프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Qgiv MCP by usefulapi

제작자: m190버전 1.22.3i★ –i클라우드에서 실행
레지스트리 이름io.usefulapi/qgiv

설치

개요

제작자가 쓴 설명(영어 원문)

Read Qgiv (Bloomerang Fundraising) donations, refunds, recurring gifts, P2P registrations, events.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 3개 중 3개 통과
  • 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
  • 할 수 있는 일 21가지(도구) qgiv_list_recent_transactions, qgiv_list_transactions_by_date, qgiv_list_transactions_after_id, qgiv_get_transaction …
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://qgiv.usefulapi.io/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http qgiv https://qgiv.usefulapi.io/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "qgiv": {
      "url": "https://qgiv.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "qgiv": {
      "type": "http",
      "url": "https://qgiv.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://qgiv.usefulapi.io/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • qgiv_list_recent_transactions

    The most recent donations/transactions (newest first as Qgiv returns them): id, status, date, amount, fee, net, donor name and id, form, recurring link, payment type and last four card digits, fund. Donor contact details are left out unless include_contact is set; full card numbe

  • qgiv_list_transactions_by_date

    Transactions between two dates (inclusive), at most 31 days per call, paged with offset/limit. Same fields as qgiv_list_recent_transactions. Qgiv has no server-side paging, so a busy range is fetched whole and sliced; use a shorter range if it is too large. POST /reporting/transa

  • qgiv_list_transactions_after_id

    Transactions with an id greater than the given one, sorted by id ascending and paged with limit; next_after_id is the cursor for the next call (use it as after_id). Handy for syncing new gifts. POST /reporting/transactions/after/{id}.

  • qgiv_get_transaction

    One transaction in full: donation lines, fund/restriction, dedication, custom-field answers, event packages, registrations, refunds. Contact details only with include_contact; card data is reduced to the last four digits. POST /reporting/transactions/{id}.

  • qgiv_list_recent_refunds

    The most recent refunds (read-only): id, original transaction, refund and settle dates, amount, payment type, last four digits, fund. POST /reporting/refunds/last/{limit}.

  • qgiv_list_refunds_by_date

    Refunds between two dates (inclusive), at most 31 days per call, paged with offset/limit. POST /reporting/refunds/dates/{begin}:{end}.

  • qgiv_get_refund

    One refund in full by id (read-only; this server never issues refunds). POST /reporting/refunds/{id}.

  • qgiv_list_recurring_schedules

    Recurring donation schedules (read-only): id, start/end date, next billing date, frequency, amount, state, donor name and id, plus Qgiv's 12-month forecast. Filter by status active, paused, expired or deleted. Paged with offset/limit. POST /reporting/recurring/list or /reporting/

  • qgiv_get_recurring_schedule

    One recurring donation schedule by id (read-only; schedules cannot be changed here). POST /reporting/recurring/{id}.

  • qgiv_list_statements

    Monthly fee/payout statements: id, date, amount contributed, fees, refunded, debited, credited and the summary totals (without the per-transaction rows; use qgiv_get_statement for those). Paged with offset/limit. POST /reporting/statements/list.

  • qgiv_get_latest_statements

    The latest statement(s) for the organization or form, with summary totals (per-transaction rows left out). POST /reporting/statements/latest.

  • qgiv_get_statement

    One statement by id with its transaction rows (first 100 shown; donor names only). POST /reporting/statements/{id}.

  • qgiv_list_recent_registrations

    The most recent peer-to-peer (Hobnob) event registrations: id, category, registrant name, team, fundraising goal and amount raised. Contact details only with include_contact. POST /reporting/registrations/last/{limit}.

  • qgiv_list_registrations_by_date

    Peer-to-peer registrations between two dates (inclusive), at most 31 days per call, paged with offset/limit. POST /reporting/registrations/dates/{begin}:{end}.

  • qgiv_get_registration

    One peer-to-peer registration in full (purchase history, team, totals, child registrations). Contact details only with include_contact. POST /reporting/registrations/{id}.

  • qgiv_list_events

    Events (ticketed/auction events) on the forms the token covers: id, dates and the top-level settings. Set include_details for packages, questions and promo codes. Notification e-mail addresses are never returned. POST /events/list.

  • qgiv_list_pledges

    Pledge options configured on the form(s) (title, value, frequency, begin date, iterations, state), not donors' pledge records. POST /pledges/list.

  • qgiv_get_pledge

    One pledge option by id. POST /pledges/{id} (no package is sent, so nothing is changed).

  • qgiv_list_custom_fields

    Custom (additional-question) fields configured on the form(s): id, reference, title, input type, required flags, display flags. POST /customFields/list.

  • qgiv_list_report_mappings

    Report mappings (accounting export mappings) on the form(s): id, identifier, mapping data, export service, type. POST /reporting/mappings/list.

  • qgiv_get_report_mapping

    One report mapping by id. POST /reporting/mappings/{id}.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 usefulapi.io 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    13ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 21개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32455개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32455개 중 97%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32455개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Qgiv MCP by usefulapi, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.22.3)은 어제 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, SSTracker free youth training

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

SSTracker free youth training

제작자: sstracker.app

Free youth sports drills, practice plans and age-group answers for parents and coaches.

클라우드에서 실행오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Qgiv MCP by usefulapi

Use Qgiv from Claude, Cursor, or any MCP client — donations, refunds, recurring gifts, statements, peer-to-peer registrations, events and pledges, read-only. Hosted, no local install: connect with your own Qgiv credentials.

Live endpoint: https://qgiv.usefulapi.io/mcp · Homepage: https://usefulapi.io/qgiv

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://qgiv.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http qgiv https://qgiv.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "qgiv": { "url": "https://qgiv.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Qgiv credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/qgiv/

Tools

ToolTypeWhat it does
qgiv_list_recent_transactionsreadList recent transactions
qgiv_list_transactions_by_datereadList transactions by date range
qgiv_list_transactions_after_idreadList transactions after an id
qgiv_get_transactionreadGet transaction
qgiv_list_recent_refundsreadList recent refunds
qgiv_list_refunds_by_datereadList refunds by date range
qgiv_get_refundreadGet refund
qgiv_list_recurring_schedulesreadList recurring gift schedules
qgiv_get_recurring_schedulereadGet recurring gift schedule
qgiv_list_statementsreadList statements
qgiv_get_latest_statementsreadGet latest statements
qgiv_get_statementreadGet statement
qgiv_list_recent_registrationsreadList recent P2P registrations
qgiv_list_registrations_by_datereadList P2P registrations by date range
qgiv_get_registrationreadGet P2P registration
qgiv_list_eventsreadList events
qgiv_list_pledgesreadList pledge options
qgiv_get_pledgereadGet pledge option
qgiv_list_custom_fieldsreadList custom fields
qgiv_list_report_mappingsreadList report mappings
qgiv_get_report_mappingreadGet report mapping
qgiv_usage_statusmetaUsage status (free-tier meter)
qgiv_request_featuremetaRequest a missing feature
qgiv_upgrademetaUpgrade to Pro or Pro+
qgiv_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with qgiv_upgrade (it returns a Stripe Checkout link). Cancel any time with qgiv_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running qgiv_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by Qgiv.

PopNx에게 묻기