프로토타입 · 미리 보기: 공식 레지스트리의 모든 서버를 담고 있으며 30분마다 동기화해요. 리뷰와 계정 기능은 다음 단계에서 열려요.
PopNx MCPAI를 쓰는 사람을 위한 MCP 서버 · 쉬운 말로 설명해요

Pseudonym MCP

제작자: woladi버전 0.9.0i★ –i내 컴퓨터에서 실행
레지스트리 이름io.github.woladi/pseudonym-mcp

설치

개요

제작자가 쓴 설명(영어 원문)

Locally pseudonymizes sensitive text before cloud LLM work and restores the tokens afterward.

PopNx MCP의 세 기둥

이 세 가지는 절대 하나의 점수로 합치지 않아요. 의견, 측정, 인기는 서로 다른 것이니까요.

할 수 있는 일

이 서버는 아직 쉬운 말로 된 요약을 쓰지 못했어요. 아래는 레지스트리에서 읽어 온 사실이에요.

  • 연결 방식: 내 컴퓨터에서 실행
  • 전송 방식: stdio
  • 카테고리: 검색 및 AI 기억

설치

쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.

설치하기 전에

  • 기본 점검: 1개 중 1개 통과
  • 내 컴퓨터에서 내 사용자 계정의 권한(파일, 네트워크, 앱)으로 실행돼요.
  • 레지스트리에 입력해야 할 키가 나와 있지 않아요.

필요한 것

  • npmNode.js 설치(npx 명령어용)

어떤 앱을 쓰세요?

위에서 앱을 고르세요. 기억해 두었다가 다음부터는 버튼에 “…에 설치”라고 표시해요.

Claude Desktop → Settings → Developer → Edit Config를 열고 claude_desktop_config.json에 이 내용을 붙여 넣으세요

{
  "mcpServers": {
    "pseudonym": {
      "command": "npx",
      "args": [
        "-y",
        "pseudonym-mcp"
      ]
    }
  }
}

터미널에서 이 명령어를 실행하세요

claude mcp add pseudonym -- npx -y pseudonym-mcp

Cursor에서 열기

또는 설정을 직접 복사하기

프로젝트의 .cursor/mcp.json 또는 ~/.cursor/mcp.json에 붙여 넣으세요

{
  "mcpServers": {
    "pseudonym": {
      "command": "npx",
      "args": [
        "-y",
        "pseudonym-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

VS Code에서 열기

또는 설정을 직접 복사하기

프로젝트의 .vscode/mcp.json에 붙여 넣으세요

{
  "servers": {
    "pseudonym": {
      "type": "stdio",
      "command": "npx",
      "args": [
        "-y",
        "pseudonym-mcp"
      ]
    }
  }
}

브라우저가 앱을 열지 물어본 다음, 앱이 설정을 보여 주고 확인을 요청해요. 키 값은 비워 두니 직접 입력하세요.

이 서버는 내 컴퓨터에서 실행되는데, ChatGPT는 인터넷에 있는 서버에만 연결할 수 있어요. 다른 앱을 고르세요.

선택한 앱은 이 기기의 쿠키에만 저장돼요. 계정은 필요 없어요.

이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.

할 수 있는 일

내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.

기본 점검i

누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 7일 점검

  • ✓ 통과

    제작자와 저장소 일치

    레지스트리 이름이 GitHub 계정 woladi 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요

  • … 아직 점검 안 함

    계속 관리되고 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • … 아직 점검 안 함

    라이선스 있음

    아직 GitHub에서 이 저장소를 읽어 오지 않았어요

  • – 해당 없음

    엔드포인트 응답

    내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요

  • – 해당 없음

    OAuth로 로그인

    내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요

  • … 아직 점검 안 함

    도구 설명에 숨겨진 지시 없음

    내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요

검색 및 AI 기억 카테고리의 다른 서버와 비교i

  • 이 카테고리의 다른 서버 7258개 중 0%보다 스타가 많아요
  • 이 카테고리의 다른 서버 7258개 중 33%보다 최근에 레지스트리에 공개됐어요
  • 기본 점검 결과가 이 카테고리의 다른 서버 7258개 중 100%와 같거나 더 좋아요

레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.

자주 묻는 질문

Pseudonym MCP, 안전한가요?

해당하는 기본 점검 1개 중 1개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.

어떤 키나 코드가 필요한가요?

레지스트리에 필수 키가 나와 있지 않아요. 다만 처음 쓸 때 로그인을 요구하는 서버도 있어요.

내 컴퓨터에서 실행되나요, 클라우드에서 실행되나요?

내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).

아직 관리되고 있나요?

GitHub 저장소는 마지막으로 – 변경됐고, 최신 버전(0.9.0)은 2개월 전 레지스트리에 올라왔어요.

어떤 앱에서 쓸 수 있나요?

Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Node.js도 있어야 해요.

대신 쓸 수 있는 건 뭐가 있나요?

같은 카테고리에는: Context7, Codebase Memory, Exa

대안

같은 카테고리에서 다른 제작자가 만든 서버예요. 스타 순으로 정렬했어요.

