WorkFlow Companion

Name: WorkFlow Companion
Author: TeamDzX

제작자: TeamDzX버전 2.5.0i★ –i내 컴퓨터에서 실행

레지스트리 이름io.github.TeamDzX/workflow-companion

설치

개요

제작자가 쓴 설명(영어 원문)

Claude on Windows or Linux works in your WorkFlow tasks, notes and projects via your own iCloud.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

사용자 의견i아직 리뷰가 없어요리뷰는 다음 단계에서 계정 기능과 함께 열려요
우리의 기본 점검i1개 중 1개 통과공개된 정보로 점검했으며, 코드는 아직 스캔하지 않았어요
사용 정도i아직 측정 안 함★ –

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

연결 방식: 내 컴퓨터에서 실행
전송 방식: stdio
카테고리: 문서, 시트 및 사무 업무

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

기본 점검: 1개 중 1개 통과
내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

npmNode.js 설치(npx 명령어용)

어떤 앱을 쓰세요?

ClaudeClaude CodeCursorVS CodeChatGPT

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

제작자의 .mcpb 파일 다운로드

링크는 제작자의 파일로 바로 연결돼요. 우리가 보관하거나 다시 패키징하지 않아요. 파일을 열면 Claude Desktop이 설치해요.

터미널에서 이 명령어를 실행하세요

claude mcp add workflow-companion -- npx -y @opticell/workflow-companion

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "workflow-companion": {
      "command": "npx",
      "args": [
        "-y",
        "@opticell/workflow-companion"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "workflow-companion": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "@opticell/workflow-companion"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

✓ 통과
제작자와 저장소 일치
레지스트리 이름이 GitHub 계정 TeamDzX 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
… 아직 점검 안 함
계속 관리되고 있음
아직 GitHub에서 이 저장소를 읽어 오지 않았어요
… 아직 점검 안 함
라이선스 있음
아직 GitHub에서 이 저장소를 읽어 오지 않았어요
– 해당 없음
엔드포인트 응답
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
– 해당 없음
OAuth로 로그인
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
… 아직 점검 안 함
도구 설명에 숨겨진 지시 없음
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

문서, 시트 및 사무 업무 카테고리의 다른 서버와 비교i

이 카테고리의 다른 서버 2196개 중 0%보다 스타가 많아요
이 카테고리의 다른 서버 2196개 중 93%보다 최근에 레지스트리에 공개됐어요
기본 점검 결과가 이 카테고리의 다른 서버 2196개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

WorkFlow Companion, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(2.5.0)은 어제 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js, MCPB도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Agent-Native Calendar, Excel MCP Server, MCP Server for Excel

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Agent-Native Calendar

제작자: BuilderIO

Agent-Native Google Calendar - manage events, sync, and public booking

클라우드에서 실행★ 7,620MIT2개월 전 업데이트

설치

Excel MCP Server

제작자: haris-musa

Create and edit Excel files with AI: charts, PivotTables, formulas. No Excel needed.

내 컴퓨터에서 실행★ 4,276MIT6일 전 업데이트

설치

MCP Server for Excel

제작자: sbroenne

Excel automation for AI - Sheets, Power Query, DAX, VBA, Tables, Ranges and more. Windows only.

내 컴퓨터에서 실행★ 847MIT4일 전 업데이트

설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

WorkFlow Companion

This repository is WorkFlow Companion's home: the source (src/index.js,

MIT licensed), downloads (WorkFlow.mcpb for Claude Desktop) on the

Releases page,

and bugs and requests in Issues.

The package itself installs from npm. On a Mac, use the open-source

workflow-agent-bridge instead.

All of Opticell's free tools for Claude: opticell-mcp.

Lets Claude on Windows or Linux work in your WorkFlow tasks, notes and projects: reading the queue, replying in threads, ticking checklists, filing notes, updating documents. It works in Claude Code, Claude Desktop, or any MCP client.

Free. It needs WorkFlow 5.2 or later on an iPhone, iPad or Mac, which does the actual work. No Mac needed:

Claude ──MCP──▶ companion ──▶ your private iCloud ──▶ WorkFlow on your iPhone, iPad or Mac

◀── receipt + fresh snapshot

The companion never edits your WorkFlow data itself. It leaves commands in a zone of your own private iCloud database. WorkFlow applies them with the same checks as the app (read-only trial gate, email permission, the agent's signature) and lists every one in Command History. Nothing passes through Opticell's servers.

