프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

McpStamp Leave Tracker

제작자: theluckystrike버전 0.23.0i★ –i컴퓨터 또는 클라우드
레지스트리 이름io.github.theluckystrike/leave

설치

개요

제작자가 쓴 설명(영어 원문)

Employee leave and PTO: requests, approvals, balances, who is out, and conflict checks.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 컴퓨터 또는 클라우드
  • 전송 방식: stdio, Streamable HTTP
  • 카테고리: 기타
  • 입력해야 할 값: MCP_LICENSE_KEY

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

비밀로 표시된 값은 내 계정의 열쇠예요. 절대 다른 사람과 공유하거나 채팅에 붙여 넣지 마세요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://mcp.zovo.one/mcp/leave

제작자의 .mcpb 파일 다운로드

링크는 제작자의 파일로 바로 연결돼요. 우리가 보관하거나 다시 패키징하지 않아요. 파일을 열면 Claude Desktop이 설치해요.

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http leave https://mcp.zovo.one/mcp/leave

실행하기 전에 빈 값을 채워 주세요.

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "leave": {
      "url": "https://mcp.zovo.one/mcp/leave"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "leave": {
      "type": "http",
      "url": "https://mcp.zovo.one/mcp/leave"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://mcp.zovo.one/mcp/leave

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

직접 입력할 값

  • MCP_LICENSE_KEY 비밀 env
    Optional Pro license key (MCPL1....). Verified offline.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • leave_employee_add

    Add an employee to the leave tracker and return their EMP-NNNN id. Give their annual paid-leave allowance in whole days and any days carried over from last year. Balances charge approved plus pending leave against allowance + carried-over. Free tier: unlimited.

  • leave_request

    Create a leave or PTO request and return its LV-NNNN id. type is vacation, sick, unpaid or parental. start and end are inclusive YYYY-MM-DD dates; halfDay charges half a day for the whole span. A pending request is refussed if it would overlap another approved or pending request

  • leave_approve

    Approve a pending leave request by id. Also used to re-open a rejected one. Nothing to approve on an already-approved request.

  • leave_reject

    Reject or cancel a leave request by id. A pending or approved request becomes rejected; a rejected one can be reopened via leave_approve. Use leave_cancel (via reject with reason) for voluntary withdrawal.

  • leave_balance

    Show one employee's leave balance: allowance + carried-over, minus approved and pending, as whole days plus a possible half day. Remaining is rounded down to whole days on the report.

  • leave_out_range

    Who is out in a date range: start and end are inclusive YYYY-MM-DD. Each employee appears once per day; pending requests count as a plan. Use for coverage, calendars and absence summaries. Free tier: unlimited.

  • leave_list

    List all employees, or all leave requests (optionally filtered by employee and/or status). Omit the filter to list requests.

  • leave_import

    Pro. Bulk-create leave requests from a CSV/TSV. First row is a header: employee,type,start,end,halfDay,status,reason. status may be omitted (defaults to pending) or be approved/rejected. Each request is still checked for overlap conflicts; a conflicting row is reported, not appli

  • leave_export_ics

    Pro. Export all APPROVED leave as an .ics calendar (RFC5545). Returns the calendar text; pass path to also write it to a local file. watermark-free.

  • license_status

    Report this endpoint's licence state for your token as JSON: the product, the tier free or pro, why it is not Pro, and the checkout URL. Call it to explain a free-tier refusal. No arguments, nothing changes.

  • license_activate

    Turn Pro on for this connection with key, an MCPL1. . issued at checkout for this server or the bundle. Data under your token stays; a wrong or expired key changes nothing. license_status confirms it.

  • leave_cancel

    Cancel a pending or approved request by id, keeping its record with status cancelled. Differs from leave_reject in intent (voluntary withdrawal). Nothing happened if already cancelled.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 theluckystrike 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    35ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 12개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32683개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32683개 중 86%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32683개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

McpStamp Leave Tracker, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: MCP_LICENSE_KEY

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

둘 다 가능해요. 내 컴퓨터에 설치해도 되고, 클라우드 버전에 연결해도 돼요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.23.0)은 5일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, MCP Server Autocad Lisp Helper

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211그저께 업데이트
설치

MCP Server Autocad Lisp Helper

제작자: radwanalmsora

High-precision static analysis and debug server for AutoCAD AutoLISP (.lsp) files.

내 컴퓨터에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

mcp-leave

In the [official MCP Registry](https://registry.modelcontextprotocol.io/v0.1/servers/io.github.theluckystrike%2Fleave/versions/latest) (io.github.theluckystrike/leave). Employee leave/PTO tracking for solopreneurs and small studios: who is off, when, and how many days each person has left. Add employees with an annual allowance and any carried-over days, log vacation/sick/personal requests (including half-days), approve or reject them, and read balances, conflicts and who-is-out calendars directly from your MCP client - Claude Desktop, Cursor, or any MCP host.

Tools

  • "leave_employee_add" - add an employee with annualAllowance (and optional carriedOver).
  • "leave_request" - log a leave request (employee, type, start, end, optional halfDay, reason).
  • "leave_approve" / "leave_reject" - decide a request; decisions are recorded with dates.
  • "leave_cancel" - cancel a pending or approved request (keeps the audit trail).
  • "leave_balance" - allowance, carried, approved, pending, committed and remaining days per employee.
  • "leave_out_range" - who is out in a date range: day-by-day calendar rows plus person-days.
  • "leave_list" - all employees and requests, filterable by employee and status.
  • "leave_import" (Pro) - bulk-create requests from CSV; conflicting rows are rejected one by one, valid rows still apply.
  • "leave_export_ics" (Pro) - export approved leave as an RFC5545 .ics calendar.

The one rule that decides everything else

A day is committed when the request that spends it is approved or pending. Balance is allowance + carried − approved − pending. Cancelling returns the days immediately; rejecting never charged them.

Overlapping requests for the same person are refused at creation time - both pending and approved count - so the calendar never contains two requests claiming the same day.

Free vs Pro

The free tier is the full CRUD surface: employees, requests, approvals, balances, calendars - watermark-free, no request limits. Pro (an MCP_LICENSE_KEY, activate with "license_activate") adds bulk CSV import and ICS calendar export. Run "license_status" to see the current tier.

Quick start

{

"mcpServers": { "leave": { "command": "npx", "args": ["-y", "@theluckystrike/mcp-leave"] } } }

Data lives in a single JSON store (~/.mcp-leave/store.json, or $XDG_DATA_HOME/mcp-servers/leave/store.json when set), written atomically under a file lock, so two clients on one machine never interleave writes.

Use these docs as an MCP server

Any MCP client (Claude, Cursor, Windsurf, VS Code) can read this repository's documentation directly via GitMCP - no install:

  • Docs MCP URL: https://gitmcp.io/theluckystrike/mcp-leave
PopNx에게 묻기