프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Adafruit IO MCP by usefulapi

제작자: m190버전 1.22.3i★ –i클라우드에서 실행
레지스트리 이름io.usefulapi/adafruit-io

설치

개요

제작자가 쓴 설명(영어 원문)

Read Adafruit IO feeds, data, groups and dashboards; publish a data point or create a feed.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://adafruit-io.usefulapi.io/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http adafruit-io https://adafruit-io.usefulapi.io/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "adafruit-io": {
      "url": "https://adafruit-io.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "adafruit-io": {
      "type": "http",
      "url": "https://adafruit-io.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://adafruit-io.usefulapi.io/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • adafruitio_get_user

    The Adafruit IO account this key belongs to: id, name, username, time zone, created/updated times, plus the data rate limit when reported. GET /api/v2/user.

  • adafruitio_get_throttle

    The account's data rate limit (data-record modifications per minute: 30 on free accounts, 60 on Plus) and the current active data rate. Check it before publishing many points. GET /api/v2/{username}/throttle.

  • adafruitio_list_feeds

    List all of the account's feeds with key, name, description, unit, visibility, enabled flag, last value and last update. GET /feeds.

  • adafruitio_get_feed

    One feed by key: name, description, unit, visibility, last value, status settings and the groups it belongs to. GET /feeds/{feed_key}.

  • adafruitio_get_feed_details

    A feed with its details block: first and last data point and the number of stored points. GET /feeds/{feed_key}/details.

  • adafruitio_list_feed_data

    Data points of a feed (max 1000 per call). Newest first, except that with start_time the API returns the oldest page after that time. Filter by time range and limit; to read further back call again with the reply's next_page_args (the same filters plus `before`). GET /feeds/{feed

  • adafruitio_get_last_data

    The most recent data point of a feed (value, location, created_at). GET /feeds/{feed_key}/data/last.

  • adafruitio_get_data_point

    One stored data point of a feed by its id. GET /feeds/{feed_key}/data/{id}.

  • adafruitio_get_feed_chart

    Aggregated chart data for a feed: values sliced by `resolution` minutes over the last `hours` (or a start/end range), using avg, sum, min, max, val or val_count. Good for trends without downloading every point. GET /feeds/{feed_key}/data/chart.

  • adafruitio_list_groups

    List the account's groups (named sets of feeds) with their feeds. GET /groups.

  • adafruitio_get_group

    One group by key with its feeds. GET /groups/{group_key}.

  • adafruitio_list_dashboards

    List the account's dashboards with key, name, description and visibility. GET /dashboards.

  • adafruitio_get_dashboard

    One dashboard by key. GET /dashboards/{dashboard_key}.

  • adafruitio_list_blocks

    The blocks (widgets: gauges, toggles, charts, sliders...) of a dashboard with their feeds, position and properties. Integration secrets in properties are removed. GET /dashboards/{dashboard_key}/blocks.

  • adafruitio_list_activities

    The account's activity log (feed/data/dashboard changes), optionally within a time range. GET /activities.

  • adafruitio_publish_data_point

    WRITE: publish one data point (a value) to a feed. This can drive REAL DEVICES: anything subscribed to the feed (relays, motors, lights, heaters, locks, dashboard toggles) will receive and may act on the value, and it cannot be undone from here. Only publish a value the user has

  • adafruitio_create_feed

    WRITE: create a new, empty feed (private by default), optionally inside an existing group. Adds a feed only; it does not change or delete anything existing, and fails if the name is taken. POST /feeds.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 usefulapi.io 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    20ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 17개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32464개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32464개 중 97%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32464개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Adafruit IO MCP by usefulapi, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.22.3)은 어제 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, yontu

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

yontu

제작자: senrecep

Türkçe yazı denetimi: TDK kuralları, yapay zekâ izleri, metin türüne göre üslup.

내 컴퓨터에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Adafruit IO MCP by usefulapi

Use Adafruit IO from Claude, Cursor, or any MCP client — IoT feeds, feed data and charts, groups, dashboards and activity, plus single data-point publishes. Hosted, no local install: connect with your own Adafruit IO credentials.

Live endpoint: https://adafruit-io.usefulapi.io/mcp · Homepage: https://usefulapi.io/adafruit-io

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://adafruit-io.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http adafruit-io https://adafruit-io.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "adafruit-io": { "url": "https://adafruit-io.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Adafruit IO credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/adafruit-io/

Tools

ToolTypeWhat it does
adafruitio_get_userreadGet user
adafruitio_get_throttlereadGet data rate limit
adafruitio_list_feedsreadList feeds
adafruitio_get_feedreadGet feed
adafruitio_get_feed_detailsreadGet feed details
adafruitio_list_feed_datareadList feed data
adafruitio_get_last_datareadGet latest data point
adafruitio_get_data_pointreadGet data point
adafruitio_get_feed_chartreadGet feed chart data
adafruitio_list_groupsreadList groups
adafruitio_get_groupreadGet group
adafruitio_list_dashboardsreadList dashboards
adafruitio_get_dashboardreadGet dashboard
adafruitio_list_blocksreadList dashboard blocks
adafruitio_list_activitiesreadList activity log
adafruitio_publish_data_pointwritePublish data point
adafruitio_create_feedwriteCreate feed
adafruitio_usage_statusmetaUsage status (free-tier meter)
adafruitio_request_featuremetaRequest a missing feature
adafruitio_upgrademetaUpgrade to Pro or Pro+
adafruitio_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with adafruitio_upgrade (it returns a Stripe Checkout link). Cancel any time with adafruitio_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running adafruitio_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by Adafruit IO.

PopNx에게 묻기