Which device answers. A Mac with WorkFlow open answers within seconds. An iPhone or iPad answers when iOS lets WorkFlow run: usually within minutes, sometimes only when you next open it, and not while WorkFlow has been swiped away in the app switcher. With both switched on, the Mac answers while it's awake and the iPhone stands by. Every command is applied exactly once, however many devices are on.

Install

One line installs Node.js if needed, signs this computer in, adds the companion to Claude Code and offers to let it start work on its own:

Windows (PowerShell):

irm https://raw.githubusercontent.com/TeamDzX/workflow-companion/main/install.ps1 | iex

Mac or Linux (Terminal):

curl -fsSL https://raw.githubusercontent.com/TeamDzX/workflow-companion/main/install.sh | sh

Switch the companion on in WorkFlow first (step 1 below). The steps that follow are what the installer does, if you'd rather do them by hand.

Set up

In WorkFlow on an iPhone or iPad: Settings → Windows Companion → Answer the Companion. On a Mac: Settings → Agent Bridge, then the Agent Bridge and Cloud Bridge switches.
Install Node.js 18 or later (LTS) if node -v doesn't show it: Windows winget install OpenJS.NodeJS.LTS -e, Mac brew install node, Linux your package manager, or the installer from https://nodejs.org. Then close and reopen the terminal (and restart Claude Code) so node and npx are found; otherwise you'll see "node is not recognized".
In a normal terminal window:

   npx -y @opticell/workflow-companion@latest setup

It opens https://companion.opticell-limited.com to sign in with the Apple Account WorkFlow uses on your iPhone or Mac, then asks you to paste the token that page shows. It asks questions, so it can't run from Claude Code's ! prompt or another non-interactive shell; there, pass --web-token and --name .

Add it to Claude:

   claude mcp add --scope user workflow -- npx -y @opticell/workflow-companion@latest

On Windows, npx is a script, so Claude Code needs cmd /c in front:

   claude mcp add --scope user workflow -- cmd /c npx -y @opticell/workflow-companion@latest

--scope user makes it available in every project on this computer.

Claude Desktop needs no terminal. Download WorkFlow.mcpb from the product page and double-click it. Then sign in at https://companion.opticell-limited.com and paste the token into Settings → Extensions → WorkFlow Companion → Sign-in token.

Check it any time with npx -y @opticell/workflow-companion status.

Its name

Setup asks what Claude on this computer should be called in WorkFlow ("Companion" unless you choose, e.g. --name Server). That name is how work reaches it rather than the Mac's own Claude:

Assign a task to it. WorkFlow offers the name once it has heard from the companion, and the Ask sheet lets you pick it.
Write `@Server` in a comment or a note. A mention in a *shared* project's thread doesn't count, because other people can write there.
What it writes is signed with its name, so a thread shows which Claude did what.
One name, one computer. Setup refuses a name another computer already answers to, and asks for another. Every command is checked the same way, which covers Claude Desktop, where the name is a setting. Use setup --takeover when this computer replaces the other one. A name frees up by itself once its computer has been silent for two weeks.
@Claude always means Claude on the Mac. A companion can't take that name, and mentions match whole words only, so @Claude2 never wakes the Mac.

Claude Desktop users set the name in the extension's settings.

Working on its own

With waking on, @Server from the app is enough: nobody has to be at this computer. Turn it on once Claude Code is installed and signed in here:

npx -y @opticell/workflow-companion wake-on

Every 2 minutes a hidden scheduled job (Task Scheduler on Windows, cron elsewhere) checks this name's queue in iCloud. That's one small call; the task list is downloaded only when it changed.
New work starts one Claude Code session (claude -p, no window). It reads the task, comments that it's picked it up (your phone shows "Server is on it"), does the work and replies in the thread.
What counts as new: a task newly assigned to the name, a new @Server comment from a person, a person's follow-up on an assigned task, or an edited note that mentions it. Its own replies never wake it.
Handled once. One session at a time; work already handled never starts another. A session that couldn't start at all (not signed in to Claude, a usage limit) is retried twice more, then says so in the thread.
A time limit, 45 minutes by default (--max-minutes). A session stopped by it says so in the thread.
What it may do. By default the WorkFlow tools (mcp__workflow), for reading tasks and replying, plus WebSearch and WebFetch, so it can research what you ask. Web pages it reads could try to mislead it, and a URL it fetches can carry text out; --no-web turns web access off, --web back on. Scheduled briefs, check-ins and the self-test never get it. To let it run commands on this computer, pass --allow-tools "mcp__workflow Bash Read" (any Claude Code permission rules). Anyone who can write @Server in your WorkFlow could then run commands here, so decide that deliberately. Shared projects never reach it.
Windows: a scheduled task normally runs only while the user is logged in. To run while logged off, change the task "WorkFlow Companion wake" to "Run whether user is logged on or not" in Task Scheduler.
--workdir sets the folder sessions start in (your home folder otherwise), --model the Claude model, --claude the path to Claude Code if it isn't found. --skip-existing treats what's already queued as handled.
The log is ~/.workflow-companion/wake.log. wake-off stops it all.

