프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

WaiverFile MCP by usefulapi

제작자: m190버전 1.14.3i★ –i클라우드에서 실행
레지스트리 이름io.usefulapi/waiverfile

설치

개요

제작자가 쓴 설명(영어 원문)

Read WaiverFile waivers, events, forms and SMS opt-ins; create and update events, invite managers.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 채팅 및 이메일

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 3개 중 3개 통과
  • 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
  • 할 수 있는 일 17가지(도구) waiverfile_get_site, waiverfile_list_waiver_forms, waiverfile_list_events, waiverfile_list_upcoming_events …
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://waiverfile.usefulapi.io/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http waiverfile https://waiverfile.usefulapi.io/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "waiverfile": {
      "url": "https://waiverfile.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "waiverfile": {
      "type": "http",
      "url": "https://waiverfile.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://waiverfile.usefulapi.io/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • waiverfile_get_site

    Details of the WaiverFile site (WaiverSite) this API key belongs to: name, settings and plan information as WaiverFile reports them. GET /GetSiteDetails.

  • waiverfile_list_waiver_forms

    List the waiver forms of the site (name, id, which fields they collect: email, address, phone, date of birth, minimum age, signature). Active forms by default; set include_deleted for all forms including deleted ones. Use the form ids when creating or updating events. GET /GetAct

  • waiverfile_list_events

    List waiver events (a class, tour, party or session that collects waivers) whose date falls in a range, optionally only one event category. Each event has an id, name, start/end, headcount and spots remaining. Dates are UTC. GET /GetEventsByDateRange or /GetEventsByCategory.

  • waiverfile_list_upcoming_events

    List upcoming waiver events between two dates (UTC), for example the next 7 days. GET /GetUpcomingEvents.

  • waiverfile_list_event_categories

    List the event categories of the site (id and name). Use the ids to filter events or to put a new event in a category. GET /GetEventCategories.

  • waiverfile_get_event_waivers

    The waivers collected for one event: who signed, when, and the participants. Personal data of signers. GET /GetWaiversForEvent.

  • waiverfile_search_waivers

    Search signed waivers by free-text terms (a signer's name, email or phone). Personal data of signers. GET /SearchWaivers.

  • waiverfile_get_waiver

    One signed waiver by id: signer, date signed, participants, collected form data, event and the agreement text. Set lite for only the collected form data (no agreement text or event info). Signature and image bytes are never returned. GET /GetWaiver or /GetWaiverLite.

  • waiverfile_find_waivers_by_reference

    Find waivers by the reference ids an outside booking or reservation system attached to them (referenceID1, 2, 3). Give at least one of reference_id_1/2/3, or reference_id_any to match all three fields. GET /GetWaiversByReferenceID.

  • waiverfile_list_waivers

    A page of the waivers signed in a date range. Set lite for only the collected form data (smaller). For a flat export with custom form columns use waiverfile_export_waiver_data; for totals use waiverfile_count_waivers. Personal data of signers. GET /GetAllWaiversByDateRange or /Ge

  • waiverfile_export_waiver_data

    A page of flat waiver rows for a date range (the data behind the WaiverFile export): standard fields, optionally every custom form field as a column, and participants either as one comma-separated column or one row each. Personal data of signers. GET /GetWaiverData.

  • waiverfile_count_waivers

    How many waivers a date range holds: record_count (GetWaiverDataCount, the rows waiverfile_export_waiver_data pages through) and waiver_count (GetAllWaiversByDateRangePageCount, which WaiverFile documents as the number of waivers in the range, used to work out the pages of waiver

  • waiverfile_list_sms_subscribers

    SMS marketing subscribers (phone numbers) that opted in during a date range, or with opted_out set the ones that opted out. Dates are UTC. Personal data. GET /GetSubscribersByDate or /GetOptedOutSubscribersByOptOutDate.

  • waiverfile_create_event

    Create a waiver event (a class, tour or session that collects waivers) with a name and a start/end time (UTC). Optionally an all-day flag, category, location, signing cut-off, participant limit and which waiver forms to attach (default: WaiverFile's own choice, see list_waiver_fo

  • waiverfile_update_event

    Update an existing event. WaiverFile replaces the whole event, so name, start, end and all_day are required and anything left out is reset: category_id empty = no category, waiver_form_ids empty = ALL active forms are attached. Read the event first (waiverfile_list_events) and se

  • waiverfile_invite_event_managers

    SENDS EMAIL: invites people (by email address) to manage one event; they can log in to WaiverFile and see its signers and participants, with the fields set in the account settings. WaiverFile emails each address, with your optional message in the body (skip_email_if_account_exist

  • waiverfile_create_event_category

    Create an event category (a label to group events). Not idempotent: calling twice with the same name creates two categories. POST /InsertEventCategory.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 usefulapi.io 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    163ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 17개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

채팅 및 이메일 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1766개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1766개 중 96%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1766개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

WaiverFile MCP by usefulapi, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.14.3)은 어제 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Vexa, emailmd, MCP WhatsApp Cloud

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Vexa

제작자: Vexa-ai

Meeting bot and transcripts for Google Meet, Teams and Zoom. Live or after, speakers labelled.

클라우드에서 실행★ 2,949Apache-2.02개월 전 업데이트
설치

emailmd

제작자: anypost

Render markdown into email-safe HTML, lint drafts for deliverability problems, and preview emails.

컴퓨터 또는 클라우드★ 1,385MIT31일 전 업데이트
설치

MCP WhatsApp Cloud

제작자: codespar

MCP server for WhatsApp Cloud API (Meta) — messages, media, and templates via Graph API

내 컴퓨터에서 실행★ 277MIT5개월 전 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

WaiverFile MCP by usefulapi

Read WaiverFile waivers, events, forms and SMS opt-ins; create and update events, invite managers.

Live endpoint: https://waiverfile.usefulapi.io/mcp · Homepage: https://usefulapi.io/waiverfile

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://waiverfile.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http waiverfile https://waiverfile.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "waiverfile": { "url": "https://waiverfile.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your WaiverFile credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/waiverfile/

On first connect you'll paste your WaiverFile API key and Site ID (WaiverFile → Settings → API → API keys; click Show to reveal the key, the Site ID is shown below it).

Tools

ToolTypeWhat it does
waiverfile_get_sitereadGet site details
waiverfile_list_waiver_formsreadList waiver forms
waiverfile_list_eventsreadList events by date range
waiverfile_list_upcoming_eventsreadList upcoming events
waiverfile_list_event_categoriesreadList event categories
waiverfile_get_event_waiversreadGet waivers for an event
waiverfile_search_waiversreadSearch waivers
waiverfile_get_waiverreadGet a waiver
waiverfile_find_waivers_by_referencereadFind waivers by reference id
waiverfile_list_waiversreadList waivers by date range
waiverfile_export_waiver_datareadExport waiver data
waiverfile_count_waiversreadCount waivers in a date range
waiverfile_list_sms_subscribersreadList SMS subscribers
waiverfile_create_eventwriteCreate an event
waiverfile_update_eventwriteUpdate an event
waiverfile_invite_event_managerswriteInvite event managers
waiverfile_create_event_categorywriteCreate an event category
waiverfile_usage_statusmetaUsage status (free-tier meter)
waiverfile_request_featuremetaRequest a missing feature
waiverfile_upgrademetaUpgrade to Pro or Pro+
waiverfile_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with waiverfile_upgrade (it returns a Stripe Checkout link). Cancel any time with waiverfile_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running waiverfile_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT © usefulapi. Not affiliated with or endorsed by WaiverFile.

PopNx에게 묻기