프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

AiSensy MCP by usefulapi

제작자: m190버전 1.16.2i★ –i클라우드에서 실행
레지스트리 이름io.usefulapi/aisensy

설치

개요

제작자가 쓴 설명(영어 원문)

Read AiSensy contacts, templates and campaigns; add contacts, send WhatsApp messages on approval.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 채팅 및 이메일

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://aisensy.usefulapi.io/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http aisensy https://aisensy.usefulapi.io/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "aisensy": {
      "url": "https://aisensy.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "aisensy": {
      "type": "http",
      "url": "https://aisensy.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://aisensy.usefulapi.io/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • aisensy_get_project

    The AiSensy project (WhatsApp account) this key belongs to: name, status, plan and renewal date, monthly active user quota and usage, credit balance (raw units as AiSensy reports them), WhatsApp number, display name status, quality rating and messaging tier. GET /project/{project

  • aisensy_list_templates

    List the WhatsApp template messages of the project with name, language, status (PENDING, APPROVED, REJECTED), category, text and parameter count. Only APPROVED templates can be sent. Pages by record id: pass next_after from the previous reply as `after`. GET /project/{project_id}

  • aisensy_get_template

    One WhatsApp template by id, with status, rejection reason, buttons and text. GET /project/{project_id}/wa_template/{id}.

  • aisensy_list_campaigns

    List campaigns (API campaigns, broadcasts or both) with name, type, status, audience size, submitted count, template and creation time. Pages with skip + limit. POST /project/{project_id}/campaigns (a read: it only queries).

  • aisensy_list_api_campaigns

    List the project's API campaigns (the campaigns messages can be sent through) with status and template. A campaign must be LIVE to send. GET /project/{project_id}/campaign/api.

  • aisensy_get_api_campaign

    One API campaign by id: status, template, parameters and counts. GET /project/{project_id}/campaign/api/{campaign_id}.

  • aisensy_get_campaign_analytics

    Daily delivery and credit-usage statistics of one campaign (sent, delivered, read, failed counts and message credit usage), optionally within a date range. POST /project/{project_id}/campaign/analytics/{campaign_id} (a read: it only queries).

  • aisensy_list_campaign_audience

    Who a campaign was sent to, with name, number and sent/delivered/read times, optionally filtered by outcome (SENT, DELIVERED, READ, FAILED, REPLIED, CLICKED) and date range. Pages by cursor: pass next_after from the previous reply as `after`. GET /project/{project_id}/campaign/au

  • aisensy_create_api_campaign

    WRITE: create an API campaign that binds a name to an APPROVED WhatsApp template. It sends nothing; messages go out only when aisensy_send_campaign_message is called for it. Not idempotent: calling twice with the same name may create two campaigns or fail. POST /project/{project_

  • aisensy_find_contact

    Look up a contact by phone number: id, name, tags, attributes, opt-in/chat state and last activity. 404 means no such contact. GET /project/{project_id}/contact?action=FetchContact&mobile_number=.

  • aisensy_get_contact

    One contact by id: name, phone number, tags, attributes, chat state and last activity. GET /project/{project_id}/contact/{contact_id}.

  • aisensy_create_contact

    WRITE: add a contact (name and phone number with country code). AiSensy opts new contacts in to WhatsApp notifications automatically, so only add people who agreed to be messaged. A number that already exists returns a 409 conflict. POST /project/{project_id}/contact.

  • aisensy_update_contact

    WRITE: change a contact's name, custom attributes, WhatsApp opt-in status or blocked status. Setting opted_in=false stops campaign messages to that person; blocked=true blocks them. Only the fields you pass change. PATCH /project/{project_id}/contact/{contact_id}.

  • aisensy_upsert_contacts

    WRITE (bulk): create or update up to 50 contacts by phone number in one call. Each row: phone_number, and optionally name (needed to create a new contact), attributes and opted_in. Without confirm=true it only PREVIEWS: it looks up every number and returns what would be created,

  • aisensy_get_message

    One WhatsApp message by id: status (SENT, DELIVERED, READ), sent/delivered/read times, sender, campaign, content and price. GET /project/{project_id}/messages/{message_id}.

  • aisensy_send_campaign_message

    WRITE, SENDS A WHATSAPP MESSAGE TO A CUSTOMER AND SPENDS AISENSY CREDIT: send the template of a LIVE API campaign to one phone number (a new contact is created if the number is unknown). Not idempotent: every call sends again. template_params must match the template's parameter c

  • aisensy_send_message

    WRITE, SENDS A WHATSAPP MESSAGE TO A CUSTOMER AND MAY SPEND AISENSY CREDIT: send either a free-text message (type=text; WhatsApp only delivers it inside the 24-hour window after the customer last wrote) or an approved template (type=template with template_name, language_code and

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 usefulapi.io 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    101ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 17개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

채팅 및 이메일 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1774개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1774개 중 99%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1774개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

AiSensy MCP by usefulapi, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.16.2)은 오늘 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Vexa, emailmd, MCP WhatsApp Cloud

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Vexa

제작자: Vexa-ai

Meeting bot and transcripts for Google Meet, Teams and Zoom. Live or after, speakers labelled.

클라우드에서 실행★ 2,949Apache-2.02개월 전 업데이트
설치

emailmd

제작자: anypost

Render markdown into email-safe HTML, lint drafts for deliverability problems, and preview emails.

컴퓨터 또는 클라우드★ 1,385MIT31일 전 업데이트
설치

MCP WhatsApp Cloud

제작자: codespar

MCP server for WhatsApp Cloud API (Meta) — messages, media, and templates via Graph API

내 컴퓨터에서 실행★ 277MIT5개월 전 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

AiSensy MCP by usefulapi

Read AiSensy contacts, templates and campaigns; add contacts, send WhatsApp messages on approval.

Live endpoint: https://aisensy.usefulapi.io/mcp · Homepage: https://usefulapi.io/aisensy

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://aisensy.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http aisensy https://aisensy.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "aisensy": { "url": "https://aisensy.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your AiSensy credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/aisensy/

On first connect you'll paste your AiSensy Project API key and project id (AiSensy → Developer → Developer Hub; Pro plan or higher).

Tools

ToolTypeWhat it does
aisensy_get_projectreadGet project
aisensy_list_templatesreadList WhatsApp templates
aisensy_get_templatereadGet WhatsApp template
aisensy_list_campaignsreadList campaigns
aisensy_list_api_campaignsreadList API campaigns
aisensy_get_api_campaignreadGet API campaign
aisensy_get_campaign_analyticsreadGet campaign analytics
aisensy_list_campaign_audiencereadList campaign audience
aisensy_create_api_campaignwriteCreate API campaign
aisensy_find_contactreadFind contact by phone number
aisensy_get_contactreadGet contact
aisensy_create_contactwriteCreate contact
aisensy_update_contactwriteUpdate contact
aisensy_upsert_contactswriteCreate or update contacts in bulk
aisensy_get_messagereadGet message
aisensy_send_campaign_messagewriteSend campaign message
aisensy_send_messagewriteSend WhatsApp message
aisensy_usage_statusmetaUsage status (free-tier meter)
aisensy_request_featuremetaRequest a missing feature
aisensy_upgrademetaUpgrade to Pro or Pro+
aisensy_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with aisensy_upgrade (it returns a Stripe Checkout link). Cancel any time with aisensy_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running aisensy_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by AiSensy.

PopNx에게 묻기