카드 보는 법:★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i

Context7

제작자: upstash

Up-to-date docs for AI agents

컴퓨터 또는 클라우드★ 64,224MIT오늘 업데이트
설치

Codebase Memory

제작자: DeusData

Codebase knowledge graph for AI agents — 162 languages, sub-ms queries, 99% fewer tokens.

내 컴퓨터에서 실행★ 48,148MIT20일 전 업데이트
설치

Exa

제작자: exa-labs

Connect AI agents to Exa for web search, content fetching, and multi-step research.

클라우드에서 실행★ 5,213MIT지난달 업데이트
설치

제작자의 README

README 열기

제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.

pseudonym-mcp

Local pseudonymisation tools for LLM workflows — replace detected PII with opaque tokens before you hand text to a cloud LLM, then restore those tokens afterward.

Expose MCP tools (mask_text and unmask_text) that your client or agent can call as an explicit privacy step. The server detects PII locally, replaces it with opaque tokens, and keeps the token mapping in memory for later restoration.

It is a defense-in-depth measure, not a compliance silver bullet. Read the Limitations and GDPR & AI Compliance sections before assuming this stack does more than it does.

What you get

  • 46 recognizers across twelve locales, all of them live by default: Poland (PESEL, NIP, REGON, dowód, paszport, księga wieczysta), the EU (IBAN with mod-97, VAT for all 27 member states, plus DE, IT, ES, FR, NL, CZ/SK, SE, FI and UK national IDs) and the US (SSN, ITIN, EIN, ABA routing, cards). 24 of them verify a real check digit. --lang narrows that set when you want fewer false positives — see Locale coverage is fail-closed. Heuristic language detection (detectLanguage()) infers the language from text content — --lang remains the authoritative override.
  • Hybrid NER engine: Regex for structured PII (SSN, credit cards, IBAN, email, phone) + local Ollama LLM for unstructured entities (names, organisations).
  • Local-detection architecture: Detection and substitution happen on your machine when the MCP tool is called. The cloud LLM call still happens (that's the point) — but it can see tokens instead of detected PII when your workflow uses the masked output.
  • Session-keyed mapping store: Tokens like [PERSON:1] map back to originals in an isolated, per-request session. Multiple round-trips preserve token coherence.
  • Unmask workflow support: mask_text returns auto_unmask for clients that want to honor that preference, but this server does not intercept arbitrary LLM responses automatically.
  • Flexible engines: Run regex only (no Ollama required), llm only, or hybrid (default).
  • Strict validation: SSN area-number validation, credit card Luhn checksum, PESEL checksum — all configurable.
  • Graceful degradation: If Ollama is unavailable, the regex phase still runs and no exception is thrown.
  • MCP-native: Works with Claude Code, Claude Desktop, Cursor — any MCP-compatible client.

❌ Without / ✅ With

❌ Without pseudonym-mcp:

  • Prompt: "John Smith, SSN 123-45-6789, card 4111 1111 1111 1111" → sent verbatim to the LLM provider
  • Every name, ID number, and credit card in your prompt is processed and potentially logged by the provider
  • A breach at the provider's end exposes those values in cleartext
  • Sending personal data to a non-EU LLM provider without further safeguards raises GDPR Article 44 questions you'll need to answer

✅ With pseudonym-mcp used before the cloud call:

  • The same prompt can become "[PERSON:1], SSN [SSN:1], card [CREDIT_CARD:1]" when you call mask_text first
  • The LLM reasons about structure and content without seeing those detected values in cleartext
  • The response can be locally de-tokenised with unmask_text before reaching the user
  • Detected direct identifiers are no longer shipped upstream — though structure, dates, indirect references, and any missed PII still are

This is a meaningful reduction in cleartext PII exposure. It is not "no personal data leaves your machine" — see Limitations.

GDPR & AI Compliance

pseudonym-mcp is relevant to compliance work, but it is a technical control, not a compliance product. Whether you are compliant with any specific regulation depends on your full stack, your role (controller/processor), your contracts, your DPIA, and your jurisdiction.

Why this matters

The EU General Data Protection Regulation (GDPR) classifies names, national ID numbers (like SSN or PESEL), bank account numbers (IBAN), email addresses, credit card numbers, and phone numbers as personal data under Article 4(1). Sending this data to a cloud LLM provider constitutes processing under Article 4(2). Pseudonymisation is explicitly recognised under Art. 4(5) as a risk-reduction measure — but, critically, pseudonymised data is still personal data (Recital 26).