Staying up to date

Claude Code runs whatever its registration names. Register it with @latest (setup prints the exact line) and every new session uses the newest release.
The scheduled jobs (keep-alive, waking) run a saved copy that npm never touches, so they update themselves. At most every 6 hours they read npm's entry for the package (registry.npmjs.org/@opticell/workflow-companion/latest). When it's newer, they download the release, check it against npm's sha512 checksum and that Node can parse it, then swap it in. Turn this off with auto-update off, and update by hand with update.
Its version is reported. Every ten minutes or so while it runs, each companion writes its version, computer and check-in time to your iCloud. WorkFlow 5.3.2 shows them in Settings → Agent Bridge → Who's Bridged, and status lists every companion's version.

Commands


`workflow-companion`	Runs the MCP server. This is what Claude starts.
`workflow-companion setup`	Signs this computer in. Takes `--web-token` to skip the prompt.
`workflow-companion status`	Which device answers, how fresh the snapshot is, any receipts that arrived late.
`workflow-companion doctor`	Checks everything on this computer and says how to fix what's wrong. Start here when something isn't working.
`workflow-companion canary`	Runs the daily self-test now. `canary on\	off`,` canary at HH:MM`.
`workflow-companion keepalive`	Renews the sign-in. The scheduled job runs this.
`workflow-companion update`	Updates the scheduled jobs' copy to the latest release now, and shows how to keep Claude Code on `@latest`.
`workflow-companion auto-update on\	off`	Whether the scheduled jobs update themselves (on by default).
`workflow-companion wake-on`	Starts a Claude Code session on its own when work for its name arrives. See above.
`workflow-companion wake-off`	Stops that. Work waits until you ask Claude here.
`workflow-companion wake`	One check of the queue. The scheduled job runs this.
`workflow-companion monitor add\	list\	check\	remove`	Checks this computer runs without using Claude. See below.
`workflow-companion approvals on\	off`	Lets an assistant run one exact command after you reply "approve CODE" (off by default).
`workflow-companion inbox-on\	inbox-off`	Files dropped in a folder become tasks.
`workflow-companion notifications on\	off`	Notices on this computer (on by default). `notify-test` shows one.
`workflow-companion reports on\	off`	A short report attached to the task after each session (on by default).
`workflow-companion signout`	Deletes the sign-in, cached data and both scheduled jobs.

On this computer, by itself (1.8)

These run in the same 2-minute scheduled job as waking, and cost no Claude usage.

Monitors. Checks that wake Claude only when something changes:

workflow-companion monitor add --name site --http https://example.com --task "Server status" --wake

workflow-companion monitor add --name disk --disk C:\ --min-gb 20 --task "Server status" workflow-companion monitor add --name api --port 10.0.0.5:443 --every 2 workflow-companion monitor add --name backup --file D:\backups\latest.zip --task "Backups" workflow-companion monitor add --name nightly --command "check-backups.cmd" --task "Backups" --wake

A change (down, back up, the file changed) is posted on the task, shows a notification here, and with --wake starts a session about it. An assistant can set up website, port, disk, process and file monitors itself (workflow_monitor), but only you can add a command monitor, because it runs a command every few minutes.

Approvals. An assistant can ask to run one exact command on this computer (restart a service, install an update). It posts the command on the task with a code; reply approve K7Q2 (or decline K7Q2) from your phone. Only a person's reply counts, never another assistant's; tasks in shared projects ca

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요

WorkFlow Companion

개요

PopNx MCP의 세 기둥

할 수 있는 일

설치

설치하기 전에

할 수 있는 일

기본 점검i

제작자와 저장소 일치

계속 관리되고 있음

라이선스 있음

엔드포인트 응답

OAuth로 로그인

도구 설명에 숨겨진 지시 없음

문서, 시트 및 사무 업무 카테고리의 다른 서버와 비교i

자주 묻는 질문

대안

Agent-Native Calendar

Excel MCP Server

MCP Server for Excel

제작자의 README

WorkFlow Companion

Install

Set up

Its name

Working on its own

Staying up to date

Commands

On this computer, by itself (1.8)