프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

TrueProxies

제작자: trueproxies-com버전 1.0.5i★ –i클라우드에서 실행
레지스트리 이름com.trueproxies/mcp

설치

개요

제작자가 쓴 설명(영어 원문)

Plans, services, usage, invoices, endpoints and connection checks for your TrueProxies account

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 기타
  • 입력해야 할 값: Authorization

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

비밀로 표시된 값은 내 계정의 열쇠예요. 절대 다른 사람과 공유하거나 채팅에 붙여 넣지 마세요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

이 주소는 요청 header에 키가 필요한데, 커넥터 추가 메뉴에서는 넣을 수 없어요. 대신 Claude Code, Cursor, VS Code를 쓰세요.

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http trueproxies https://mcp.trueproxies.com/mcp --header 'Authorization: your-value'

실행하기 전에 빈 값을 채워 주세요.

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "trueproxies": {
      "url": "https://mcp.trueproxies.com/mcp",
      "headers": {
        "Authorization": "your-value"
      }
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "trueproxies": {
      "type": "http",
      "url": "https://mcp.trueproxies.com/mcp",
      "headers": {
        "Authorization": "your-value"
      }
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 주소는 요청 header에 키가 필요한데, 커넥터 추가 메뉴에서는 넣을 수 없어요. 대신 Claude Code, Cursor, VS Code를 쓰세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

직접 입력할 값

  • Authorization 비밀 HTTP header
    TrueProxies API key as 'Bearer tp_api_...'. list_plans works without one.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • check_connection

    Sends one request through the service from TrueProxies and reports the outcome and exit IP, to tell a proxy problem apart from a website refusing you. It counts as use of the service: it uses a little traffic and starts an unused free trial. Does not measure speed. Limited to a f

  • generate_endpoints

    Builds proxy connection lines for a service with the chosen protocol, format, location targeting and session type: one line, or up to 1,000 sticky sessions with session sticky. Does not change the service. The output contains the proxy username and password, which let anyone who

  • get_account

    Returns the TrueProxies account that owns the API key: account reference, email, role, status and billing details.

  • get_invoice

    Returns one invoice: status, amounts in cents, payment attempts and its service. Does not start a payment.

  • get_live_traffic

    Returns live traffic for one service: download and upload speed in bits per second over the last ten seconds, traffic used today (UTC) and recent connection outcomes. last_activity_at shows how fresh the data is.

  • get_service

    Returns one service: status, expiry, connection hosts and ports, capabilities (the targeting and session options it supports) and effective limits. Does not return the proxy password.

  • get_traffic_used

    Returns traffic for one service, in bytes: bytes_out is downloaded and bytes_in is uploaded since the service started, remaining_bytes is traffic remaining and allowance_bytes is the allowance. traffic_batches lists traffic packs; traffic bought now never expires, and only older

  • get_usage_history

    Returns usage history for one service, or for the whole account when service_id is empty: connection success, traffic and connection errors over the last 24h, 7d or 30d. In series, bytes_out is downloaded and bytes_in is uploaded. Can lag recent traffic.

  • list_invoices

    Lists invoices with status (open, paid or cancelled), kind, amount in cents and the service each belongs to. Paginated: pass next_cursor from the previous response as cursor.

  • list_plans

    Lists TrueProxies plans and traffic packs: price in US cents, term, speed, connection limits, traffic allowance and targeting capabilities. Also returns the cities available for city targeting and whether the free trial is open. Traffic packs (residential_ipv4_gb, residential_ipv

  • list_services

    Lists the services on the account with status, product, plan, expiry and connection hosts. Paginated: pass next_cursor from the previous response as cursor.

  • list_trusted_ips

    Lists the IP whitelist of a service: addresses allowed to connect without the proxy password.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 trueproxies.com 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    560ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 12개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32599개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32599개 중 90%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32599개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

TrueProxies, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

입력해야 할 값: Authorization

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.0.5)은 3일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, Zendesk

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

Zendesk

제작자: pipeworx-io

Zendesk MCP Pack — tickets, users, organizations via OAuth.

컴퓨터 또는 클라우드오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

TrueProxies MCP server

Connect Claude, Cursor or any MCP client to your TrueProxies account. Ask about plans and prices, your services, traffic used, live traffic, usage history and invoices, generate endpoints and check a connection.

The server cannot buy, pay, change your proxy password or change the IP whitelist. Every tool only reads, except check_connection, which sends one request through your service.

Tools

ToolWhat it returnsAPI key scope
list_plansPlans, traffic packs, prices, cities, free trial availabilitynone
get_accountYour accountservices:read
list_servicesYour servicesservices:read
get_serviceOne service: hosts, ports, capabilities, limitsservices:read
get_traffic_usedTraffic used and remainingservices:read
get_live_trafficLive download and upload speed, traffic used todayservices:read
get_usage_historyConnection success, traffic and connection errors over 24h, 7d or 30dservices:read
list_invoicesYour invoicesbilling:read
get_invoiceOne invoicebilling:read
generate_endpointsProxy connection lines, including the username and passwordproxy:read
check_connectionThe result and exit IP of one request through your service. It uses a little traffic and starts an unused free trial.proxy:read
list_trusted_ipsThe IP whitelist of a serviceproxy:read

API key

Create an API key in the TrueProxies dashboard under API. For read-only use, give it services:read and billing:read. Add proxy:read only if the assistant should generate endpoints, check connections or list whitelisted IPs: endpoints contain your proxy password.

Connect

Hosted (nothing to install):

claude mcp add --transport http trueproxies https://mcp.trueproxies.com/mcp \

--header "Authorization: Bearer $TRUEPROXIES_API_KEY"

Cursor (~/.cursor/mcp.json):

{

"mcpServers": { "trueproxies": { "url": "https://mcp.trueproxies.com/mcp", "headers": { "Authorization": "Bearer ${env:TRUEPROXIES_API_KEY}" } } } }

Local, with Docker. Build the image once:

docker build -t trueproxies-mcp https://github.com/trueproxies-com/trueproxies-mcp.git
{

"mcpServers": { "trueproxies": { "command": "docker", "args": ["run", "-i", "--rm", "-e", "TRUEPROXIES_API_KEY", "trueproxies-mcp"], "env": { "TRUEPROXIES_API_KEY": "tp_api_..." } } } }

Local, with Go: go install github.com/trueproxies-com/trueproxies-mcp@latest, then run trueproxies-mcp stdio with TRUEPROXIES_API_KEY set.

Privacy

The hosted server forwards your API key to api.trueproxies.com for each call and keeps nothing. It logs the tool name, status, request ID and duration, never arguments, results or keys. mcp.trueproxies.com is served through Cloudflare, which decrypts traffic in transit like any Cloudflare-proxied site, so your API key and any endpoints pass through Cloudflare. To avoid that, run the server locally.

Links

License

MIT

PopNx에게 묻기