World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
MCP server for Cisco Duo's identity/MFA administration API.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 4/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 16/100 |
품질: 기본 점검 2/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Cisco Duo 설치해 줘. https://mcp.popnx.com/i/wyre-ai-cisco-duo-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 2/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
Cisco Duo 키가 필요해요 (제작자 사이트에서 만들기) · 설정 2개 입력 필요 (DUO_IKEY, DUO_API_HOST) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Cisco Duo을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "cisco-duo": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "DUO_IKEY", "-e", "DUO_SKEY", "-e", "DUO_API_HOST", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/cisco-duo-mcp:v1.0.1" ], "env": { "DUO_IKEY": "your-value", "DUO_SKEY": "your-value", "DUO_API_HOST": "your-value", "AUTH_MODE": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) DUO_SKEY, AUTH_MODE, DUO_IKEY, DUO_API_HOST에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Cisco Duo의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
DUO_IKEY Duo 통합 키(v5 서명 요청 방식의 Basic 인증 사용자 이름). 단독으로는 비밀이 아니지만 DUO_SKEY와 함께 사용하면 이 연동으로 인증됩니다. DUO_API_HOST 이 계정의 Duo API 호스트 이름(예: api-xxxxxxxx.duosecurity.com). 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
SettingsDeveloperEdit Config
{
"mcpServers": {
"cisco-duo": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"DUO_IKEY",
"-e",
"DUO_SKEY",
"-e",
"DUO_API_HOST",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/cisco-duo-mcp:v1.0.1"
],
"env": {
"DUO_IKEY": "your-value",
"DUO_SKEY": "your-value",
"DUO_API_HOST": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Cisco Duo을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Cisco Duo을 쓰고 있다고 하거나 답에 Cisco Duo 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT 서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다. LOG_LEVEL 로그 상세 수준: debug, info, warn, error 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Cisco Duo에 연결할 수 없어요
Cisco Duo는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Cisco Duo에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
Cisco Duo 키가 필요해요 (제작자 사이트에서 만들기) · 설정 2개 입력 필요 (DUO_IKEY, DUO_API_HOST) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Cisco Duo을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user cisco-duo --env DUO_IKEY=your-value --env DUO_SKEY=your-value --env DUO_API_HOST=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e DUO_IKEY -e DUO_SKEY -e DUO_API_HOST -e AUTH_MODE ghcr.io/wyre-ai/cisco-duo-mcp:v1.0.1 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) DUO_SKEY, AUTH_MODE, DUO_IKEY, DUO_API_HOST에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Cisco Duo의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
DUO_IKEY Duo 통합 키(v5 서명 요청 방식의 Basic 인증 사용자 이름). 단독으로는 비밀이 아니지만 DUO_SKEY와 함께 사용하면 이 연동으로 인증됩니다. DUO_API_HOST 이 계정의 Duo API 호스트 이름(예: api-xxxxxxxx.duosecurity.com). 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user cisco-duo --env DUO_IKEY=your-value --env DUO_SKEY=your-value --env DUO_API_HOST=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e DUO_IKEY -e DUO_SKEY -e DUO_API_HOST -e AUTH_MODE ghcr.io/wyre-ai/cisco-duo-mcp:v1.0.1Enter 전에 “your-value”를 내 키로 바꾸세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Cisco Duo이 목록에 있고 연결됨으로 보이면 돼요
Cisco Duo을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Cisco Duo을 쓰고 있다고 하거나 답에 Cisco Duo 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT 서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다. LOG_LEVEL 로그 상세 수준: debug, info, warn, error 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
Cisco Duo 키가 필요해요 (제작자 사이트에서 만들기) · 설정 2개 입력 필요 (DUO_IKEY, DUO_API_HOST) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Cisco Duo을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "cisco-duo": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "DUO_IKEY", "-e", "DUO_SKEY", "-e", "DUO_API_HOST", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/cisco-duo-mcp:v1.0.1" ], "env": { "DUO_IKEY": "your-value", "DUO_SKEY": "your-value", "DUO_API_HOST": "your-value", "AUTH_MODE": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) DUO_SKEY, AUTH_MODE, DUO_IKEY, DUO_API_HOST에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Cisco Duo의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
DUO_IKEY Duo 통합 키(v5 서명 요청 방식의 Basic 인증 사용자 이름). 단독으로는 비밀이 아니지만 DUO_SKEY와 함께 사용하면 이 연동으로 인증됩니다. DUO_API_HOST 이 계정의 Duo API 호스트 이름(예: api-xxxxxxxx.duosecurity.com). 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
Cisco Duo 설정에서 DUO_SKEY, AUTH_MODE, DUO_IKEY, DUO_API_HOST가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Cisco Duo을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Cisco Duo을 쓰고 있다고 하거나 답에 Cisco Duo 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT 서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다. LOG_LEVEL 로그 상세 수준: debug, info, warn, error 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
Cisco Duo 키가 필요해요 (제작자 사이트에서 만들기) · 설정 2개 입력 필요 (DUO_IKEY, DUO_API_HOST) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Cisco Duo을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "cisco-duo": { "type": "stdio", "command": "docker", "args": [ "run", "-i", "--rm", "-e", "DUO_IKEY", "-e", "DUO_SKEY", "-e", "DUO_API_HOST", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/cisco-duo-mcp:v1.0.1" ], "env": { "DUO_IKEY": "your-value", "DUO_SKEY": "your-value", "DUO_API_HOST": "your-value", "AUTH_MODE": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) DUO_SKEY, AUTH_MODE, DUO_IKEY, DUO_API_HOST에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Cisco Duo의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
제작자 사이트에서 가입하고 다음 단계에 쓸 API 키를 만드세요. 요금과 무료 요금제는 제작자 사이트에서 확인하세요.
