World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
MCP server for Alloy Navigator's REST API - IT asset management and ITSM data for MSPs.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 0/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 12/100 |
품질: 기본 점검 2/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Alloy Navigator 설치해 줘. https://mcp.popnx.com/i/wyre-ai-alloy-navigator-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 2/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
Alloy Navigator 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (ALLOY_BASE_URL) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Alloy Navigator을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "alloy-navigator": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "ALLOY_BASE_URL", "-e", "ALLOY_CLIENT_ID", "-e", "ALLOY_CLIENT_SECRET", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/alloy-navigator-mcp:v1.0.1" ], "env": { "ALLOY_BASE_URL": "your-value", "ALLOY_CLIENT_ID": "your-value", "ALLOY_CLIENT_SECRET": "your-value", "AUTH_MODE": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) ALLOY_CLIENT_ID, ALLOY_CLIENT_SECRET, AUTH_MODE, ALLOY_BASE_URL에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Alloy Navigator의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
ALLOY_BASE_URL Base URL of the Alloy Navigator server this connector talks to, e.g. https://alloy.example.com. Every Alloy Navigator instance is self-hosted (on-prem or self-hosted-cloud); there is no shared hosted…설명은 아직 영어 원문입니다.
SettingsDeveloperEdit Config
{
"mcpServers": {
"alloy-navigator": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"ALLOY_BASE_URL",
"-e",
"ALLOY_CLIENT_ID",
"-e",
"ALLOY_CLIENT_SECRET",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/alloy-navigator-mcp:v1.0.1"
],
"env": {
"ALLOY_BASE_URL": "your-value",
"ALLOY_CLIENT_ID": "your-value",
"ALLOY_CLIENT_SECRET": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Alloy Navigator을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Alloy Navigator을 쓰고 있다고 하거나 답에 Alloy Navigator 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT 서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다. LOG_LEVEL 로그 상세 수준: debug, info, warn, error 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Alloy Navigator에 연결할 수 없어요
Alloy Navigator는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Alloy Navigator에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
Alloy Navigator 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (ALLOY_BASE_URL) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Alloy Navigator을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user alloy-navigator --env ALLOY_BASE_URL=your-value --env ALLOY_CLIENT_ID=your-value --env ALLOY_CLIENT_SECRET=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e ALLOY_BASE_URL -e ALLOY_CLIENT_ID -e ALLOY_CLIENT_SECRET -e AUTH_MODE ghcr.io/wyre-ai/alloy-navigator-mcp:v1.0.1 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) ALLOY_CLIENT_ID, ALLOY_CLIENT_SECRET, AUTH_MODE, ALLOY_BASE_URL에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Alloy Navigator의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
ALLOY_BASE_URL Base URL of the Alloy Navigator server this connector talks to, e.g. https://alloy.example.com. Every Alloy Navigator instance is self-hosted (on-prem or self-hosted-cloud); there is no shared hosted…설명은 아직 영어 원문입니다.
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user alloy-navigator --env ALLOY_BASE_URL=your-value --env ALLOY_CLIENT_ID=your-value --env ALLOY_CLIENT_SECRET=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e ALLOY_BASE_URL -e ALLOY_CLIENT_ID -e ALLOY_CLIENT_SECRET -e AUTH_MODE ghcr.io/wyre-ai/alloy-navigator-mcp:v1.0.1Enter 전에 “your-value”를 내 키로 바꾸세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Alloy Navigator이 목록에 있고 연결됨으로 보이면 돼요
Alloy Navigator을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Alloy Navigator을 쓰고 있다고 하거나 답에 Alloy Navigator 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT 서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다. LOG_LEVEL 로그 상세 수준: debug, info, warn, error 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
Alloy Navigator 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (ALLOY_BASE_URL) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Alloy Navigator을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "alloy-navigator": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "ALLOY_BASE_URL", "-e", "ALLOY_CLIENT_ID", "-e", "ALLOY_CLIENT_SECRET", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/alloy-navigator-mcp:v1.0.1" ], "env": { "ALLOY_BASE_URL": "your-value", "ALLOY_CLIENT_ID": "your-value", "ALLOY_CLIENT_SECRET": "your-value", "AUTH_MODE": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) ALLOY_CLIENT_ID, ALLOY_CLIENT_SECRET, AUTH_MODE, ALLOY_BASE_URL에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Alloy Navigator의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
ALLOY_BASE_URL Base URL of the Alloy Navigator server this connector talks to, e.g. https://alloy.example.com. Every Alloy Navigator instance is self-hosted (on-prem or self-hosted-cloud); there is no shared hosted…설명은 아직 영어 원문입니다.
