프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

WeFile MCP by usefulapi

제작자: m190버전 1.2.3i★ –i클라우드에서 실행
레지스트리 이름io.usefulapi/wefile

설치

개요

제작자가 쓴 설명(영어 원문)

Create and save CT600 filings, generate documents, submit to HMRC and check status in WeFile.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 기타

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://wefile.usefulapi.io/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http wefile https://wefile.usefulapi.io/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "wefile": {
      "url": "https://wefile.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "wefile": {
      "type": "http",
      "url": "https://wefile.usefulapi.io/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://wefile.usefulapi.io/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

도구 이름과 설명은 서버가 2026년 11월 6일에 알려 준 그대로예요. 우리가 아니라 제작자가 쓴 글이고, 일반 텍스트로만 보여 드려요.

  • wefile_list_companies

    List the companies in your WeFile workspace, with their WeFile company id, name, Companies House number and filing count. Start here to find the companyId for other tools. WeFile API: GET /companies.

  • wefile_get_company_periods

    Get the accounting reference date and the accounting periods of one company, with the filed flags and due dates from HMRC and Companies House. Uses Companies House data. WeFile API: GET /company/periods.

  • wefile_add_company

    Add a UK company to your WeFile workspace by its 8-character Companies House number. WeFile fills in the name and address from Companies House. WeFile API: POST /company/add.

  • wefile_list_filings

    List the filings in your WeFile workspace: CT600 returns and Companies House accounts, with their status. WeFile API: GET /filings.

  • wefile_get_filing_status

    Get the overall status of a filing and its submission history. WeFile polls HMRC and Companies House first, so the result shows the latest accept or reject. Use it after wefile_submit_filing. WeFile API: GET /filing/status.

  • wefile_list_submissions

    List the submissions made for a filing to HMRC and Companies House, with their status, HMRC IRmark and body hash. Does not poll the agencies; use wefile_get_filing_status for that. WeFile API: GET /filing/submissions.

  • wefile_list_documents

    List the documents WeFile can generate for a filing (accounts, tax computation, CT600), with whether each is available now. WeFile stores no documents; generate them with wefile_generate_document. WeFile API: GET /filing/document/list.

  • wefile_generate_document

    Generate one filing document from the saved filing data. PDFs come back as base64 text and iXBRL as HTML. Results over 200,000 characters are cut and marked truncated. Filings over 12 months need subPeriod 1 or 2. WeFile API: GET /filing/document/generate.

  • wefile_create_filing

    Create a draft CT600 and Companies House filing for one company and accounting period. Nothing is sent to HMRC or Companies House yet. For an amendment of a WeFile filing, set isAmendment and amendmentOfFilingId. For an amendment of a return filed elsewhere, set isAmendment only:

  • wefile_save_filing

    Save the figures and settings of a draft filing. Set profitLossData and balanceSheetData from the figures the user gives; WeFile computes the totals and the tax. Status in_progress starts the payment step. Send the gateway password and the Companies House code only to wefile_subm

  • wefile_delete_filing_credentials

    Remove the stored HMRC gateway id, gateway password and Companies House code from a filing. Other fields stay. Refused while a submission is in flight. WeFile API: POST /filing/credentials/delete.

  • wefile_submit_filing

    Send a filing to HMRC, Companies House or both. A live key (wf_live_) files a real return, so confirm the figures first; try a test key (wf_test_) before a live one. Pass the gateway credentials here for this call only: WeFile uses them once and does not store them. Check the res

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 usefulapi.io 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • ✓ 통과

    엔드포인트 응답

    13ms 만에 응답(HTTP 200)

  • – 해당 없음

    OAuth로 로그인

    로그인 필요 없음

  • ✓ 통과

    도구 설명에 숨겨진 지시 없음

    도구 설명 12개를 읽었고, AI에게 보내는 숨겨진 지시는 없었어요

기타 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 32380개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 32380개 중 98%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 32380개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

WeFile MCP by usefulapi, 안전한가요?

해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(1.2.3)은 어제 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Spec Driven Development, Remote Desktop Commander, Dechonet MCP

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Spec Driven Development

제작자: formulahendry

MCP Server that facilitates spec-driven development workflows, not just Vibe Coding.

내 컴퓨터에서 실행★ 440MIT14개월 전 업데이트
설치

Remote Desktop Commander

제작자: desktop-commander

Remote Desktop Commander: use files, terminal and processes on your own computers from any AI app.

클라우드에서 실행★ 211어제 업데이트
설치

Dechonet MCP

제작자: node-man

30 security tools for AI agents: phishing links, exposure maps, DNS, SSL, PQC, history, pivots.

컴퓨터 또는 클라우드오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

WeFile MCP by usefulapi

Use your WeFile account from Claude, Cursor, or any MCP client. It lists companies and filings, creates and saves CT600 drafts, generates documents, and submits filings to HMRC and Companies House. Hosted, no local install: connect with your own credentials.

Live endpoint: https://wefile.usefulapi.io/mcp · Homepage: https://usefulapi.io

Connect

  • Claude (claude.ai, Desktop): open Customize → Connectors, click + Add → Add custom connector, and paste https://wefile.usefulapi.io/mcp.
  • Claude Code: claude mcp add --transport http wefile https://wefile.usefulapi.io/mcp, then run /mcp to log in.
  • VS Code: Add to VS Code.
  • Cursor and other clients: add the URL as a remote MCP server:
{

"mcpServers": { "wefile": { "url": "https://wefile.usefulapi.io/mcp" } } }

Add only the URL. Do not add an Authorization header or an API key to the client config: the server signs you in with OAuth, and the login page asks for your WeFile credentials.

Step-by-step setup, where to find your credentials, and FAQ: https://usefulapi.io/wefile/

On first connect you provide your WeFile API key (in the WeFile developer dashboard under API Access; it needs the Developer Package). The server validates it and stores it per user. No keys go in config files.

Tools

ToolTypeWhat it does
wefile_list_companiesreadList companies
wefile_get_company_periodsreadGet accounting periods
wefile_add_companywriteAdd company
wefile_list_filingsreadList filings
wefile_get_filing_statusreadGet filing status
wefile_list_submissionsreadList submissions
wefile_list_documentsreadList documents
wefile_generate_documentreadGenerate document
wefile_create_filingwriteCreate filing
wefile_save_filingwriteSave filing
wefile_delete_filing_credentialswriteDelete stored credentials
wefile_submit_filingwriteSubmit filing
wefile_usage_statusmetaUsage status (free-tier meter)
wefile_request_featuremetaRequest a missing feature
wefile_upgrademetaUpgrade to Pro or Pro+
wefile_cancel_subscriptionmetaCancel the Pro subscription

read tools are read-only; write tools mutate data (clients should confirm them); meta tools report usage, manage your subscription or send a feature request.

Pricing

PlanPriceLimit
Free$050 tool calls / month
Pro (per user)$9/mo or $90/yr (2 months free)Unlimited*

\*Pro has a fair use limit of 10,000 tool calls a month on this server. For more, write to support@usefulapi.io.

Pro covers this server only. Subscribe with wefile_upgrade (it returns a Stripe Checkout link). Cancel any time with wefile_cancel_subscription: Pro continues to the end of the paid period, with no refund for the current period, and running wefile_upgrade before then undoes the cancel. Or write to support@usefulapi.io.

License

MIT — see LICENSE. Documentation only; the server is hosted.

PopNx에게 묻기