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
DUO_IKEY Duo 통합 키(v5 서명 요청 방식의 Basic 인증 사용자 이름). 단독으로는 비밀이 아니지만 DUO_SKEY와 함께 사용하면 이 연동으로 인증됩니다. DUO_API_HOST 이 계정의 Duo API 호스트 이름(예: api-xxxxxxxx.duosecurity.com). 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
Cisco Duo 설정에서 DUO_SKEY, AUTH_MODE, DUO_IKEY, DUO_API_HOST가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Cisco Duo을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Cisco Duo을 쓰고 있다고 하거나 답에 Cisco Duo 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT 서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다. LOG_LEVEL 로그 상세 수준: debug, info, warn, error 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
Claude Code
claude mcp add --scope user cisco-duo --env DUO_IKEY=your-value --env DUO_SKEY=your-value --env DUO_API_HOST=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e DUO_IKEY -e DUO_SKEY -e DUO_API_HOST -e AUTH_MODE ghcr.io/wyre-ai/cisco-duo-mcp:v1.0.1Claude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"cisco-duo": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"DUO_IKEY",
"-e",
"DUO_SKEY",
"-e",
"DUO_API_HOST",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/cisco-duo-mcp:v1.0.1"
],
"env": {
"DUO_IKEY": "your-value",
"DUO_SKEY": "your-value",
"DUO_API_HOST": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"cisco-duo": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"DUO_IKEY",
"-e",
"DUO_SKEY",
"-e",
"DUO_API_HOST",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/cisco-duo-mcp:v1.0.1"
],
"env": {
"DUO_IKEY": "your-value",
"DUO_SKEY": "your-value",
"DUO_API_HOST": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}VS Code (mcp.json)
{
"servers": {
"cisco-duo": {
"type": "stdio",
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"DUO_IKEY",
"-e",
"DUO_SKEY",
"-e",
"DUO_API_HOST",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/cisco-duo-mcp:v1.0.1"
],
"env": {
"DUO_IKEY": "your-value",
"DUO_SKEY": "your-value",
"DUO_API_HOST": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}DUO_IKEY 필수 envDUO_SKEY 비밀 필수 envDUO_API_HOST 필수 envMCP_TRANSPORT envAUTH_MODE 비밀 필수 envLOG_LEVEL env설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
레지스트리 이름이 GitHub 계정 WYRE-AI 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 6일 전
GitHub가 라이선스 종류를 알아내지 못했어요. 파일을 열어 확인하세요
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/wyre-ai-cisco-duo-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 2개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
입력해야 할 값: DUO_SKEY, AUTH_MODE
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 6일 전 변경됐고, 최신 버전(1.0.1)은 15일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 Cisco Duo | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 예 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 2/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | NOASSERTION | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
MCP server for Cisco Duo's identity/MFA administration API - read-only visibility into users, their enrolled MFA methods, phones, hardware and desktop tokens, groups, integrations, and the authentication/administrator/telephony logs, for AI assistants and the WYRE Conduit gateway.
Duo has no machine-readable OpenAPI spec; every endpoint in this connector was manually verified against Duo's published docs (Admin API, Auth API) and cross-checked against Duo's own reference client, duo_client_python.
Duo authenticates with a signed-request scheme, not OAuth2 and not a bearer token. This connector implements Duo Auth Signature v5 (HMAC-SHA512) - the current recommended method - not the legacy v2 (HMAC-SHA1) scheme.
