프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Shippit MCP by usefulapi

제작자: m190버전 1.15.3i★ –i클라우드에서 실행
레지스트리 이름io.usefulapi/shippit

설치

개요

제작자가 쓴 설명(영어 원문)

Get Shippit quotes, track and manage orders; create, label, book and cancel shipments on approval.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 온라인 쇼핑몰 및 결제

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://shippit.usefulapi.io/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http shippit https://shippit.usefulapi.io/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "shippit": {
      "url": "https://shippit.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "shippit": {
      "type": "http",
      "url": "https://shippit.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://shippit.usefulapi.io/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • shippit_get_merchant

    The Shippit merchant account behind this API key: store and company name, contact, preparation time, website and the home (pickup) address with country. GET /merchant.

  • shippit_get_operating_hours

    The store operating hours per weekday (open flag, start and end of the working day) that Shippit uses for pickup and delivery estimates. GET /merchants/settings/locations/operating_hours.

  • shippit_list_webhooks

    The tracking webhooks configured on the account (at most 6): url, the order states that trigger each, whether address or receiver details are hidden, enabled flag. Custom header values are masked by Shippit. GET /merchants/webhooks.

  • shippit_get_quotes

    Ask the carriers enabled on the account for a price and delivery estimate to a destination, for given parcels. Nothing is booked and nothing is charged. Set return_all_quotes to see every carrier instead of only the cheapest or fastest. A 200 can hold per-carrier errors (success

  • shippit_estimate_delivery_dates

    Estimated delivery window (earliest, latest, confidence and a ready-to-show text) per service level (standard, express) between two postcodes, optionally limited to some carriers. Returns an empty list if no carrier is enabled. POST /estimated_delivery_dates.

  • shippit_get_order

    One Shippit order by tracking number: state, courier and price allocated, delivery address, receiver, parcels, products, references and (once booked) manifest id and number. There is no list-orders endpoint in the Shippit API. GET /orders/{tracking_number}.

  • shippit_get_tracking

    The status history of an order (status, date, time, who changed it) and the public tracking page URL to give the recipient. GET /orders/{tracking_number}/tracking.

  • shippit_get_manifest_document

    The booking manifest document for a manifest id (from shippit_book_orders or shippit_get_order): carrier, order count, tracking numbers and a pre-signed PDF URL valid for 7 days. A 422 means the manifest is still generating: retry shortly. GET /book/{manifest_id}/document.

  • shippit_create_order

    WRITE: create a domestic shipping order in Shippit. Shippit then allocates a carrier (your account rules, or the carrier named in courier_allocation) and, unless suppress_communications is true, emails the recipient tracking notifications. Requires confirm: true. Standard, expres

  • shippit_label_order

    WRITE: confirm an order for shipping and fetch its label. This is the Shippit 'label' step: it finalises the carrier and price (the order moves to Ready to Ship) and returns the carrier, tracking and consignment details plus pre-signed PDF URLs (valid 7 days) for the shipping lab

  • shippit_book_orders

    WRITE: book labelled orders with their carriers for pickup (the Shippit 'book' step). Shippit returns one manifest per carrier; the carrier then collects and bills the parcels. Orders must have been labelled first (shippit_label_order). The call fails as a whole when a tracking n

  • shippit_cancel_order

    WRITE: cancel a Shippit order by tracking number (the order ends in state cancelled and cannot be revived; for some carriers Shippit also sends a cancellation request to the carrier). Shippit refuses with a 422 and the reason when the order can no longer be cancelled, for example

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 usefulapi.io 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    101ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 12개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

온라인 쇼핑몰 및 결제 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1743개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1743개 중 94%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1743개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Shippit MCP by usefulapi, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.15.3)은 어제 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spree Commerce: open-source B2B and marketplace ecommerce, Stripe MCP, MCP Cn Commerce

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Stripe MCP

제작자: stripe

MCP server integrating with Stripe - tools for customers, products, payments, and more.

클라우드에서 실행★ 2,043MIT12개월 전 업데이트
설치

MCP Cn Commerce

제작자: TonyWang-hub

8 read-only MCP platform entries; support is operation-specific; merchant live acceptance pending

내 컴퓨터에서 실행★ 96MIT27일 전 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Shippit MCP by usefulapi

Get Shippit quotes, track and manage orders; create, label, book and cancel shipments on approval.

Live endpoint: https://shippit.usefulapi.io/mcp · Homepage: https://usefulapi.io/shippit

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://shippit.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http shippit https://shippit.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "shippit": { "url": "https://shippit.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Shippit credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/shippit/

On first connect you'll paste your Shippit API key and choose the environment (production or staging).

Tools

ToolTypeWhat it does
shippit_get_merchantreadGet merchant account
shippit_get_operating_hoursreadGet store operating hours
shippit_list_webhooksreadList webhooks
shippit_get_quotesreadGet shipping quotes
shippit_estimate_delivery_datesreadEstimate delivery dates
shippit_get_orderreadGet order
shippit_get_trackingreadGet order tracking
shippit_get_manifest_documentreadGet manifest document
shippit_create_orderwriteCreate order
shippit_label_orderwriteLabel order
shippit_book_orderswriteBook orders with carriers
shippit_cancel_orderwriteCancel order
shippit_usage_statusmetaUsage status (free-tier meter)
shippit_request_featuremetaRequest a missing feature
shippit_upgrademetaUpgrade to Pro or Pro+
shippit_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with shippit_upgrade (it returns a Stripe Checkout link). Cancel any time with shippit_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running shippit_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by Shippit.

PopNx에게 묻기