GDPR ArticleObligationWhere pseudonym-mcp helpsWhere it doesn't
Art. 5(1)(c)Data minimisationStrips detected direct identifiers before transmissionDoesn't minimise context, structure, or undetected PII
Art. 25Privacy by design and by defaultProvides a technical layer that fits into a privacy-by-design architectureArchitecture and policy decisions are still your responsibility
Art. 32Security of processingRecognised technical measure under Recital 83 (pseudonymisation)One control among many; doesn't replace access control, logging, encryption
Art. 44Transfers to third countriesReduces the cleartext PII you transferPseudonymised personal data is still personal data — transfer rules still apply
Art. 4(5)Pseudonymisation definitionThe mapping store is opaque to the cloud LLM; re-identification requires the local sessionRe-identification is possible from context for anyone with side knowledge

The honest bottom line: pseudonymisation under GDPR Art. 4(5) is not anonymisation. The data remains personal data in your system, and Art. 44 transfer obligations are not switched off just because you tokenised the name field.

AI Act alignment

The EU AI Act places additional requirements on high-risk AI systems that process personal data. Using pseudonym-mcp as an intermediary layer can:

  • Support data minimisation in your AI system's data flows.
  • Help document a technical control for transparency and human-oversight requirements.
  • Align with the principle of technical robustness and safety (Art. 15) by limiting cleartext PII exposure.

It does not change your AI Act risk classification on its own — classification is a function of use-case and deployment context, not of the masking step in front of the model.

US & international applicability

The tool is also relevant outside the EU, with the same caveats:

  • CCPA / CPRA (California) — reduces personal information sent to third-party processors; doesn't change controller/business obligations or consumer rights.
  • HIPAA (US healthcare) — pseudonymised PHI is still PHI under HIPAA. Using this tool does not eliminate the need for a BAA with your cloud LLM provider if you're a covered entity or business associate. It can be part of a defensible safeguard posture; it cannot substitute for one.
  • PCI DSS (payment industry) — Luhn-validated detection reduces the chance card numbers ride in cleartext to an LLM. It is one control; PCI scope, segmentation, and storage rules are separate concerns.
  • SOC 2 — useful evidence of a technical control limiting PII exposure. Auditors will look at the full picture, not just this layer.
  • PIPEDA (Canada), LGPD (Brazil), POPIA (South Africa) — all require appropriate safeguards for cross-border personal data transfers. This tool is a relevant safeguard, not a substitute for the legal basis of the transfer.
Sector-specific applicability
SectorRelevant regulationPII types commonly handled
HealthcareGDPR + HIPAA + national health data lawsPatient names, SSN, diagnoses
Banking & FinanceGDPR + PCI DSS + PSD2 + DORACredit cards, IBAN, SSN, PESEL
HR & RecruitmentGDPR Art. 9 (special categories)Names, national IDs, contact details
LegalGDPR + attorney–client privilegeNames, case numbers, personal details
InsuranceGDPR + Solvency IIPersonal identifiers, health data
Public Sector (US)CCPA + state privacy lawsSSN, driver's license numbers
Public Sector (PL)GDPR + UODO + KRIPESEL, NIP, REGON

In every row of this table, pseudonym-mcp is a useful building block. None of those regimes can be satisfied by a masking tool alone.

How it works

Your App / Claude Desktop

│ │ explicit mask_text tool call with PII ▼ ┌─────────────────────────┐ │ pseudonym-mcp │ │ │ │ Phase 1: Pattern NER │ ← 46 rules: national IDs, tax numbers, │ │ IBAN, VAT, cards, wallets, devices │ │ scored, checksum-verified, context-aware │ Phase 2: Ollama NER │ ← PERSON, ORG (local LLM) │ MappingStore (session) │ ← [TAG:N] ↔ original value └────────────┬────────────┘ │ masked text returned to the client/agent ▼ Your workflow sends the masked text ▼ Cloud LLM API (Claude / GPT-4 / Gemini) │ │ response with [TAG:N] tokens ▼ ┌─────────────────────────┐ │ pseudonym-mcp │ │ unmask_text / revert │ ← tokens → originals └────────────┬────────────┘ │ restored response ▼ Your App / User

Token format
US / English identifiers (en pack):

[PERSON:1] John Smith [SSN:1] 123-45-6789 [CREDIT_CARD:1] 4111 1111 1111 1111 [ORG:1] Acme Corp [EMAIL:1] john@acme.com [PHONE:1] (555) 123-4567

Polish identifiers (pl pack): [PERSON:1] Jan Kowalski [PESEL:1] 90010112318 [ORG:1] Auto-Lux [NIP:1] 526-000-00-05 [REGON:1] 123456785 [IBAN:1] PL27114020040000300201355387 [EMAIL:1] jan@example.pl [PHONE:1] +48 123 456 789

The mapping is stored in a session-scoped in-memory store. Each mask_text call returns a session_id; pass it back to unmask_text to restore originals.

Real-world example

Meeting note in Claude Code / Obsidian

You have a note:

Meeting with Jan Kowalski (PESEL: 90010112318) from Acme sp. z o.o.

We discussed a contract for 45 000 zł. Contact: jan.kowalski@acme.pl

In Claude Code you type:

Use mask_text on this note, then summarise the key points of the meeting.

**First, call mask_text; pseud

앞부분만 보여 드려요. 나머지는 저장소에서 읽어 보세요

PopNx에게 묻기