프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

proofcut

제작자: tydude001버전 0.45.0i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.tydude001/proofcut

설치

개요

제작자가 쓴 설명(영어 원문)

Local-first AI video editor: recordings to a finished film, cut by transcript, then verified

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 디자인, 이미지 및 오디오

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • PyPIPython의 uv 설치(uvx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "proofcut": {
      "command": "uvx",
      "args": [
        "proofcut",
        "mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add proofcut -- uvx proofcut mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "proofcut": {
      "command": "uvx",
      "args": [
        "proofcut",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "proofcut": {
      "type": "stdio",
      "command": "uvx",
      "args": [
        "proofcut",
        "mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 tydude001 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

디자인, 이미지 및 오디오 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 2177개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 2177개 중 46%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 2177개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

proofcut, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.45.0)은 32일 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Python (uv)도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Figma Context MCP, Claude Real Video, Figma MCP Server

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Figma Context MCP

제작자: GLips

Give your coding agent access to your Figma data. Implement designs in any framework in one-shot.

내 컴퓨터에서 실행★ 16,165MIT5개월 전 업데이트
설치

Claude Real Video

제작자: HUANGCHIHHUNGLeo

Let any LLM watch a video locally — and search everything it has ever watched.

내 컴퓨터에서 실행★ 2,284MIT2개월 전 업데이트
설치

Figma MCP Server

제작자: figma

The Figma MCP server brings Figma design context directly into your AI workflow.

클라우드에서 실행★ 2,15213개월 전 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

An AI video editor that proves its cuts. Your recordings in, a finished, mastered film out: cut by transcript, with b-roll, cards, music and captions, and every step an agent can call. proofcut renders on your own machine, then transcribes the render and checks that it says what the edit says.

https://github.com/user-attachments/assets/4153d180-3d7c-4c70-af5f-54d63d0a8bd5

An agent cutting a demo video, unattended, from a goal and no steps.

The two runs it was cut from, uncut

Silent, because the recorder took frames only; the voice is in the film the agent cut. The workspace (2:26) and Claude Code with the proofcut plugin (3:09).

Runs on Linux, where it is developed. macOS and Windows pass the test suite on CI; how far each has gone by hand is § Help wanted.

Quickstart

With uv installed:

uvx proofcut doctor          # only looks: what is missing, and the fix for each

uvx proofcut setup --plan # what an install would fetch, and its size; touches nothing uvx proofcut setup # installs it for you alone, no sudo; --uninstall reverses it

Then make the two-minute demo, or give an agent the tools with the Claude Code plugin. § Try it walks all of it.

Why it exists

Most of the work in a narrated video, whether an essay, a tutorial, a screencast or a talk, is bookkeeping. Find the retakes and cut them clean. Put the right footage under each line. Level the music under the voice, caption it, end on a card, render it, master it. An agent can do that bookkeeping now, given an editor it can drive.

What an agent cannot do on its own is know that the file it rendered is the film it meant. ffmpeg, melt and auto-editor all exit 0 on some failures, so a render can drop a line, keep a retake, add a frame of black or carry no captions and still report success. Every check that reads the project rather than the file agrees with it. The usual way to find out is to watch the whole thing.

proofcut is an editor built around that gap. You, or an agent, edit a timeline addressed by the words in it. proofcut renders it on your machine, then transcribes the render, counts its frames, and says where the file and the edit disagree.

Here it is on the demo project. The retake is cut from the edit, and verify is pointed at a render made before the cut:

proofcut -C proj cut vo 11:23 --pad 0.1

proofcut -C proj verify stale.mp4

"expected_words": 34, "heard_words": 47, "similarity": 0.84, "diff": ["--- timeline", "+++ render", "@@ -10,4 +10,17 @@", " video", " editor", "+every", "+cut", "+you", "+make", "+names", "+a", "+um", "+no", "+let", "+me", "+try", "+that", "+again", " every", " cut"]

The file still says the thirteen words the edit took out, and verify names them. A render of the edit as it stands hears all 34 (DEMO.md step 7).