Alloy Navigator 설정에서 ALLOY_CLIENT_ID, ALLOY_CLIENT_SECRET, AUTH_MODE, ALLOY_BASE_URL가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Alloy Navigator을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Alloy Navigator을 쓰고 있다고 하거나 답에 Alloy Navigator 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT 서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다. LOG_LEVEL 로그 상세 수준: debug, info, warn, error 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
Alloy Navigator 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (ALLOY_BASE_URL) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Alloy Navigator을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "alloy-navigator": { "type": "stdio", "command": "docker", "args": [ "run", "-i", "--rm", "-e", "ALLOY_BASE_URL", "-e", "ALLOY_CLIENT_ID", "-e", "ALLOY_CLIENT_SECRET", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/alloy-navigator-mcp:v1.0.1" ], "env": { "ALLOY_BASE_URL": "your-value", "ALLOY_CLIENT_ID": "your-value", "ALLOY_CLIENT_SECRET": "your-value", "AUTH_MODE": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) ALLOY_CLIENT_ID, ALLOY_CLIENT_SECRET, AUTH_MODE, ALLOY_BASE_URL에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Alloy Navigator의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
ALLOY_BASE_URL Base URL of the Alloy Navigator server this connector talks to, e.g. https://alloy.example.com. Every Alloy Navigator instance is self-hosted (on-prem or self-hosted-cloud); there is no shared hosted…설명은 아직 영어 원문입니다.
Alloy Navigator 설정에서 ALLOY_CLIENT_ID, ALLOY_CLIENT_SECRET, AUTH_MODE, ALLOY_BASE_URL가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Alloy Navigator을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Alloy Navigator을 쓰고 있다고 하거나 답에 Alloy Navigator 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT 서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다. LOG_LEVEL 로그 상세 수준: debug, info, warn, error 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
Claude Code
claude mcp add --scope user alloy-navigator --env ALLOY_BASE_URL=your-value --env ALLOY_CLIENT_ID=your-value --env ALLOY_CLIENT_SECRET=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e ALLOY_BASE_URL -e ALLOY_CLIENT_ID -e ALLOY_CLIENT_SECRET -e AUTH_MODE ghcr.io/wyre-ai/alloy-navigator-mcp:v1.0.1Claude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"alloy-navigator": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"ALLOY_BASE_URL",
"-e",
"ALLOY_CLIENT_ID",
"-e",
"ALLOY_CLIENT_SECRET",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/alloy-navigator-mcp:v1.0.1"
],
"env": {
"ALLOY_BASE_URL": "your-value",
"ALLOY_CLIENT_ID": "your-value",
"ALLOY_CLIENT_SECRET": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"alloy-navigator": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"ALLOY_BASE_URL",
"-e",
"ALLOY_CLIENT_ID",
"-e",
"ALLOY_CLIENT_SECRET",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/alloy-navigator-mcp:v1.0.1"
],
"env": {
"ALLOY_BASE_URL": "your-value",
"ALLOY_CLIENT_ID": "your-value",
"ALLOY_CLIENT_SECRET": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}VS Code (mcp.json)
{
"servers": {
"alloy-navigator": {
"type": "stdio",
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"ALLOY_BASE_URL",
"-e",
"ALLOY_CLIENT_ID",
"-e",
"ALLOY_CLIENT_SECRET",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/alloy-navigator-mcp:v1.0.1"
],
"env": {
"ALLOY_BASE_URL": "your-value",
"ALLOY_CLIENT_ID": "your-value",
"ALLOY_CLIENT_SECRET": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}ALLOY_BASE_URL 필수 envALLOY_CLIENT_ID 비밀 필수 envALLOY_CLIENT_SECRET 비밀 필수 envMCP_TRANSPORT envAUTH_MODE 비밀 필수 envLOG_LEVEL env설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
레지스트리 이름이 GitHub 계정 WYRE-AI 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 6일 전
GitHub가 라이선스 종류를 알아내지 못했어요. 파일을 열어 확인하세요
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/wyre-ai-alloy-navigator-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 2개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
입력해야 할 값: ALLOY_CLIENT_ID, ALLOY_CLIENT_SECRET, AUTH_MODE
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 6일 전 변경됐고, 최신 버전(1.0.1)은 33일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 Alloy Navigator | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 예 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 2/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | NOASSERTION | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
MCP server for Alloy Navigator's REST API - IT asset management, ITSM, and network inventory data (incidents, work orders, assets, software catalog, consumables, and more) for AI assistants and the WYRE Conduit gateway.
Alloy Navigator authenticates third-party applications with the OAuth2 client_credentials grant. An application account is registered in the Alloy Navigator Settings App under Services > API > Applications, which issues a client ID and client secret. This connector exchanges those for a bearer access token by POSTing to /api/token, then sends Authorization: Bearer on every subsequent request. Access tokens are valid for 8 hours per Alloy Navigator's own documentation; this connector caches a token per credential set and transparently re-authenticates once it's near expiry (see src/auth.ts).
