프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

FireText MCP by usefulapi

제작자: m190버전 1.22.3i★ –i클라우드에서 실행
레지스트리 이름io.usefulapi/firetext

설치

개요

제작자가 쓴 설명(영어 원문)

Read FireText credit, messages and reports; send an SMS to up to 10 numbers; manage opt-outs.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 채팅 및 이메일

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 3개 중 3개 통과
  • 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
  • 할 수 있는 일 13가지(도구) firetext_get_credit, firetext_list_received_messages, firetext_list_sent_messages, firetext_get_sent_summary …
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://firetext.usefulapi.io/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http firetext https://firetext.usefulapi.io/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "firetext": {
      "url": "https://firetext.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "firetext": {
      "type": "http",
      "url": "https://firetext.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://firetext.usefulapi.io/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • firetext_get_credit

    Number of SMS credits (messages) remaining on the FireText account or a sub-account. FireText: /credit.

  • firetext_list_received_messages

    Inbound SMS received on the account's FireText numbers/keywords (messageID, sentTo, keyword, receivedFrom, receivedOn, message). Dates YYYY-MM-DD; from="last" returns only what is new since the last call. FireText: /receivedmessages.

  • firetext_list_sent_messages

    Messages (campaigns) sent from the account: messageID, sentOn, sentTo (group), recipientCount, message. The messageID is what the delivery and click reports need. Dates YYYY-MM-DD. FireText: /sentmessages.

  • firetext_get_sent_summary

    Totals for a date range: number of campaigns, recipients and credits used. FireText: /sentreport.

  • firetext_list_scheduled_messages

    Messages queued for later sending (messageID, queuedOn, scheduledFor, recipientCount, sourceAddress, sendTo, message). FireText: /scheduledmessages.

  • firetext_get_delivery_report

    Per-recipient delivery status of one sent message (mobile, names, messageSent, messageUpdate, status: Delivered / Declined / Buffered / Pending with Network / Rejected / Unconfirmed). Give the FireText message id OR the custom reference used when sending. FireText: /deliveryrepor

  • firetext_get_click_report

    Link clicks for one sent message (mobile, names, clicked, userAgent). Only for messages that used FireText's Trackable SMS feature (otherwise the vendor answers URL error). FireText: /clickreport.

  • firetext_get_contact

    Stored details of one contact by mobile number (firstname, lastname, mobile, customField1-3). FireText: /contactinfo.

  • firetext_list_unsubscribed

    Contacts that opted out (names, mobile, custom fields, addedOn, unsubscribedOn, reason). Optional date range and group API id. FireText: /unsubscribed.

  • firetext_list_keywords

    SMS keywords on the account (keywordID, number, keyword, reference). FireText: /keywords.

  • firetext_send_sms

    WRITE, SPENDS MONEY: sends a REAL SMS to real phones and uses the account's SMS credits (one credit per 160 GSM characters per recipient; long and unicode messages cost more). Cannot be undone. At most 10 recipients per call; no groups, templates, scheduling or repeats. Only call

  • firetext_subscribe_contact

    WRITE: adds a contact (by mobile number) to the FireText account, optionally into a group, or with update=true refreshes the names/custom fields of an existing contact. Does not send any SMS. A contact that opted out cannot be re-added this way (they must rejoin by SMS). FireText

  • firetext_unsubscribe_contact

    WRITE: opts a contact out of the FireText account (all groups by default), so it no longer receives group messages. The contact can only rejoin by SMS. Does not send any SMS. FireText: /unsubscribe.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 usefulapi.io 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    30ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 13개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

채팅 및 이메일 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1762개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1762개 중 96%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1762개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

FireText MCP by usefulapi, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.22.3)은 어제 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Vexa, emailmd, MCP WhatsApp Cloud

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Vexa

제작자: Vexa-ai

Meeting bot and transcripts for Google Meet, Teams and Zoom. Live or after, speakers labelled.

클라우드에서 실행★ 2,949Apache-2.02개월 전 업데이트
설치

emailmd

제작자: anypost

Render markdown into email-safe HTML, lint drafts for deliverability problems, and preview emails.

컴퓨터 또는 클라우드★ 1,385MIT30일 전 업데이트
설치

MCP WhatsApp Cloud

제작자: codespar

MCP server for WhatsApp Cloud API (Meta) — messages, media, and templates via Graph API

내 컴퓨터에서 실행★ 277MIT5개월 전 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

FireText MCP by usefulapi

Use FireText from Claude, Cursor, or any MCP client — credit, sent and received messages, delivery and click reports, contacts, and single SMS sends. Hosted, no local install: connect with your own FireText credentials.

Live endpoint: https://firetext.usefulapi.io/mcp · Homepage: https://usefulapi.io/firetext

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://firetext.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http firetext https://firetext.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "firetext": { "url": "https://firetext.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your FireText credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/firetext/

Tools

ToolTypeWhat it does
firetext_get_creditreadGet SMS credit
firetext_list_received_messagesreadList received messages
firetext_list_sent_messagesreadList sent messages
firetext_get_sent_summaryreadGet sent summary
firetext_list_scheduled_messagesreadList scheduled messages
firetext_get_delivery_reportreadGet delivery report
firetext_get_click_reportreadGet click report
firetext_get_contactreadGet contact
firetext_list_unsubscribedreadList unsubscribed contacts
firetext_list_keywordsreadList keywords
firetext_send_smswriteSend SMS
firetext_subscribe_contactwriteAdd or update contact
firetext_unsubscribe_contactwriteUnsubscribe contact
firetext_usage_statusmetaUsage status (free-tier meter)
firetext_request_featuremetaRequest a missing feature
firetext_upgrademetaUpgrade to Pro or Pro+
firetext_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with firetext_upgrade (it returns a Stripe Checkout link). Cancel any time with firetext_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running firetext_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by FireText.

PopNx에게 묻기