프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Appointedd MCP by usefulapi

제작자: m190버전 1.11.3i★ –i클라우드에서 실행
레지스트리 이름io.usefulapi/appointedd

설치

개요

제작자가 쓴 설명(영어 원문)

Read Appointedd bookings, customers and availability; create, change and cancel bookings.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 3개 중 3개 통과
  • 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
  • 할 수 있는 일 20가지(도구) appointedd_list_bookings, appointedd_list_customers, appointedd_get_customer, appointedd_list_resources …
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://appointedd.usefulapi.io/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http appointedd https://appointedd.usefulapi.io/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "appointedd": {
      "url": "https://appointedd.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "appointedd": {
      "type": "http",
      "url": "https://appointedd.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://appointedd.usefulapi.io/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • appointedd_list_bookings

    List bookings, newest first by default. Filter by time window (after/before), customer, service, resource, category, status or creation/update time. Each booking has its service, resource, start/end, status and the customers on it (with their notes, questions and statuses). Page

  • appointedd_list_customers

    List customers in the CRM: name, email, phone/mobile, address, tags, custom fields, marketing opt-in. Page with `next`. GET /customers.

  • appointedd_get_customer

    One customer by id. GET /customers/{customer_id}.

  • appointedd_list_resources

    List resources (the staff members, rooms or equipment that bookings are made for): name, assigned service ids and resource group ids. Page with `next`. GET /resources.

  • appointedd_list_resource_groups

    List resource groups (id and name). Page with `next`. GET /resources/groups.

  • appointedd_list_services

    List services (what can be booked): name, category, durations and prices, buffers, occupancy and booking type. Page with `next`. GET /services.

  • appointedd_get_service

    One service by id, including its booking questions, durations, prices and buffers. GET /services/{service_id}.

  • appointedd_list_service_categories

    List service categories (id and name). Page with `next`. GET /services/categories.

  • appointedd_get_service_category

    One service category by id. GET /services/categories/{category_id}.

  • appointedd_find_available_intervals

    Find the start times at which a service can be booked in the given ranges, with the free resource ids for each (and existing group bookings with room). Step 1 of making a booking: pick a start, then appointedd_create_reservation. Read-only. POST /availability/intervals/search.

  • appointedd_find_available_dates

    Find which days in the given ranges have any availability for a service (a calendar view; use appointedd_find_available_intervals for the times). Read-only. POST /availability/days/search.

  • appointedd_get_reservation

    One reservation (availability slot) by id: its service, resource, times and expiry. GET /availability/slots/{reservation_id}.

  • appointedd_create_customer

    WRITE: create a customer in the CRM (first and last name required; email, mobile, phone, tags optional). POST /customers.

  • appointedd_update_customer

    WRITE: change a customer's name, email, mobile, phone or tags. Only the fields you pass are sent; `tags` replaces the customer's tag list. PUT /customers/{customer_id}.

  • appointedd_create_reservation

    WRITE: hold a date and time for a booking (step 2). The reservation blocks that slot for `expires_after` minutes (default: the organisation's setting); then call appointedd_create_booking with the returned reservation id. Without resource_id a free resource assigned to the servic

  • appointedd_create_booking

    WRITE: turn an active reservation into a booking (step 3) for one or more customers; Appointedd matches each customer to the CRM by name/email/mobile or creates it. Payment requests are NOT sent unless send_payment_request is true. With an empty customers list an empty booking is

  • appointedd_update_booking

    WRITE: change a booking's service, resource, label or total spaces, or move it by giving `parts` with new start/end times. Customers are NOT emailed unless send_notifications is true. PUT /bookings/{booking_id}.

  • appointedd_update_booking_customer

    WRITE: set the arrival status (Arrived, Complete, No Show, No Status) and/or notes of one customer on a booking. customer_booking_id is the customer's `customer_booking_id` (or `customer_id`) in the booking's customers list. PUT /bookings/{booking_id}/customers/{customer_booking_

  • appointedd_cancel_booking

    WRITE (cannot be undone): cancel a whole booking. Appointedd may notify the customers according to the organisation's settings. To remove one customer from a group booking use appointedd_cancel_booking_customer. POST /bookings/{booking_id}/cancel.

  • appointedd_cancel_booking_customer

    WRITE (cannot be undone): cancel one customer's place on a booking (the booking stays for the others). customer_booking_id is the `customer_booking_id` in the booking's customers list. POST /bookings/{booking_id}/customers/{customer_booking_id}/cancel.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 usefulapi.io 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    48ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 20개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32384개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32384개 중 97%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32384개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Appointedd MCP by usefulapi, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.11.3)은 어제 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, 오늘냥이 (Oneul Nyangi)

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

오늘냥이 (Oneul Nyangi)

제작자: nyangi.today

Real cat photos, diaries, profiles, age and food reference calculators, and breeds.

클라우드에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Appointedd MCP by usefulapi

Read Appointedd bookings, customers and availability; create, change and cancel bookings. Hosted, no local install.

Live endpoint: https://appointedd.usefulapi.io/mcp · Homepage: https://usefulapi.io/appointedd

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://appointedd.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http appointedd https://appointedd.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "appointedd": { "url": "https://appointedd.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Appointedd credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/appointedd/

On first connect you will paste your Appointedd credentials. They are validated, stored per-user, and scoped to you. No keys in config files.

Tools

ToolTypeWhat it does
appointedd_list_bookingsreadList bookings
appointedd_list_customersreadList customers
appointedd_get_customerreadGet customer
appointedd_list_resourcesreadList resources
appointedd_list_resource_groupsreadList resource groups
appointedd_list_servicesreadList services
appointedd_get_servicereadGet service
appointedd_list_service_categoriesreadList service categories
appointedd_get_service_categoryreadGet service category
appointedd_find_available_intervalsreadFind available times
appointedd_find_available_datesreadFind available days
appointedd_get_reservationreadGet reservation
appointedd_create_customerwriteCreate customer
appointedd_update_customerwriteUpdate customer
appointedd_create_reservationwriteCreate reservation (hold a time)
appointedd_create_bookingwriteCreate booking
appointedd_update_bookingwriteUpdate booking
appointedd_update_booking_customerwriteUpdate customer on booking
appointedd_cancel_bookingwriteCancel booking
appointedd_cancel_booking_customerwriteCancel customer on booking
appointedd_usage_statusmetaUsage status (free-tier meter)
appointedd_request_featuremetaRequest a missing feature
appointedd_upgrademetaUpgrade to Pro or Pro+
appointedd_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per account)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with appointedd_upgrade (it returns a Stripe Checkout link). Cancel any time with appointedd_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running appointedd_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT

PopNx에게 묻기