프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Track-POD MCP by usefulapi

제작자: m190버전 1.26.3i★ –i클라우드에서 실행
레지스트리 이름io.usefulapi/track-pod

설치

개요

제작자가 쓴 설명(영어 원문)

Read Track-POD orders, routes, drivers, vehicles and proof of delivery; create orders.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 온라인 쇼핑몰 및 결제

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 3개 중 3개 통과
  • 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
  • 할 수 있는 일 16가지(도구) trackpod_list_orders, trackpod_list_orders_changed_since, trackpod_list_route_orders, trackpod_get_order …
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://track-pod.usefulapi.io/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http track-pod https://track-pod.usefulapi.io/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "track-pod": {
      "url": "https://track-pod.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "track-pod": {
      "type": "http",
      "url": "https://track-pod.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://track-pod.usefulapi.io/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • trackpod_list_orders

    List the orders of one day — by order date (GET /Order/Date/{date}) or by planned route date (GET /Order/Route/Date/{date}) — with optional filters on delivery status, driver and route number. Track-POD returns the whole day at once; this tool pages it (offset/limit) and reports

  • trackpod_list_orders_changed_since

    List orders whose delivery status changed after a moment in the last 24 hours (GET /Order/Status/Date/{date-time}; Track-POD accepts no earlier time than UTC now − 1 day). Good for 'what was delivered / failed since this morning'. Paged here (offset/limit).

  • trackpod_list_route_orders

    List the orders on one route, in route order, by route code (GET /Order/Route/Code/{code}). Paged here (offset/limit).

  • trackpod_get_order

    Get one order with every field: client, address, time slot, goods lines, route, driver, delivery status, ETA, signature/photo links and tracking link. Pass exactly one of number, order_id or track_id (GET /Order/Number|Id|TrackId/{…}). A removed order answers with who removed it

  • trackpod_find_orders_by_number

    List the last 25 orders that share one order number (re-deliveries, repeated jobs) — GET /Order/Number/{number}/List. Use it when an order number was reused and trackpod_get_order returns only one of them.

  • trackpod_get_proof_of_delivery

    Get the electronic proof of delivery (ePOD) of one order: status and status time/GPS, who signed, signature and photo links (valid 24 h), driver comment, reject reasons, delivered vs ordered goods quantities, cash collected, customer feedback and the PDF delivery-note link (Repor

  • trackpod_list_reject_reasons

    List the account's reasons for not delivering / not collecting: site, order, goods and scanning issues (GET /RejectReason).

  • trackpod_list_routes

    List the routes of one day (GET /Route/Date/{date}): code, status (Draft, Ready, Loaded, InProgress, Closed), driver, vehicle, planned vs actual start/finish, distance, cost, current GPS position, and per-route order counts by status. Paged here (offset/limit).

  • trackpod_get_route

    Get one route with its status, driver, vehicle, timings, distance, cost, current GPS position and its orders. Pass exactly one of route_code or route_id (GET /Route/Code|Id/{…}).

  • trackpod_get_route_track

    Get the driver's recorded GPS track of a route (latitude, longitude, speed in m/s, time) — GET /Route/Track/Code|Id/{…}. Pass exactly one of route_code or route_id. Points are paged here (offset/limit, max 1000 per call).

  • trackpod_list_drivers

    List the account's drivers: name, username, phone, vehicle, depot, zone, teams and active flag (GET /Driver). Paged here.

  • trackpod_get_driver

    Get one driver by Track-POD id (UUID) or by username (GET /Driver/Id/{id} or /Driver/Username/{username}). Pass exactly one.

  • trackpod_list_vehicles

    List the account's vehicles: plate number, assigned driver, depot, capacity (weight/volume/pallets/size), limits, costs, type and carrier (GET /Vehicle, optional plate-number filter). Paged here.

  • trackpod_get_vehicle

    Get one vehicle by its Track-POD id (an integer, from trackpod_list_vehicles) — GET /Vehicle/{id}.

  • trackpod_list_vehicle_checks

    Driver vehicle inspections (before/after route): checklist items with pass/fail, notes, photo links (valid 24 h), odometer and signature. date only: every check of that day (GET /VehicleCheck/Date/{date}); date + vehicle_number: that vehicle's checks of the day; vehicle_number on

  • trackpod_create_order

    Create ONE REAL unscheduled order in Track-POD (POST /Order): a delivery or a collection for a client at an address, ready to be planned into a route by a dispatcher. It does not create or optimise routes. Depending on the account's notification settings the customer may later re

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 usefulapi.io 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    35ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 16개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

온라인 쇼핑몰 및 결제 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1743개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1743개 중 92%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1743개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Track-POD MCP by usefulapi, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.26.3)은 어제 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spree Commerce: open-source B2B and marketplace ecommerce, Stripe MCP, MCP Cn Commerce

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Stripe MCP

제작자: stripe

MCP server integrating with Stripe - tools for customers, products, payments, and more.

클라우드에서 실행★ 2,043MIT12개월 전 업데이트
설치

MCP Cn Commerce

제작자: TonyWang-hub

8 read-only MCP platform entries; support is operation-specific; merchant live acceptance pending

내 컴퓨터에서 실행★ 96MIT27일 전 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

Track-POD MCP by usefulapi

Use Track-POD from Claude, Cursor, or any MCP client — read Track-POD orders, routes, drivers, vehicles and proof of delivery; create orders. Hosted, no local install: connect with your own Track-POD credentials.

Live endpoint: https://track-pod.usefulapi.io/mcp · Homepage: https://usefulapi.io/track-pod

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://track-pod.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http track-pod https://track-pod.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "track-pod": { "url": "https://track-pod.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your Track-POD credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/track-pod/

On first connect you'll provide your Track-POD API key. Your credentials are validated, stored per-user, and scoped to you — no keys in config files.

Tools

ToolTypeWhat it does
trackpod_list_ordersreadList orders for a day
trackpod_list_orders_changed_sincereadList orders with a recent status change
trackpod_list_route_ordersreadList the orders of a route
trackpod_get_orderreadGet an order
trackpod_find_orders_by_numberreadFind orders by number
trackpod_get_proof_of_deliveryreadGet proof of delivery
trackpod_list_reject_reasonsreadList reject reasons
trackpod_list_routesreadList routes for a day
trackpod_get_routereadGet a route
trackpod_get_route_trackreadGet a route's GPS track
trackpod_list_driversreadList drivers
trackpod_get_driverreadGet a driver
trackpod_list_vehiclesreadList vehicles
trackpod_get_vehiclereadGet a vehicle
trackpod_list_vehicle_checksreadList vehicle checks
trackpod_create_orderwriteCreate an order
trackpod_usage_statusmetaUsage status (free-tier meter)
trackpod_request_featuremetaRequest a missing feature
trackpod_upgrademetaUpgrade to Pro or Pro+
trackpod_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with trackpod_upgrade (it returns a Stripe Checkout link). Cancel any time with trackpod_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running trackpod_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by Track-POD.

PopNx에게 묻기