프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. Google로 로그인하면 리뷰를 쓸 수 있어요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Task Board Todo Kanban

제작자: theluckystrike버전 0.23.2i★ 2 (저장소 전체의 별)i클라우드에서 실행
레지스트리 이름io.github.theluckystrike/task-board-todo-kanban

설치 방법

개요

제작자가 쓴 설명(영어 원문)

A todo and task board in kanban form, driven from chat with full CRUD.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 문서, 시트 및 사무 업무
  • 입력해야 할 값: Authorization

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

검사 4/4 통과 · 내가 묻는 내용은 제작자 서버(mcp.zovo.one)를 거쳐요

먼저: 어떤 AI를 쓰시나요?

쓰는 앱을 고르면 아래에 단계가 나옵니다.

Claude에 연결할 수 있어요 · 약 5분

Task Board Todo Kanban 키가 필요해요 (제작자 사이트에서 가입, 비용이 들 수 있음) · claude.ai나 데스크톱 앱에서 한 번 설정하면 채팅에서 쓸 수 있어요 · 무료 계정은 1개까지

  1. Task Board Todo Kanban에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 비용이 들 수 있어요.

    Task Board Todo Kanban 사이트 열기 ↗

  2. Claude의 Connectors 페이지 열기

    CustomizeConnectors

    CustomizeConnectors1+ Add2https://…3Add4
  3. “+ Add” → “Add custom connector”를 누르고 이 2칸 채우기

    여기서 복사해 Claude의 같은 이름 칸에 붙여 넣고 Continue를 누르세요

    Name · 이름Task Board Todo Kanban
    Remote MCP server URL · 주소https://mcp.zovo.one/mcp/task-board-todo-kanban

    Request headers에 이 이름과 값을 추가

    헤더 이름Authorization
    값Bearer <여기에 키 붙여 넣기>

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

    Authentication은 Claude가 찾은 그대로 두고 Add를 누르세요

  4. 채팅에서 켜기

    +ConnectorsTask Board Todo Kanban

  5. 해 보기

    Task Board Todo Kanban을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude가 Task Board Todo Kanban을 쓰고 있다고 하거나 답에 Task Board Todo Kanban 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

ChatGPT는 아직 Task Board Todo Kanban에 연결할 수 없어요

Task Board Todo Kanban는 연결할 때 내 키가 필요한데, OpenAI 도움말은 OAuth 로그인만 설명하고 우리가 확인한 키 입력 방법이 없어요

대신 이렇게 할 수 있어요

A · Task Board Todo Kanban에 연결되는 앱 쓰기

  • Task Board Todo Kanban 키가 필요해요 (제작자 사이트에서 가입, 비용이 들 수 있음) · claude.ai나 데스크톱 앱에서 한 번 설정하면 채팅에서 쓸 수 있어요 · 무료 계정은 1개까지
  • Task Board Todo Kanban 키가 필요해요 (제작자 사이트에서 가입, 비용이 들 수 있음)
  • Task Board Todo Kanban 키가 필요해요 (제작자 사이트에서 가입, 비용이 들 수 있음)
  • Task Board Todo Kanban 키가 필요해요 (제작자 사이트에서 가입, 비용이 들 수 있음)

B · 문서, 시트 및 사무 업무에서 ChatGPT에 연결되는 다른 서버

같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요

Claude Code에 연결할 수 있어요 · 약 5분

Task Board Todo Kanban 키가 필요해요 (제작자 사이트에서 가입, 비용이 들 수 있음)

  1. Task Board Todo Kanban에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 비용이 들 수 있어요.

    Task Board Todo Kanban 사이트 열기 ↗

  2. 터미널 열기

    Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기

  3. 이 명령을 붙여 넣고 Enter

    claude mcp add --transport http task-board-todo-kanban https://mcp.zovo.one/mcp/task-board-todo-kanban --header 'Authorization: your-value'

    Enter 전에 “your-value”를 내 키로 바꾸세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  4. Claude Code에서 /mcp 입력

    Task Board Todo Kanban이 목록에 있고 연결됨으로 보이면 돼요

  5. 해 보기

    Task Board Todo Kanban을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Claude Code가 Task Board Todo Kanban을 쓰고 있다고 하거나 답에 Task Board Todo Kanban 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Cursor에 연결할 수 있어요 · 약 5분

Task Board Todo Kanban 키가 필요해요 (제작자 사이트에서 가입, 비용이 들 수 있음)

  1. Task Board Todo Kanban에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 비용이 들 수 있어요.

    Task Board Todo Kanban 사이트 열기 ↗

  2. 이 버튼으로 Cursor 열기

    Cursor에서 열기

    Cursor가 설치를 확인하면 Install을 누르세요

  3. 키 입력

    Task Board Todo Kanban 설정에서 Authorization가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  4. Cursor에서 AI 채팅을 Agent 모드로 열기

  5. 해 보기

    Task Board Todo Kanban을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ Cursor가 Task Board Todo Kanban을 쓰고 있다고 하거나 답에 Task Board Todo Kanban 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

VS Code에 연결할 수 있어요 · 약 5분

Task Board Todo Kanban 키가 필요해요 (제작자 사이트에서 가입, 비용이 들 수 있음)

  1. Task Board Todo Kanban에 가입하고 키 만들기

    제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 비용이 들 수 있어요.

