프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Vetagent

제작자: jakegu1버전 0.2.0i★ –i클라우드에서 실행
레지스트리 이름dev.vetagent/vetagent

설치

개요

제작자가 쓴 설명(영어 원문)

Pre-trade safety check for AI agents: honeypot, tax, liquidity and rug risk before you buy.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 클라우드에서 실행
  • 전송 방식: Streamable HTTP
  • 카테고리: 회계, 재무 및 세금

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 제작자의 서버에서 실행돼요. 내가 요청한 내용은 제작자의 서버를 거쳐요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

웹, 데스크톱, 모바일의 Claude에서 쓸 수 있어요:

  1. Settings → Connectors 열기
  2. Add custom connector 누르기
  3. 아래 주소를 붙여 넣고 Add 누르기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Add2https://…3
https://vetagent.dev/mcp

터미널에서 이 명령어를 실행하세요

claude mcp add --transport http vetagent https://vetagent.dev/mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "vetagent": {
      "url": "https://vetagent.dev/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "vetagent": {
      "type": "http",
      "url": "https://vetagent.dev/mcp"
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요:

  1. 웹에서 ChatGPT 열기 → Settings → Connectors (Apps)
  2. Create 또는 Add 누르기(일부 요금제는 먼저 Advanced에서 Developer mode를 켜야 해요)
  3. 아래 주소를 붙여 넣고 이름을 정한 뒤 저장하기
  4. 로그인하라고 하면 제작자의 서비스에 로그인하기
SettingsConnectors1+ Create2https://…3
https://vetagent.dev/mcp

메뉴 이름은 요금제나 시기에 따라 조금 다를 수 있어요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

아직 이 서버의 도구 목록을 읽지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 6일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 도메인 vetagent.dev 기준으로 확인되었어요(레지스트리가 도메인 소유를 확인해요)

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    엔드포인트 응답

    아직 점검하지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요

  • … 아직 점검 안 함

    OAuth로 로그인

    아직 점검하지 않았어요. 엔드포인트는 차례대로 돌아가며 점검해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    아직 점검하지 않았어요. 엔드포인트를 점검할 때 도구 목록을 읽어요

회계, 재무 및 세금 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 1720개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 1720개 중 39%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 1720개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Vetagent, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

제작자의 클라우드에서 실행돼요. 설치 없이 인터넷으로 연결하지만, 보내는 내용은 제작자의 서버를 거쳐요.

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.2.0)은 2개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. URL로 연결되기 때문에, 원격 MCP 서버를 지원하는 앱(예: 개발자 모드의 ChatGPT)에서도 쓸 수 있어요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Finance Toolkit, SolidInvoice, Korea Tax Calculator

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Finance Toolkit

제작자: JerBouma

500+ transparent financial methods calculated from raw statements, not third-party endpoints.

컴퓨터 또는 클라우드★ 5,496MIT어제 업데이트
설치

SolidInvoice

제작자: SolidInvoice

Create and send invoices and quotes, manage clients, and track payments in SolidInvoice.

클라우드에서 실행★ 981MIT7일 전 업데이트
설치

Korea Tax Calculator

제작자: UpstageAI

Korean tax calculation and tax-audit judgment MCP: 96 tools with statutory citations.

내 컴퓨터에서 실행★ 97MIT오늘 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

VetAgent

A pre-trade safety check for AI agents. Before an agent buys, holds, or recommends a token, it calls VetAgent and gets an actionable verdict — low / medium / high / unknown — plus the specific signals behind it, instead of a wall of numbers to interpret.

Remote MCP endpoint: `https://vetagent.dev/mcp` · Landing page: https://vetagent.dev Using it, or think it got a token wrong? hello@vetagent.dev — or open an issue.

