq-ctrl/governance-gateway

설치

개요

제작자가 쓴 설명(영어 원문)

Deadline-aware governance for AI agents: PII scan always, safety check if it fits the deadline

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • PyPIPython의 uv 설치(uvx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "governance-gateway": {
      "command": "uvx",
      "args": [
        "governance-gateway"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add governance-gateway -- uvx governance-gateway

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "governance-gateway": {
      "command": "uvx",
      "args": [
        "governance-gateway"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "governance-gateway": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "governance-gateway"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 tanishq-ctrl 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 18334개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 18334개 중 78%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 18334개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Governance Gateway, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.1.1)은 11일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, ProAgentStore

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211그저께 업데이트
설치

ProAgentStore

제작자: ProAgentStore

MCP-first control plane for ProAgentStore agents and private instances.

클라우드에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

governance-gateway

Governance checks that an AI agent runs before it acts, built so they keep up with the agent instead of falling behind it.

Every request gets a format check and a personal-data (PII) scan, which never skip. A safety classifier, which flags toxic text and jailbreak attempts, is the slow, optional check: it runs only if a cheap screen finds the text suspicious and it can still finish before the request's deadline. Under load, a guardrail that checks everything falls behind and its checks finish after the agent has already acted; this one stays on time and never drops the privacy check.

It runs locally as an MCP server, so text never leaves your machine, and works with any MCP client: Claude Desktop, Claude Code, Cursor, VS Code, Gemini CLI and others. In Claude Code an optional hook makes the checks compulsory for every command, file write and web request the agent makes.

Install

With uv nothing needs installing in advance:

uvx governance-gateway --version

Or with pip: pip install governance-gateway, then run governance-gateway. Python 3.10 or later; the only dependency is the mcp package.

Add it to your AI tool

Claude Desktop: in claude_desktop_config.json (Settings > Developer > Edit Config):

{

"mcpServers": { "governance-gateway": { "command": "uvx", "args": ["governance-gateway"] } } }

Cursor: the same block in ~/.cursor/mcp.json (or .cursor/mcp.json in a project).

Gemini CLI: the same block in ~/.gemini/settings.json.

VS Code (Copilot agent mode): in .vscode/mcp.json:

{

"servers": { "governance-gateway": { "type": "stdio", "command": "uvx", "args": ["governance-gateway"] } } }

Claude Code:

claude mcp add governance-gateway -- uvx governance-gateway

If you installed with pip, use "command": "governance-gateway" and no args.

Tools

ToolWhat it does
check_message(text, deadline_ms=100)Runs the checks. Returns allow, redact (with the personal data masked) or block, the reasons, whether the screen and the classifier ran, and the timing. Never echoes the text back.
governance_status()Requests so far: verdicts, mean and 95th-percentile lag, share on time, share of classifier checks skipped or screened out.
recent_decisions(limit=20)The latest decisions: verdict, kinds of personal data found, timing. No text.
decision_matrix(...)For a pipeline's deadline, traffic shape, peak-hour factor, detector recall, target and cost share: whether checking everything is enough, adaptive checking is needed, or only more capacity helps.
simulate_load(load, deadline_ms, traffic, seconds)Races "check everything" against the deadline-aware guard on a simulated clock with measured check costs.

Resources: governance://status and governance://policy (which checks run, which are mandatory, and how the gateway decides). All tools are read-only.

Make the checks compulsory in Claude Code

An MCP tool is only called when the agent decides to call it. In Claude Code a PreToolUse hook can run the check before every action instead. The easiest way is the governance-guard plugin, which adds both the server and the hook:

/plugin marketplace add tanishq-ctrl/governance-gateway

/plugin install governance-guard@governance-gateway

Or add the hook yourself to ~/.claude/settings.json (or a project's .claude/settings.json):

{

"hooks": { "PreToolUse": [ { "matcher": "Bash|Write|Edit|MultiEdit|NotebookEdit|WebFetch", "hooks": [ { "type": "command", "command": "uvx", "args": ["--from", "governance-gateway", "governance-gateway-hook"], "timeout": 10, "onFailure": "block" } ] } ] } }

The hook sends the text of each action (the command, the file content, the URL) to the running gateway, with a budget of GSL_HOOK_DEADLINE_MS (default 200 ms):

  • harmful or malformed: the action is refused and the agent is told why;
  • personal data found: you are asked whether to allow it;
  • otherwise: nothing changes, and your normal permissions apply.

If the gateway is not running, the hook still runs the personal-data scan itself. If the check cannot run at all, the action is blocked (set GSL_FAIL_OPEN=1 to allow it instead). Addresses at GSL_ALLOW_EMAIL_DOMAINS (default anthropic.com, users.noreply.github.com, example.com) are ignored, so commit trailers pass.

Settings

OptionEnvironmentDefaultMeaning
--cascade on/offGSL_CASCADEonRun the suspicion screen before the classifier
--estimator p90/meanGSL_ESTIMATORp90How the classifier's cost is estimated from recent checks
--workers NGSL_GATEWAY_WORKERS1Workers serving the queue
--audit-log PATHGSL_AUDIT_LOGnoneAppend one JSON line per decision (no text)
--port NGSL_GATEWAY_PORT8737Local port for the hook (127.0.0.1 only)
--no-hook-endpointDo not open the local port

What it detects, and what it does not

  • Personal data: e-mail addresses, telephone numbers and US-style national ID numbers, by pattern. Names, postal addresses and other identifiers are not detected.
  • Harmful text: a TF-IDF and logistic-regression classifier trained on ToxicChat, real prompts to a public chatbot labelled by people. On held-out ToxicChat messages it catches about 6 in 10 harmful messages with a precision of about 0.78; it is a light first line of defence, not a complete safety system, and it was trained on English.
  • The screen passes on 95% of harmful messages in validation and sends about 31% of ordinary traffic to the classifier.

Use it alongside, not instead of, your organisation's own data-protection controls.

Background

The gateway comes from an MSc project that measured how far governance checks fall behind fast automated decisions as load grows. Checking everything collapses at full capacity: on real chatbot traffic it stopped meeting its target at 77% of capacity. The deadline rule held to 1.06, and the screen plus the deadline rule to 1.44, while keeping the privacy check on time.

Prabhu, T. S. (2026). *Quantifying "Governance Speed Lag" (GSL) in Agentic AI Ecosystems: A simulation-based framework for self-adaptive real-time data compliance.* MSc Data Science project, VIT.

Source and issues

https://github.com/tanishq-ctrl/governance-gateway

Licence

Code: MIT. The bundled models and workload data are derived from ToxicChat and are for non-commercial use only (CC BY-NC 4.0); see LICENSE-DATA.md.

PopNx에게 묻기