    Task Board Todo Kanban 사이트 열기 ↗

  2. 이 버튼으로 VS Code 열기

    VS Code에서 열기

    VS Code가 설치를 확인하면 Install을 누르세요

  3. 키 입력

    Task Board Todo Kanban 설정에서 Authorization가 비어 있어요. 내 키를 넣고 저장하세요

    키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요

  4. VS Code에서 AI 채팅을 Agent 모드로 열기

  5. 해 보기

    Task Board Todo Kanban을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐

    ✓ VS Code가 Task Board Todo Kanban을 쓰고 있다고 하거나 답에 Task Board Todo Kanban 도구 이름이 나오면 연결된 거예요

메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요

Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요

MCP를 쓰는 앱 모두 보기 →

웹으로 연결하는 앱용 주소

주소https://mcp.zovo.one/mcp/task-board-todo-kanban

JSON 설정은 아래 “개발자용”에 있어요

막혔나요? Task Board Todo Kanban을 쓰는 사람에게 물어보세요💬 토론 →
개발자용: 터미널 명령과 JSON 설정

웹으로 연결

Claude Code

claude mcp add --transport http task-board-todo-kanban https://mcp.zovo.one/mcp/task-board-todo-kanban --header 'Authorization: your-value'

Cursor (~/.cursor/mcp.json)

{
  "mcpServers": {
    "task-board-todo-kanban": {
      "url": "https://mcp.zovo.one/mcp/task-board-todo-kanban",
      "headers": {
        "Authorization": "your-value"
      }
    }
  }
}

VS Code (mcp.json)

{
  "servers": {
    "task-board-todo-kanban": {
      "type": "http",
      "url": "https://mcp.zovo.one/mcp/task-board-todo-kanban",
      "headers": {
        "Authorization": "your-value"
      }
    }
  }
}

직접 입력할 값

  • Authorization 비밀 필수 HTTP header
    Bearer

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

한눈에 보기

GitHub 스타i
2 (저장소 전체의 별)
이 저장소에는 MCP 항목이 여러 개 있어 별은 순위에서 한 번만 세요
주간 다운로드i
npm/PyPI에 없음
라이선스i
라이선스 표시 없음
연결 방식
클라우드에서 실행
전송 방식
streamable-http
최신 버전i
0.23.2
레지스트리 공개i
2026년 9월 26일
코드 마지막 변경i
2026년 11월 7일
제작자
theluckystrike
웹사이트
mcp.zovo.one
레지스트리 상태
활성

어떤 앱에서 쓸 수 있나요

이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.

인터넷으로 연결하는 앱

ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatOpen WebUIRaycast

모든 앱과 장단점 →

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 8일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • license_status

    Report this endpoint's licence state for your token as JSON: the product, the tier free or pro, why it is not Pro, and the checkout URL. Call it to explain a free-tier refusal. No arguments, nothing changes.

  • license_activate

    Turn Pro on for this connection with key, an MCPL1. . issued at checkout for this server or the bundle. Data under your token stays; a wrong or expired key changes nothing. license_status confirms it.

  • task_add

    Add one task to a board and return its id, board and column. The board is created on first use, so pass an existing project or leave it out. An identical open task is refused. Free: 3 boards, 200 open.

  • task_list

    List tasks as a table of id, project, column, title, priority, due, estimate, actual and tags, sorted by due date, with the total estimate. Done tasks are left out unless include_done. 200 rows default.

  • task_move

    Move one task to another column of its own board and report the old and new column. An unknown column is refused, listing the real ones. Entering the done column stamps completion; leaving it clears it.

  • task_update

    Change a task by id: only the fields you pass are touched. tags REPLACES the whole list, due 'none' clears it, and project moves the task to a board that already exists. Returns the task's new row.

  • task_done

    Mark one task finished: it moves to the board's done column (named done, else the last) and is stamped, leaving task_list and the open counts. Returns estimate against actual when both are known.

  • task_delete

    Delete one task by id, permanently; the id is never reused. The answer names any logged minutes lost. time-tracker entries are a separate store and are untouched. Use task_done to keep the record.