// assess_token_risk("0x…", chain_hint="ethereum")

{ "risk_level": "medium", "risk_score": 36, "confidence": "high", "signals": [ {"severity": "ok", "name": "Liquidity is adequate", "category": "liquidity"}, {"severity": "ok", "name": "Buys and sells normally", "category": "honeypot"}, {"severity": "warn", "name": "Contract is closed source", "category": "contract"} ], "recommendation": "Medium risk. Real signals fired but none are fatal. Review liquidity, holder distribution and contract permissions before deciding." }


Install

Nothing to install. It is a remote server: no package, no container, no API key, no signup. Add one URL.

Claude Code:

claude mcp add --transport http vetagent https://vetagent.dev/mcp

Cline, Cursor, Claude Desktop, or any other MCP client — add to the MCP config:

{

"mcpServers": { "vetagent": { "type": "http", "url": "https://vetagent.dev/mcp" } } }

Confirm it worked — three tools should come back:

curl -s -X POST https://vetagent.dev/mcp \

-H 'Content-Type: application/json' \ -d '{"jsonrpc":"2.0","id":1,"method":"tools/list"}'

Not using MCP? The same engine answers over plain HTTP: GET https://vetagent.dev/assess/

See llms-install.md for the version written for an agent doing the installing, and docs/AGENT-INTEGRATION.md for how to use the output once connected.


unknown is not low

This is the single most important thing to know about the output.

VetAgent is fail-closed. When a check cannot run — an upstream is down, a buy/sell simulation fails, no liquidity data comes back — it returns unknown and lists exactly what was missing in evidence.data_gaps. It never substitutes an optimistic middle value, and it never sizes a position for you.

confidence measures how complete the input data was, not how safe the token is.

A risk tool that honestly says "I don't know" is useful. One that guesses is not.


Tools

ToolWhat it does
assess_token_risk(address, chain_hint?, verbose?)Full risk profile: liquidity depth, pair age and same-ticker impersonation on all eight chains; sellability simulation, taxes, contract permissions and upstream aggregate verdicts on Ethereum, BSC and Base; mint/freeze authority and Token-2022 extensions on Solana. No holder concentration on any chain yet
get_token_liquidity(address, chain_hint?)Liquidity snapshot for the primary pair, with an explicit status so "upstream failed" is distinguishable from "no pools exist"
find_new_hot_pools(chain?, limit?)Newest / hottest pools on a chain. Discovery only — not a safety endorsement

Pass chain_hint whenever you know it. Ethereum forks such as PulseChain inherit contract addresses, so the same address exists on multiple chains with wildly different prices; the hint removes that ambiguity. (Without it, VetAgent prefers canonical chains — see _CHAIN_RANK in src/risk.py.)

Full agent-facing contract: docs/AGENT-INTEGRATION.md.


Accuracy benchmark

Most token-risk tools publish a feature list. We publish our error rates and the method behind them — including the parts that do not work yet — against labels produced by data sources the engine does not read.

What is measured today: a 1.9% false positive rate on 162 healthy tokens, a 13.0% false-block rate (20 of 154 liquid healthy tokens rated medium or high, which an agent will also refuse), a 20.7% unknown rate, and 21.2% of GoPlus-tagged centralised tokens rated high -- almost all abandoned pools holding cents, not USDT, which is rated low.

What is not measured yet: recall you could rely on. Sampling has turned up 30 dead tokens in 576, because every public source ranks by liquidity and rugged pools fall off the listing entirely, and the adversarial cohort is 17 contracts. Recall on those two small cohorts is published in bench/results.md beside a contract-signals-only column, because most of what they catch is an empty pool rather than a hostile contract. A population-level detection rate waits until the daily snapshot archive matures enough to supply a real cohort. An earlier version of this section claimed "measured recall", which the benchmark file itself contradicted.

→ [`bench/results.md`](bench/results.md) — current numbers, method, and known limits.