Alloy Navigator has no fixed hosted API endpoint - every instance (on-premises, or a customer's own self-hosted-cloud tenant) is deployed at its own base URL, so this connector requires all three of a base URL, a client ID, and a client secret. In gateway mode all three arrive per-request via the X-Alloy-Base-Url, X-Alloy-Client-Id, and X-Alloy-Client-Secret headers; in local/stdio mode they're read once from ALLOY_BASE_URL, ALLOY_CLIENT_ID, and ALLOY_CLIENT_SECRET.
Alloy Navigator's API module (and this connector's application-account grant type specifically) requires the API Module to be installed and enabled on the target instance - see Alloy Navigator's own Installation Guide ("Installing and Configuring the API Module") if a client_credentials request returns a connection or 404 error rather than an auth error.
Vendor-documented, not independently verified against a live account (see Verification below for why): Alloy Navigator's API User's Guide describes application accounts as accounts used by "third-party applications that run without a signed-in user present," distinct from a regular technician (username/password) account, but does not document a way to scope an application account's *read* access below whatever object classes and fields the account otherwise has permission to see in Alloy Navigator's own security/role configuration. In practice this means the actual read-only guarantee is enforced by this connector's tool surface (GET-only, no workflow-action execution), not by the credential itself - Alloy Navigator's own workflow-action model means even a technically "read" API call executes through the same account whose role could, in principle, also be granted write/workflow-action permissions elsewhere. Customers should create a dedicated, minimally-privileged application account for this connector, matching the same practice recommended by other vendors in this fleet (e.g. PRTG) whose API keys inherit the creating account's full permission set.
This connector was built directly against Alloy Navigator's official API User's Guide (docs.alloysoftware.com/alloynavigator/docs/api-userguide/), not against secondary documentation or a naming convention - every tool below maps to one real, documented GET operation, with its exact query parameters and response shape verified against the guide's own worked examples (see each tool's JSDoc in src/client.ts for the source example it was checked against). What it is not is independently verified against a live Alloy Navigator instance: Alloy Navigator does not publish a public self-serve trial or sandbox instance, and provisioning one requires a live sales/licensing engagement this build environment could not complete. This is a build-environment limitation, not a vendor-side approval gate for a customer with an existing license.
| Env var | Description | |||
|---|---|---|---|---|
ALLOY_BASE_URL | Base URL of the Alloy Navigator server, e.g. https://alloy.example.com. | |||
ALLOY_CLIENT_ID | Application account client ID, issued under Settings App > Services > API > Applications. | |||
ALLOY_CLIENT_SECRET | Application account client secret, issued alongside the client ID. | |||
MCP_TRANSPORT | stdio (default) or http. | |||
AUTH_MODE | env (default, reads the vars above) or gateway (credentials arrive per-request via the X-Alloy-Base-Url / X-Alloy-Client-Id / X-Alloy-Client-Secret headers, injected by the Conduit gateway). The Docker image and Compose file default to gateway. In gateway mode, /mcp returns 401 when any of those headers is missing and never falls back to ALLOY_*. | |||
CONDUIT_S2S_SECRET | Required for HTTP. Service-to-service secret. The HTTP server logs an error and exits non-zero when this is empty or a known placeholder (changeme, secret, placeholder, your-s2s-secret, replace-with-a-real-secret, and the same list in src/http.ts). Compose will not start when it is unset. Never commit a real value. The process never logs it. | |||
MCP_ALLOW_INSECURE_DEV | Set to exactly 1 only for local development to start HTTP without CONDUIT_S2S_SECRET. The process logs a warning, skips X-Gateway-S2S, and listens on 127.0.0.1 only. A wider MCP_HTTP_HOST is overridden. A known placeholder secret is still refused. | |||
MCP_HTTP_HOST | Bind address when MCP_TRANSPORT=http. Defaults to 127.0.0.1. A configured CONDUIT_S2S_SECRET honors this value, including 0.0.0.0. The container image sets 0.0.0.0. Without a secret, the listener is 127.0.0.1 only. | |||
MCP_HTTP_PORT | HTTP port. Defaults to 8080. | |||
LOG_LEVEL | debug \ | info (default) \ | warn \ | error. |
/health stays unauthenticated and does not read credentials. The stdio transport does not use CONDUIT_S2S_SECRET.
With MCP_TRANSPORT=http and CONDUIT_S2S_SECRET set, every /mcp request must include X-Gateway-S2S. A missing or invalid header returns 401 before any vendor credential is read.