  • task_search

    Find tasks whose id, title, notes or tags contain the query, across every board, finished ones included. Plain case-insensitive substring, never a regex. Use task_list for structured filters.

  • board

    Show one board column by column: tasks, estimate, actual and overdue count in each, then the board totals and the estimate still open. Defaults to your busiest board. Use project_list for every board.

  • task_start_timer

    Return the exact arguments to pass to the time-tracker's timer_start for one task, and record the link here. It starts nothing itself, and warns when the tracker's own project names would misfile the time.

  • task_log_time

    Add real minutes worked to one task so estimate and actual can be compared. Minutes ADD; a negative corrects an over-count. Below zero or past 100,000 is refused. This counter is the board's own.

  • project_list

    List every board with its task-id prefix, open and done counts, estimate still open and overdue count, plus free-tier use (3 boards, 200 open tasks). Use board for one board broken down by column.

  • project_delete

    Delete an empty board and give its free-tier slot back. A board still holding tasks, open or done, is refused with one named, because task_add creates boards as a side effect and the work would be lost.

  • overdue

    List every task whose due day is already past, across all boards, oldest first, in the task_list table. as_of measures against a day you name. A finished task, or one with no due date, never counts.

  • weekly_review

    Compare done against planned for one ISO week per project: how many were due, how many of those are finished, how many were completed, and estimate against actual minutes. Any week but this one is Pro.

  • columns_set

    Replace one board's columns, in order, with 2 to 12 unique names. Tasks in a removed column move to the FIRST column. Blanks are dropped first, so a list normalising below two names is refused. Pro.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 11일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 theluckystrike 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • ✓ 통과

    계속 관리되고 있음

    코드 마지막 변경: 4일 전

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    577ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 17개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

토론

질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.

아직 글이 없어요. 처음으로 질문하거나 공유해 보세요.

이곳의 글은 사용자가 쓴 것으로, PopNx 팀의 글이 아니에요.

Google로 로그인하고 글쓰기

사용자 리뷰

아직 리뷰가 없어요

Google로 로그인하고 리뷰 쓰기

문서, 시트 및 사무 업무 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 3733개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 3733개 중 40%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 3733개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Task Board Todo Kanban, 안전한가요?

해당하는 기본 점검 4개 중 4개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: Authorization

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 4일 전 변경됐고, 최신 버전(0.23.2)은 2개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되므로 원격 MCP를 지원하는 앱에서도 쓸 수 있어요. 예: ChatGPT Business 이상.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Puter MCP, XcodeBuildMCP, XcodeBuildMCP

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Puter MCP

Puter MCP enables AI tools to interact with Puter: manage files, websites, workers, and more

제작자: HeyPuter널리 사용됨★ 4.4만5개월 전 업데이트

클라우드에서 실행✓ puter.com

XcodeBuildMCP

XcodeBuildMCP provides tools for Xcode project management, simulator management, and app utilities.

제작자: getsentry널리 사용됨↓ 13만/주★ 6.6천4개월 전 업데이트

내 컴퓨터에서 실행✓ xcodebuildmcp.com

XcodeBuildMCP

XcodeBuildMCP provides tools for Xcode project management, simulator management, and app utilities.

제작자: cameroncooke널리 사용됨↓ 13만/주★ 6.6천14개월 전 업데이트

내 컴퓨터에서 실행

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Run task boards from Claude with a free MCP kanban server

A task board for each of your projects, driven from your AI chat. Say "add a task to the nova site board: write the launch email, due Friday, 90 minutes", then ask "what's on the nova board?", "what's overdue?" or "plan my week". Tasks carry a title, notes, tags, a due date, an estimate, a priority and a column (backlog, todo, doing, review, done by default), each one gets a short stable id like NS-12, and a task can hand its exact arguments to the time-tracker server so the time you spend on it lands against the same project name. Everything is stored as plain JSON on your own machine.

Built by theluckystrike.

In the [official MCP Registry](https://registry.modelcontextprotocol.io/v0.1/servers/io.github.theluckystrike%2Fkanban-todo-tasks-projects-board/versions/latest) (io.github.theluckystrike/kanban-todo-tasks-projects-board).

A local kanban board per project, columns, due dates, estimates, weekly review, zero setup, all local.

60-second install

npm publish for @theluckystrike/mcp-kanban is pending. Until then, the .mcpb one-click bundle or a clone+build is the working path, both are verified below.