Why it is built this way:

  • Independent labels. If the benchmark labelled tokens using honeypot.is — which the engine reads — it would only measure whether VetAgent can relay honeypot.is. Labels come from realized market outcome (price/volume history) and from GoPlus, which is deliberately held out of the engine.
  • A runtime assertion, not a promise. The benchmark records every endpoint each side touched and fails the run if the two sets intersect. A circular benchmark is worse than none, so it is made structurally impossible rather than documented.
  • An ablation column. A token that already collapsed has ~zero liquidity today, so flagging it is close to tautological. Results are therefore reported twice: with all signals, and with only contract signals kept (liquidity, lifecycle, pool-age and impersonation signals removed). The gap is what the engine actually contributes beyond the obvious.
  • `unknown` rate reported alongside recall. A tool that answers unknown to everything has perfect recall and zero value.

The benchmark uses the pinned logical clock 2026-09-21T02:00:00Z. Use an isolated working copy and a matching local cache for reproduction:

python bench/run_benchmark.py --replay

Replay makes no network requests. A missing answer returns exit 4, lists missing URLs, and leaves existing result files unchanged. A complete replay can write bench/results.json and bench/results.md. The cache is not tracked or published with this repository; a fresh clone is not guaranteed to reproduce the published figures.

Plain run mode can fetch missing answers and write dated cache entries. An intentional refresh uses python bench/run_benchmark.py --fill missing-urls.txt with a reviewed explicit HTTPS URL list; it deduplicates the list and skips usable recorded entries. Run a separate --replay afterwards. A pinned logical clock is not a historical measurement of upstream state: new answers can change the results.


Tests

python tests/test_risk.py               # engine regressions, offline, real upstream snapshots

python tests/test_mcp.py # MCP protocol conformance python tests/test_upstream_contract.py # live: every path risk.py reads, against a measured baseline

Every case in tests/ is pinned to a defect that actually reached production.

The contract test earns its keep: VetAgent's worst bug was reading simulationResult.isHoneypot when honeypot.is puts that flag in honeypotResult. The key did not exist, the lookup returned None, it was read as False, and the honeypot check silently passed every token it was ever asked about. No mocked test could have caught that — only one that calls the real API and asserts the shape.

Rule for this repo: a commit that claims to fix something ships with a test that was red before it.


Architecture

Cloudflare Python Worker, no heavy dependencies.

src/

entry.py HTTP routing (entry class must be named Default) risk.py risk engine — assess / liquidity / new_pools mcp_server.py hand-written streamable-http MCP endpoint (JSON-RPC 2.0) landing.html landing page bench/ accuracy benchmark (independent labels + ablation) tests/ regression, protocol, and upstream-contract suites docs/ agent integration guide, handoff, MCP registry manifest

The MCP endpoint is hand-written rather than using the official mcp package: that package pulls in pydantic's C extensions, which do not install on Cloudflare Python Workers. Plain JSON-RPC turned out to be smaller and fully client-compatible.

Data sources

SourceUsed for
DexScreenerpairs, price, liquidity, volume, pair age
GeckoTerminalliquidity fallback, new/trending pools
honeypot.isbuy/sell simulation, taxes, aggregate risk, contract openness -- Ethereum, BSC and Base only
RugCheckSolana rug score, mint/freeze authority, Token-2022 extensions. No holder concentration: the report has carried no holders since 2026-09-19

GoPlus is not used by the engine — it is reserved as the benchmark's held-out oracle. Adding it to the engine requires giving the benchmark a new independent labeller first, or the accuracy numbers stop meaning anything.

Where things are written down

Four documents, one job each. If something is in two of them, one of them is wrong.

DocumentAnswers
README.md (this file)What is this, how do I call it
docs/DECISIONS.mdWhy is it built this way, and what enforces each rule
docs/STRATEGY.mdWho pays, what the moat is, when to shut it down

Why a change was made lives in the commit message, which is immutable and attached to the diff. Why a line of code looks odd lives in a comment next to that line. Neither gets copied into a document, because a copy rots without anyone noticing.

Scope

VetAgent reports observable on-chain risk. It is not financial advice, it does not size positions, and it cannot see off-chain risk — team behaviour, social engineering, or a rug executed through governance. Treat low as "no fatal signal found in the checks that ran", never as "safe to buy".

License

MIT — see LICENSE.

PopNx에게 묻기