World Monitor
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
MCP server for Hudu IT documentation — companies, assets, articles, passwords, and procedures.
목록은 사용 점수(100점 만점)로 정렬되며 구성은 다음과 같습니다
| 인기 | 7/80 | GitHub 별 또는 주간 다운로드: 큰 쪽 60, 작은 쪽 20 |
|---|---|---|
| 최신성 | 12/12 | 30일 안에 릴리스나 코드 변경이 있으면 만점 |
| 응답 중 | 0/8 | 마지막 점검 때 클라우드 엔드포인트가 응답 |
| 사용 점수 | 19/100 |
품질: 기본 점검 3/3개 통과(표시만, 정렬에는 안 씀) · 상승세: 데이터 없음 (급상승 탭에서만 사용)
쓰고 있는 AI 앱을 고른 다음 설정을 복사하세요.
한 문장으로 AI에게 설치 맡기기
Hudu 설치해 줘. https://mcp.popnx.com/i/wyre-ai-hudu-mcp.md 를 따라 하고, 명령을 먼저 보여 주고 내가 승인하면 실행해.내 컴퓨터에서 작업하는 AI(Claude Code, Cursor 등)에 붙여 넣으세요. 단계를 읽고 명령을 보여 준 뒤 승인을 기다립니다. 키도 가입도 필요 없습니다. · AI가 읽을 전체 내용 보기
검사 3/3 통과 · 내 컴퓨터에서 실행돼요 · ✓ 명령 확인 2026년 11월 14일
먼저: 어떤 AI를 쓰시나요?
쓰는 앱을 고르면 아래에 단계가 나옵니다.
Claude에 연결할 수 있지만 먼저 준비가 필요해요
Hudu 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (HUDU_BASE_URL) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만) · 컴퓨터용 Claude 앱(Windows 또는 Mac)에서만 되고 웹이나 모바일은 안 돼요
이 메시지를 Claude 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude에 MCP server Hudu을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "hudu": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "HUDU_API_KEY", "-e", "HUDU_BASE_URL", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/hudu-mcp:v1.4.4" ], "env": { "HUDU_API_KEY": "your-value", "HUDU_BASE_URL": "your-value", "AUTH_MODE": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) HUDU_API_KEY, AUTH_MODE, HUDU_BASE_URL에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Hudu의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
HUDU_BASE_URL Hudu 인스턴스 기본 URL(예: https://yourcompany.huducloud.com) 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
SettingsDeveloperEdit Config
{
"mcpServers": {
"hudu": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"HUDU_API_KEY",
"-e",
"HUDU_BASE_URL",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/hudu-mcp:v1.4.4"
],
"env": {
"HUDU_API_KEY": "your-value",
"HUDU_BASE_URL": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Hudu을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude가 Hudu을 쓰고 있다고 하거나 답에 Hudu 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT 서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다. LOG_LEVEL 로그 상세 수준: debug, info, warn, error 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
ChatGPT는 아직 Hudu에 연결할 수 없어요
Hudu는 내 컴퓨터에 설치해서 쓰지만 ChatGPT는 웹에서 도는 서버만 연결할 수 있어요
A · Hudu에 연결되는 앱 쓰기
B · 기타에서 ChatGPT에 연결되는 다른 서버
같은 분류에서 많이 쓰는 것 중 키 없이 주소만으로 연결되는 것을 골랐어요
Claude Code에 연결할 수 있지만 먼저 준비가 필요해요
Hudu 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (HUDU_BASE_URL) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 Claude Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Claude Code에 MCP server Hudu을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): claude mcp add --scope user hudu --env HUDU_API_KEY=your-value --env HUDU_BASE_URL=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e HUDU_API_KEY -e HUDU_BASE_URL -e AUTH_MODE ghcr.io/wyre-ai/hudu-mcp:v1.4.4 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) HUDU_API_KEY, AUTH_MODE, HUDU_BASE_URL에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Hudu의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
HUDU_BASE_URL Hudu 인스턴스 기본 URL(예: https://yourcompany.huducloud.com) 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
Mac: Command+스페이스를 누르고 Terminal 입력 · Windows: PowerShell 열기
claude mcp add --scope user hudu --env HUDU_API_KEY=your-value --env HUDU_BASE_URL=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e HUDU_API_KEY -e HUDU_BASE_URL -e AUTH_MODE ghcr.io/wyre-ai/hudu-mcp:v1.4.4Enter 전에 “your-value”를 내 키로 바꾸세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Hudu이 목록에 있고 연결됨으로 보이면 돼요
Hudu을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Claude Code가 Hudu을 쓰고 있다고 하거나 답에 Hudu 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT 서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다. LOG_LEVEL 로그 상세 수준: debug, info, warn, error 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Anthropic 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Cursor에 연결할 수 있지만 먼저 준비가 필요해요
Hudu 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (HUDU_BASE_URL) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 Cursor 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 Cursor에 MCP server Hudu을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "mcpServers": { "hudu": { "command": "docker", "args": [ "run", "-i", "--rm", "-e", "HUDU_API_KEY", "-e", "HUDU_BASE_URL", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/hudu-mcp:v1.4.4" ], "env": { "HUDU_API_KEY": "your-value", "HUDU_BASE_URL": "your-value", "AUTH_MODE": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) HUDU_API_KEY, AUTH_MODE, HUDU_BASE_URL에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Hudu의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
HUDU_BASE_URL Hudu 인스턴스 기본 URL(예: https://yourcompany.huducloud.com) 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
Hudu 설정에서 HUDU_API_KEY, AUTH_MODE, HUDU_BASE_URL가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Hudu을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ Cursor가 Hudu을 쓰고 있다고 하거나 답에 Hudu 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT 서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다. LOG_LEVEL 로그 상세 수준: debug, info, warn, error 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 Cursor 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
VS Code에 연결할 수 있지만 먼저 준비가 필요해요
Hudu 키가 필요해요 (제작자 사이트에서 만들기) · 설정 1개 입력 필요 (HUDU_BASE_URL) · 먼저 컴퓨터에 Docker를 설치하세요 (한 번만)
이 메시지를 VS Code 채팅에 붙여 넣으세요. AI가 컴퓨터를 확인하고 어떤 파일을 바꿀지 알려 준 뒤 매번 동의를 기다립니다.
