MinerU
Transforms complex documents like PDFs and Office docs into LLM-ready markdown/JSON for your Agentic workflows.
Use the Chrome or Firefox tabs you share, signed in as you: read, click, fill forms, debug.
제작자가 쓴 원문
이런 작업을 AI에게 가르치는 Skill, 이것과 함께 쓸 수 있습니다
Transforms complex documents like PDFs and Office docs into LLM-ready markdown/JSON for your Agentic workflows.
Agent skills for Obsidian. Teach your agent to use Obsidian CLI and open formats including Markdown, Bases, JSON Canvas.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 12/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Tether 설치해 줘. https://mcp.popnx.com/i/udaysinh-git-tether.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 17일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Tether을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "tether": { "command": "npx", "args": [ "-y", "tether-browser" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Tether의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
SettingsDeveloperEdit Config
{
"mcpServers": {
"tether": {
"command": "npx",
"args": [
"-y",
"tether-browser"
]
}
}
}Tether을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Tether을 쓰고 있다고 하거나 답에 Tether 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Tether에 연결할 수 없어요
Tether는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Tether에 연결되는 앱 쓰기
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Tether을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user tether -- npx -y tether-browser 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Tether의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user tether -- npx -y tether-browserTether이 목록에 있고 연결됨으로 보이면 돼요
Tether을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Tether을 쓰고 있다고 하거나 답에 Tether 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Tether을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "tether": { "command": "npx", "args": [ "-y", "tether-browser" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Tether의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
Tether을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Tether을 쓰고 있다고 하거나 답에 Tether 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
먼저 컴퓨터에 Node.js를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Tether을 설치해 주세요. 순서대로: 1) node -v로 Node.js가 있는지 확인. 없으면 https://nodejs.org/en/download에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "tether": { "type": "stdio", "command": "npx", "args": [ "-y", "tether-browser" ] } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) 키는 필요 없습니다. 5) 합의한 대로 실행한 뒤 Tether의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
node -vMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: 공식 다운로드 페이지에서 LTS 버전과 클릭형 설치 파일을 고르세요: Mac은 .pkg · Windows는 .msi. 더블클릭 후 끝까지 진행하면 됩니다. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: node -v
한 번 설치하면 Node.js가 필요한 모든 도구에서 쓸 수 있습니다
Tether을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Tether을 쓰고 있다고 하거나 답에 Tether 도구 이름이 나오면 연결된 거예요
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Claude Code
claude mcp add --scope user tether -- npx -y tether-browserClaude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"tether": {
"command": "npx",
"args": [
"-y",
"tether-browser"
]
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"tether": {
"command": "npx",
"args": [
"-y",
"tether-browser"
]
}
}
}VS Code (mcp.json)
{
"servers": {
"tether": {
"type": "stdio",
"command": "npx",
"args": [
"-y",
"tether-browser"
]
}
}
}이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 20일 점검
레지스트리 이름이 GitHub 계정 udaysinh-git 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 3일 전
MIT 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
OSV.dev에 tether-browser@0.3.5 항목이 없습니다
이 버전의 패키지 자체만 확인하며 모든 의존성은 아닙니다 · 확인 2026년 11월 17일
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/udaysinh-git-tether)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 3일 전 변경됐고, 최신 버전(0.3.5)은 3일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.
같은 카테고리에는: Puter MCP, XcodeBuildMCP, Vexa, Atlassian Rovo MCP Server, Anki MCP Server
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Puter MCP enables AI tools to interact with Puter: manage files, websites, workers, and more
XcodeBuildMCP provides tools for Xcode project management, simulator management, and app utilities.
Meeting bot and transcripts for Google Meet, Teams and Zoom. Live or after, speakers labelled.
Connect to Atlassian Jira, Confluence, Loom, and more to search, create, and manage your work.