The header is an HMAC proof, not a copy of the secret:
t=<unix seconds>,v1=<hex hmac-sha256>
is HMAC-SHA256 of the ASCII string t= (the same t= prefix and the same decimal timestamp), keyed with CONDUIT_S2S_SECRET, encoded as lowercase hex. The timestamp must be within 300 seconds of the server clock.
import { createHmac } from 'node:crypto';
const secret = process.env.CONDUIT_S2S_SECRET; const t = Math.floor(Date.now() / 1000); const v1 = createHmac('sha256', secret).update(t=${t}).digest('hex'); const xGatewayS2s = t=${t},v1=${v1};
In AUTH_MODE=gateway, /mcp also requires X-Alloy-Base-Url, X-Alloy-Client-Id, and X-Alloy-Client-Secret. Those headers are the only credential source for that request.
await fetch('http://127.0.0.1:8080/mcp', {
method: 'POST', headers: { 'content-type': 'application/json', accept: 'application/json, text/event-stream', 'x-gateway-s2s': xGatewayS2s, 'x-alloy-base-url': 'https://alloy.example.com', 'x-alloy-client-id': 'application-client-id', 'x-alloy-client-secret': 'application-client-secret', }, body: JSON.stringify({ jsonrpc: '2.0', id: 1, method: 'tools/list' }), });
Alloy Navigator's API is class-generic rather than one fixed REST path per object type (unlike, say, PRTG's /devices, /sensors, etc.) - a single object class parameter (Incidents, Computers, Work Orders, Consumables, SoftwareCatalog, Purchase Order Items, and so on) selects what you're querying. This connector's 4 tools mirror that shape faithfully rather than inventing per-class tools Alloy Navigator's own API doesn't have.
alloy_list_objects - list/search objects of a given object class, with field selection, sorting, paging, free-text search, and per-field filters.alloy_get_object - get every field of a single object by its OID (ticket number) or database record GUID.alloy_get_object_activities - get the activity/history log entries recorded against a single object (status changes, assignment changes, system notes).alloy_get_dictionary - get the allowed reference/classification values (e.g. valid Status or Types values) for a field on an object class.This is a deliberately narrow, read-only v1 surface: 4 `GET` operations covering exactly Alloy Navigator's generic object query, single-object read, activity/history read, and reference-value lookup - nothing else. Alloy Navigator's API User's Guide documents a significantly larger surface built around workflow actions (Alloy Navigator does not create or update objects directly; every mutation runs as a named workflow action against an object). This connector excludes every one of those by design, not by oversight:
Hard-excluded (object creation and mutation - all mutation in Alloy Navigator's API model runs through workflow actions) - never implemented: POST /object/ /action/ - executing a workflow action (the mechanism Alloy Navigator's own "Creating objects" documentation describes for creating new incidents, work orders, assets, and any other object) is a write by definition and is excluded outright, including any workflow action a customer's instance might label as innocuous-sounding (e.g. an "Acknowledge" or "Close" action) - this connector has no way to distinguish a read-flavored action from a real state-changing one, so none are exposed.
Hard-excluded (redundant POST-based retrieval) - never implemented: Alloy Navigator's guide documents POST variants of both the object-list and object-activities GET endpoints (POST / , POST /Activities/ ), intended to work around URL query-length limits when a caller constructs a raw URL by hand. This connector builds every request server-side from structured tool arguments rather than a hand-typed URL, so the length limit the POST variant exists to work around doesn't apply here - implementing it would add a second code path with identical behavior and no read/write distinction of its own, so it's excluded as redundant rather than as a scope boundary.
Hard-excluded (user/session/application administration - identity and credential management, not ITSM/asset data) - never implemented: the technician (username/password) authentication grant (POST /api/token with grant_type=password) - this connector only uses the application-account client_credentials grant, the shape intended for unattended service integrations - and any endpoint for managing application accounts, technician accounts, or sessions themselves.
Hard-excluded (out of ITSM/asset-data scope) - never implemented: GET /api/v2/GetAppConfig - configuration for a registered mobile scanner application (Settings App > Services > Mobile Applications), unrelated to IT asset/ITSM record data and dependent on a customer having registered a mobile app in the first place.
They can be added as a follow-up if there's demand, after a deliberate scope decision - not by default.
npm install
npm run build npm test npm run lint # tsc --noEmit
The image listens on 0.0.0.0 inside the container (MCP_HTTP_HOST) and defaults to AUTH_MODE=gateway. Publish the port on loopback and pass the S2S secret. In gateway mode, Alloy Navigator credentials arrive on each request as X-Alloy-* headers; the image does not read them from the environment.
docker build -t alloy-navigator-mcp .
docker run \ -e CONDUIT_S2S_SECRET="$CONDUIT_S2S_SECRET" \ -p 127.0.0.1:8080:8080 \ alloy-navigator-mcp
Compose refuses to start when CONDUIT_S2S_SECRET is unset, sets AUTH_MODE=gateway, publishes 127.0.0.1:8080:8080, and passes no ALLOY_* variables:
CONDUIT_S2S_SECRET="$CONDUIT_S2S_SECRET" docker compose up
Single-tenant HTTP (AUTH_MODE=env) still requires the S2S secr