Three credential fields are required:
| Field | Description |
|---|---|
ikey | Integration key - identifies the integration. Sent as the Basic-auth username. Not secret. |
skey | Secret key - the HMAC-SHA512 signing key. Bearer-equivalent for this integration's admin scope; never sent over the wire itself, never logged. |
apiHost | This account's Duo API hostname, e.g. api-xxxxxxxx.duosecurity.com. Not secret. |
Every request is signed fresh, per call, in src/client.ts's signV5Get(). The 7-line canonical string (date, method, host, path, sorted query params, SHA-512 body hash, SHA-512 signed-headers hash) is joined with \n and HMAC-SHA512-signed with skey; the hex signature is sent as Authorization: Basic base64(ikey:signature) alongside a Date header carrying the exact same RFC 2822 timestamp that was signed. This connector is GET-only, so the body hash is always the digest of the empty string, and no additional X-Duo-* signed headers are used, so the header hash is always the digest of the empty string too.
In gateway mode the three fields arrive per-request via X-Duo-Ikey / X-Duo-Skey / X-Duo-Api-Host headers, injected by the Conduit gateway. In local/stdio mode they're read once from DUO_IKEY / DUO_SKEY / DUO_API_HOST.
What the credential itself can do vs. what this connector calls. This connector's code is read-only by construction (see Scope, below), but that describes this codebase, not Duo's server-side enforcement. Duo Admin API integrations carry their own independently-configured permission grants (Grant Read Resource, Grant Write Resource, Grant Read Log, Grant Read Settings, Grant Write Settings, etc., set in the Duo Admin Panel when the integration is created) and Duo does enforce these server-side - an integration without Grant Write Resource gets a real authorization error from Duo itself on any write attempt, confirmed against Duo's docs and community reports of exactly that failure mode. This connector never exercises anything beyond read permissions, but the ikey/skey pair a customer supplies is only as narrowly scoped as the permissions they granted that integration in Duo - if a customer grants this integration Grant Write Resource (unnecessary for this connector), the credential itself would be capable of writes even though this connector's code never calls one. Recommend granting this integration only `Grant Read Resource` (and `Grant Read Log` if the log tools are wanted) in Duo's Admin Panel - least-privilege at the credential level, on top of this connector's own code-level restriction.
Defensive field-stripping: Duo's Integrations endpoints are known to echo secret-shaped fields in some read responses, and the API has no machine-readable schema to verify this exhaustively per integration type. Every response from every tool in this connector - not just Integrations - passes through stripSecretFields() before it ever reaches the model: any object key matching /secret|skey/i, at any depth, is dropped. This is a blanket safety net on top of, not instead of, the endpoint-level exclusions below.
| Env var | Description | |||
|---|---|---|---|---|
DUO_IKEY | Duo integration key. | |||
DUO_SKEY | Duo secret key (HMAC-SHA512 signing secret). | |||
DUO_API_HOST | This account's Duo API hostname. | |||
MCP_TRANSPORT | stdio (default) or http. | |||
AUTH_MODE | env (default, reads the vars above) or gateway (credentials arrive per-request via X-Duo-Ikey/X-Duo-Skey/X-Duo-Api-Host headers, injected by the Conduit gateway). | |||
CONDUIT_S2S_SECRET | When set, the HTTP transport requires a valid X-Gateway-S2S header (Conduit sidecar auth) on every /mcp request. | |||
LOG_LEVEL | debug \ | info (default) \ | warn \ | error. |
X-Gateway-S2S check passes, a Content-Length above the cap returns 413 with a JSON-RPC error; bodies without Content-Length are capped by the MCP SDK transport. Unauthenticated requests still get 401 first.tools/call arguments are capped at 10,000 elements (every array item and object key at any depth). Larger inputs return an isError tool result and are never dispatched.These limits address CVE-2026-111768 / GHSA-46jr-4wx8-v453 (memory exhaustion during validation) and GHSA-f897-62hf-6gxq (no request body / batch cap).