MCP server for Anki flashcards: adaptive review, notes, media, and deck management via AnkiConnect.
| 이 항목 Tether | Puter MCP | XcodeBuildMCP | Vexa | Atlassian Rovo MCP Server | Anki MCP Server | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 컴퓨터에 설치 필요 |
| 키 필요 | 아니요 | 아니요 | 아니요 | 예 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 예 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 3/3 | 2/4 | 4/4 | 3/3 |
| 라이선스 | MIT | AGPL-3.0 | MIT | Apache-2.0 | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
Tether
Website · Guide · Discord · MIT licence
Tether lets Claude Code, Codex or any other MCP client use the browser you already use, signed in as you. You choose which tabs it gets. From there the agent can read pages, fill and submit forms, click through flows, read the network log and console, save files and media, and change how a site looks or behaves.
A browser extension (Chrome, Brave, Edge and other Chromium browsers; Firefox, Zen and other Firefox forks) talks to a small local host, and every MCP agent on the machine connects to that host. Nothing on a tab is visible to an agent until you share it or approve the agent's request.
Ideas, feedback and early builds live in the #tether channel of the KuroLabs Discord. The most requested ideas get built first.
You need Node 20 or newer.
npm install -g tether-browser
tether setup
setup prints the lines that add Tether to your agents, prints your pairing key, and registers the bridge Firefox-based browsers use. Then:
setup prints. It uses full paths, which works everywhere, including Windows. For Claude Code it looks like: claude mcp add --scope user tether -- node /path/to/node_modules/tether-browser/host/cli.js
Codex, in ~/.codex/config.toml (single quotes, so Windows backslashes stay literal):
[mcp_servers.tether]
command = 'node' args = ['/path/to/node_modules/tether-browser/host/cli.js']
Any other MCP client runs the same command as a stdio server.
Firefox, Zen, LibreWolf, Floorp or Waterfox: download tether-firefox- .xpi and open it with your browser, or use about:addons, the gear menu, Install Add-on From File. It's signed by Mozilla, and no key is needed; the bridge supplies it.
Chrome, Brave or Edge: download tether-chrome- .zip and unzip it, open chrome://extensions, turn on Developer mode, click Load unpacked and pick the unzipped folder. Click the Tether icon and paste the pairing key.
tether doctor.Open a page, click the Tether icon and choose Share this tab, or just ask your agent to do something in the browser and approve its request.
git clone https://github.com/udaysinh-git/tether.git
cd tether npm install npm run build node host/cli.js setup
Then load dist/chrome as an unpacked extension, or in Firefox open about:debugging, This Firefox, Load Temporary Add-on and pick dist/firefox/manifest.json.
Claude Code ─┐ ┌─ Chrome extension ──── shared tabs
Codex ───────┼─ tether (stdio) ─ HTTP ─ host ┤ other MCP ───┘ 127.0.0.1:47821 └─ Firefox bridge ─ Firefox extension ── shared tabs
Each agent starts tether as an ordinary stdio MCP server. The first one starts the host in the background and later ones join it, so every agent sees the same browsers. Chromium extensions connect to the host over a local WebSocket. Firefox upgrades an extension's ws://127.0.0.1 connection to wss://, which can't reach a local server, so Firefox-based browsers start a small native messaging bridge instead; the bridge also starts the host when needed and fills in the pairing key. The host quits after 30 minutes with nothing connected.
A tab becomes available to agents in one of these ways:
start_session and you approve it.target="_blank", window.open). Tabs you open yourself don't count.open_tab, or any tab is opened inside the agent's own window.A shared tab gets a gold badge on the toolbar icon and a small status panel on the page with the agent's name, its latest action, Pause and Stop.
An agent doesn't need you to click first. It calls start_session with a one-sentence reason, and a prompt in your browser asks you:
end_session closes it, or you close it.mode: "current"): for "help me with this page".The agent has a visible cursor: a gold pointer with its name moves to each element before it clicks, types or picks something, and clicks show a small ripple.