One-click (.mcpb): download kanban.mcpb from the latest release and double-click it in Claude Desktop: https://github.com/theluckystrike/mcp-servers/releases/latest

(claude_desktop_config.json):

{

"mcpServers": { "kanban": { "command": "npx", "args": ["-y", "@theluckystrike/mcp-kanban"] } } }

Claude Code:

claude mcp add kanban -- npx -y @theluckystrike/mcp-kanban

(.cursor/mcp.json):

{

"mcpServers": { "kanban": { "command": "npx", "args": ["-y", "@theluckystrike/mcp-kanban"] } } }

The npx form above starts working the moment the package is published. Until then, use the .mcpb bundle above, or build from source with exactly these three commands:

git clone https://github.com/theluckystrike/mcp-servers.git && cd mcp-servers

npm install npm run build -w packages/mcp-license -w servers/kanban

Then point your client's command at node with one arg: the absolute path to servers/kanban/dist/index.js.

To run in Pro mode set MCP_LICENSE_KEY in the same config block, or call license_activate once with your key.

Tools

ToolWhat it does
task_addAdd a task: title plus optional project, column, due date, estimate, priority, tags and notes. A new project name creates its board; a partial name that matches exactly one existing project is used as that project.
Due dates accept YYYY-MM-DD, today, tomorrow, yesterday, +3d, a weekday (friday, the nearest one from today) and next friday (the one after that).
task_listTable of tasks, filtered by project, column, tag, due_before or overdue. Finished tasks are hidden unless you ask for them. Prints 200 rows by default and says how many more there are; raise it with limit (max 2,000).
task_moveMove a task to another column on its board.
task_updateChange any field: title, notes, due (none clears it), estimate, priority, tags, column or project.
task_doneMark a task done: it moves to the done column and is stamped with the time.
task_deleteDelete a task. The id is never reused.
An identical task_add (same project, title, column, due date, estimate, priority, tags and notes as a task already open) is refused and names the task that already holds the slot, rather than writing a second copy.
task_searchFind tasks by text in the title, notes, tags or id.
boardColumn-by-column summary of one board: tasks, estimate total, actual total, overdue count.
task_start_timerReturn the exact arguments to pass to the time-tracker server's timer_start for this task, and record the link on the task.
task_log_timeAdd real minutes worked to a task, so estimate and actual can be compared.
project_listEvery board with open and done counts, remaining estimate and overdue count.
project_deleteDelete an empty board and free its project slot. A board that still holds tasks, open or done, is refused with a task named; clear them with task_delete first.
overdueEverything past its due date, across all boards; as_of measures against another day.
weekly_reviewDone versus planned for a week, with estimate against actual per project. This week is free; past weeks are Pro.
columns_setReplace one board's columns (Pro). Tasks in a removed column move to the first column.
license_statusFree or Pro, and where to upgrade.
license_activateActivate a Pro key (verified offline).

Also exposed: the resource kanban://today (due today plus everything overdue) and the prompt plan_week (turns the open board into a day-by-day plan that fits the hours you actually have).

What you can say

  • "Add a task to the nova site board: write the launch email, due Friday, 90 minutes, high priority."
  • "Move NS-3 to doing."
  • "What does the nova board look like?"
  • "What's overdue?"
  • "Start a timer on NS-3.", then pass the arguments it returns to the time-tracker server.
  • "I spent 40 minutes on NS-3."
  • "Weekly review."

Free vs Pro

FreePro
Project boards3unlimited
Open tasks200unlimited
Columnsthe default five (backlog, todo, doing, review, done)custom columns per board (columns_set)
Weekly reviewthe current weekany week, full history
Estimate vs actual reportscurrent week onlyevery week
Listing output200 rows per call, limit up to 2,000same
Everything elseincludedincluded

Pro is a one-time $19 for this server, or $39 for every server, lifetime.

Get Pro: https://mcp.zovo.one/buy/kanban

Pairs with

  • mcp-time-tracker, task_start_timer hands it the project and task name, so hours land against the same project.
  • mcp-calendar, due dates on the board next to what is actually in your week.
  • mcp-invoice, turn the tracked hours behind those tasks into invoice line items.

Privacy

All data stays local, in ${XDG_DATA_HOME:-~/.local/share}/mcp-servers/kanban/. Nothing is uploaded, no account is needed, and licence keys are verified offline.

License

MIT. Support: support@zovo.one

Frequently asked questions

Is there an MCP kanban server?

Yes. The kanban server at mcp.zovo.one gives Claude a hosted kanban board: create boards, columns and cards, move cards between columns, all from any MCP client. Unlike the local-only GitHub repos it is hosted and free to start - nothing to clone or run.

How do I manage a kanban board from Claude?

Connect https://mcp.zovo.one/mcp/kanban and say: 'Create a board with To do, Doing, Done and add a card Design the landing page to To do.'

Use these docs as an MCP server

Any MCP client (Claude, Cursor, Windsurf, VS Code) can read this repository's documentation directly via GitMCP - no install:

  • Docs MCP URL: https://gitmcp.io/theluckystrike/mcp-kanban