All 22 tools are read-only and classified isAdmin: true in Conduit's VENDOR_TOOL_CONFIG regardless of verb - this is identity/MFA administration data (PII: phone numbers, email, device OS, and enrolled-factor details), sensitive even as a plain read.
duo_list_users - list users, optionally filtered by exact username.duo_get_user - get full detail for a user.duo_list_user_groups - list the groups a user belongs to.duo_list_user_phones - list the phones enrolled to a user.duo_list_user_tokens - list the hardware tokens enrolled to a user.duo_list_user_webauthn_credentials - list a user's WebAuthn credentials.duo_list_user_u2f_tokens - list a user's legacy U2F security keys.duo_list_phones - list phones, optionally filtered by number/extension.duo_get_phone - get full detail for a phone.duo_list_hardware_tokens - list hardware tokens (HOTP/TOTP/YubiKey).duo_get_hardware_token - get full detail for a hardware token.duo_list_desktop_tokens - list Duo Desktop tokens.duo_get_desktop_token - get full detail for a Duo Desktop token.duo_list_groups - list groups.duo_get_group - get full detail for a group.duo_list_group_users - list the users belonging to a group.duo_list_integrations - list configured integrations.duo_get_integration - get full metadata for an integration.duo_get_authentication_log - the authentication log (v2), time-filterable.duo_get_administrator_log - the administrator action log (v1).duo_get_telephony_log - the telephony (call/SMS credit) log (v2).duo_check_credentials - validate credentials and Auth API connectivity. Side-effect-free; does not initiate any MFA transaction.This is a deliberately narrow, read-only v1 surface, built for an identity/MFA administration product where the wrong endpoint is unusually consequential. src/client.ts implements exactly one HTTP verb function (doGet) - there is no doPost/doPut/doDelete anywhere in this codebase, so every exclusion below is structurally enforced, not just documented. src/__tests__/tool-set.test.ts pins the exact 22-tool set and asserts no tool name matches /bypass|delete|disassociate|deactivate|revoke|enroll/i.
Hard-excluded (credential-exposing) - never implemented:
GET /admin/v1/users/{user_id}/bypass_codes (get_user_bypass_codes) - returns live, usable MFA-bypass codes. Even as a read, this is the single most sensitive primitive in the API and is excluded alongside its generator, not treated as a safe list/detail read.POST /admin/v1/users/{user_id}/bypass_codes (add_user_bypass_codes) - generates bypass codes.Hard-excluded (provisioning/mutation) - never implemented:
DELETE /admin/v1/users/{user_id}, DELETE /admin/v1/phones/{phone_id}, DELETE /admin/v1/tokens/{token_id}, DELETE /admin/v1/desktoptokens/{desktoptoken_id}, DELETE /admin/v1/groups/{group_id}, DELETE /admin/v3/integrations/{integration_key} - all object deletes.DELETE /admin/v1/users/{user_id}/phones/{phone_id} (delete_user_phone), DELETE /admin/v1/users/{user_id}/tokens/{token_id} (delete_user_token) - disassociate operations.POST /admin/v1/users/{user_id}/phones (add_user_phone), POST /admin/v1/users/{user_id}/tokens (add_user_token) - associate operations.POST /admin/v1/users, POST /admin/v1/phones, POST /admin/v1/tokens (all add_*_token variants), POST /admin/v1/desktoptokens, POST /admin/v1/groups, POST /admin/v3/integrations - all object creates.POST/PUT update endpoints for every object type above (update_phone, update_token, resync_hotp_token, update_desktoptoken, activate_desktoptoken, update_group, integration config updates) and any policy-write endpoint (POST /admin/v1/settings).POST /auth/v2/preauth, POST /auth/v2/auth, POST /auth/v2/enroll, POST /auth/v2/enroll_status - Auth API endpoints that trigger a real user-facing MFA transaction or create an identity.Out of v1 scope (not credential/provisioning, just not part of this connector's read surface - could be added later as a deliberate follow-up):
GET /auth/v2/ping - unauthenticated API liveness check, no admin-relevant data.GET /auth/v2/auth_status - a poll for a live /auth transaction's status; no standalone utility without the excluded /auth//preauth endpoints.GET /admin/v1/admins - the Duo administrator roster (distinct from end-user accounts). Not part of the task's requested tool categories (user/phone/token/group listing+detail, logs, integration metadata, auth-status checks).GET /admin/v1/billing/*, GET /admin/v1/info/summary, GET /admin/v1/settings - account summary/billing/settings reads.GET /admin/v1/users/directorysync - directory sync listing.mkey/skey credential pair scoped per management-system integration, a different credential model than the account-level ikey/skey this connector is built around. Not implemented in v1; would need its own deliberate credential-shape decision if added.They can be added as a follow-up if there's demand, after a deliberate scope decision - not by default.
npm install
npm run build npm test npm run lint # tsc --noEmit
docker build -t cisco-duo-mcp .
docker run -p 8080:8080 -e DUO_IKEY=... -e DUO_SKEY=... -e DUO_API_HOST=... cisco-duo-mcp