Pause on the status panel or in the popup holds the agent. It can still read the page, but every click, keystroke and navigation is refused until you press Resume. When the agent reaches something only you should do, like a CAPTCHA, a code from your phone, a login or a payment confirmation, it calls wait_for_user. The tab comes to the front with its message and a Done button, and it carries on when you press it.
Drag the status panel anywhere on the page; double-click it to put it back in the corner. To keep pages clear, turn off Show status on the page in the popup. It then appears only when the agent needs you.
snapshot gives the agent the page as an outline: headings, text and every control, each with a ref like [e14]. It acts by ref with click, type, fill_form, select_option, press_key, hover, scroll and upload_file, and each action returns a fresh outline. Content inside cross-origin iframes (payment forms, embedded forms, widgets) is part of the outline, with refs like [f12.e5] that work in every tool.
In Chromium, Tether uses the browser's debugger, so clicks and keystrokes arrive as real input, scripts run on pages with strict security policies, and the network log includes response bodies. Chromium shows a "started debugging this browser" bar while that is active. Firefox has no debugger API, so there clicks and typing are DOM events, which nearly every site accepts.
network_requests lists every request since the tab was shared, network_request shows one with headers and both bodies, console_messages returns console output and uncaught errors, and cookies lists the page's cookies, including httpOnly ones.
list_media lists the images (including blob: ones), video, audio, canvases and background images on a page, plus HLS and DASH streams and media files from the network log. save_media saves any of them to ~/.tether/media/ / with your cookies; blob: URLs and canvases are read out of the page, and streams are joined into one .mp4 with ffmpeg if it's installed. video_frame returns the frame a video is showing.
After a click that downloads something, wait_for_download returns the file's path, and download_file fetches a URL on a shared site with your cookies. Agents only see downloads that started while a tab was shared, never your download history.
When a task needs tabs you already have open, the agent calls request_bypass with a reason and you allow or decline it in a prompt. You can also turn it on from the popup. While it's on, every tab is available and any tab the agent touches gets the badge and status panel. It turns off when you switch it off, press Stop everything or close the browser.
The interface is dark on purpose: Charcoal #1A1A1A, Jet #2D2D2D, Davy's Gray #5A5A5A, Off White #FFFBF0 and one accent, Metallic Gold #D4AF37, which always means "an agent can use this". Surfaces are flat with hairline borders.
Buttons are pills that press in and spring back, switches stretch as they slide, the popup animates between states instead of redrawing, and the status panel on the page changes shape on one spring as it moves between Shared, Paused and "needs you". Messages arrive in a stack of toasts that fans out when you point at it.
Short synthesised sounds (no audio files) mark sharing, stopping, pausing, switches, prompts, an agent asking for you, and watcher alerts, plus a quiet tick as the agent clicks. Turn them off with Play sounds in settings.
skills/tether-browser/SKILL.md tells agents to use Tether for browser work instead of Playwright, and covers starting sessions, the outline-and-ref loop, iframes, debugging, media, watchers, restyling, scripts, reading recordings, and when to ask you first. Link it into each agent's skills folder so it stays up to date. With the npm install, the folder is at $(npm root -g)/tether-browser/skills/tether-browser; from a source checkout, run this in the repo:
foreach ($d in "$env:USERPROFILE\.claude\skills", "$env:USERPROFILE\.codex\skills", "$env:USERPROFILE\.agents\skills") {
New-Item -ItemType Junction -Path "$d\tether-browser" -Target "$PWD\skills\tether-browser" }
On macOS or Linux: ln -s "$PWD/skills/tether-browser" ~/.claude/skills/, and the same for the other folders.
Request a change in the popup takes a note plus pasted, dropped or attached images: a screenshot of a site you like, a mockup, a sketch. Pick lets you click any part of the page and write a note about it; the agent then also gets that element's selector, text, HTML and outline, a crop of it and a screenshot of the page. Sending either one shares the tab.
Tell your ag