Run, not staged

TRIAL.md scores three unattended runs, each handed a goal and no steps, and each passed every one of its checks:

  • The demo cut, the one above.
  • Real footage. 96 seconds of narration with its fluffed takes left in, plus four clips of film footage. The agent cut it to 45 seconds, chose footage by what each line was about, burned captions, and checked its own render: all 123 expected words heard back.
  • A whole film. The demo material plus a score, briefed as a finished film ready to upload. In 192 seconds and $2.27 the agent cut it, laid the music under the voice, ended on a card, mastered it to −16 LUFS, and checked it. The score, the level and the end card were each measured in the delivered file, not taken from the project.

How it compares

COMPETITORS.md reads every entry from its source, most recently on 2026-09-28. In short:

  • Transcript editors (the Descript model, and its open-source re-implementations) cut by deleting words, for a person's hands. None of the open ones has an agent surface, and none checks its render.
  • Agent editors over MCP let an agent drive the edit. The nearest render checks among them compare the duration within a tolerance, or transcribe short windows around suspect seams. None diffs the whole render's words against the cut.
  • NLEs (Kdenlive, Resolve, Premiere) are where a person finishes by hand, and DaVinci Resolve 21.1 now ships an MCP server of its own. proofcut exports to them rather than replacing them, and, with the trim brought back by import-edit, verify checks what they deliver.
  • auto-editor removes silences headlessly. proofcut uses it as a render backend.

What proofcut lacks that others have: a check for frozen or silent spans in a render.

What it can do

Every stage from the first import to the delivered file is a proofcut command. No NLE finishes the film, and nothing else touches the render. Each row links the manual section that walks it.

Two video essays of five to six minutes, first finished in Kdenlive, have been rebuilt with these commands alone and measured against the delivered files. One came out the same length to the frame. The other matched all 63 of its voiceover ranges to the millisecond, with the voice aligned to the sample. Both master at the original's −16 LUFS. The measurements are in HISTORY.md.

Beyond those stages:

  • Cuts stay addressable. A word's index never renumbers, so cut vo 111:114 names the same words however many cuts came before it, and a cue hung off a phrase stays addressed through every cut around it.
  • An agent that can look. shot-sheet draws the whole picture track as one labelled grid, and footage-sheet browses a clip you haven't cut yet. Both return the image itself over MCP, not a path the agent can't open.
  • B-roll by description. describe writes what is on screen in each ~10-second window of footage, so an agent can choose a clip by what a line is about.
  • Transcript self-checks. Retake seams, invented words, swallowed repeats and suspect durations are reported when a transcript is attached, and unspoken lets the render itself testify to words nobody said.
  • Reframing for another aspect. Per-shot crop windows, face-aware proposals (reframe-detect), a review sheet, and stacked splits for two speakers. Cards are redrawn at the new frame size, never stretched.
  • Screen recordings. Named instants (events) that a crop, a sound or a speed change can hang off, a clip inset into the recording, and a retime for the slow parts.
  • Animated graphics. A web page, written by an agent or filled from a template (typing, a highlighter sweep, a letter build, chips), captured frame by frame and placed over a span of words. It animates in, holds for the span, and animates out, so a cut never breaks one. A page can show the project's own footage, exact to the frame, and saved graphics carry across projects.
  • Stills and stickers. Photos and cut-outs go in once, upright, and play full frame or ride over the film: placed, sized, turned, framed as a photo card, popping or sliding in. Paste one into the agent's prompt and it is added.
  • Built for agents. 132 MCP tools with typed inputs, structured returns and read/write annotations, so Claude Code, Codex or your own agent can drive it and a permission layer can tell a look from a change.
  • No lock-in. The timeline is OpenTimelineIO, the manifest is JSON, and the render is ffmpeg's and MLT's. Export a .kdenlive or OTIO file and finish anywhere.

How people use it

Tell an agent what film you want. In Claude Code, install the plugin and describe the film: which recording is the voice, what the b-roll is, where the music goes, what it ends on. The agent imports, transcribes, cuts the retakes, hangs footage off the lines it belongs to, scores, masters and checks the render, using proofcut's tools and nothing else. It can look at the picture track as a labelled grid while it works, so it sees what

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요

PopNx에게 묻기