이 컴퓨터의 VS Code에 MCP server Hudu을 설치해 주세요. 순서대로: 1) docker --version로 Docker가 있는지 확인. 없으면 https://www.docker.com/products/docker-desktop/에서 설치하라고 알려 주고 직접 설치하지 마세요. 2) 이 설정만 사용하세요(PopNx MCP 확인 완료): { "servers": { "hudu": { "type": "stdio", "command": "docker", "args": [ "run", "-i", "--rm", "-e", "HUDU_API_KEY", "-e", "HUDU_BASE_URL", "-e", "AUTH_MODE", "ghcr.io/wyre-ai/hudu-mcp:v1.4.4" ], "env": { "HUDU_API_KEY": "your-value", "HUDU_BASE_URL": "your-value", "AUTH_MODE": "your-value" } } } } 3) 바꿀 파일의 전체 경로나 실행할 명령을 알려 주고 제 동의를 기다리세요. 4) HUDU_API_KEY, AUTH_MODE, HUDU_BASE_URL에는 "your-value"를 그대로 두고, 실제 값은 제가 파일이나 앱 입력란에 직접 붙여 넣도록 안내하세요. 채팅에 키를 입력하라고 하지 마세요. 5) 합의한 대로 실행한 뒤 Hudu의 도구가 실제로 보이는지 확인하세요.이 메시지에는 키가 없습니다. 키가 필요하면 AI가 파일이나 앱 입력란에 직접 붙여 넣으라고 안내합니다.
이미 설치했나요? 먼저 확인 · 터미널을 열고 이 명령을 입력한 뒤 Enter
docker --versionMac: ⌘ + Space를 누르고 Terminal 입력 후 Enter
Windows: 시작 메뉴를 열고 Windows PowerShell 입력 후 "열기"
아직 설치하지 않았다면: Docker Desktop 설치: Mac은 Docker.dmg를 열고 아이콘을 "응용 프로그램"으로 드래그(Mac에 맞게 Apple silicon 또는 Intel 선택) · Windows는 Docker Desktop Installer.exe 더블클릭 · 설치 후 Docker Desktop 앱을 열어 두세요. curl 명령은 필요 없습니다
설치가 끝나면 터미널을 닫았다가 다시 열고 같은 명령을 실행하세요. 버전 번호가 나와야 합니다: docker --version
한 번 설치하면 Docker가 필요한 모든 도구에서 쓸 수 있습니다
이것은 프로그램 설정이며 키가 아닙니다. 가입할 필요 없이 제작자 설명대로 입력하세요.
HUDU_BASE_URL Hudu 인스턴스 기본 URL(예: https://yourcompany.huducloud.com) 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
Hudu 설정에서 HUDU_API_KEY, AUTH_MODE, HUDU_BASE_URL가 비어 있어요. 내 키를 넣고 저장하세요
키는 앱 입력란에만 붙여 넣고, 채팅에 붙이거나 다른 사람에게 보내지 마세요
Hudu을 써서 나에게 무엇을 해 줄 수 있는지 알려 주고, 하나 해 봐✓ VS Code가 Hudu을 쓰고 있다고 하거나 답에 Hudu 도구 이름이 나오면 연결된 거예요
위 명령은 이 값들 없이도 동작합니다. 바꾸고 싶을 때만 제작자 설명대로 추가하세요.
MCP_TRANSPORT 서버의 전송 모드. 로컬 CLI 사용 시 'stdio'로 설정합니다. 이미지는 게이트웨이 호스팅을 위해 기본값이 'http'입니다. LOG_LEVEL 로그 상세 수준: debug, info, warn, error 설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
메뉴 이름은 2026년 11월 11일에 VS Code 도움말에서 확인 · 앱 버전에 따라 화면이 조금 다를 수 있어요
Windsurf, Zed, Gemini CLI 같은 다른 MCP 앱은 추가 방법이 저마다 달라요. 앱 목록에서 확인하세요
JSON 설정은 아래 “개발자용”에 있어요
Claude Code
claude mcp add --scope user hudu --env HUDU_API_KEY=your-value --env HUDU_BASE_URL=your-value --env AUTH_MODE=your-value -- docker run -i --rm -e HUDU_API_KEY -e HUDU_BASE_URL -e AUTH_MODE ghcr.io/wyre-ai/hudu-mcp:v1.4.4Claude Desktop (claude_desktop_config.json)
{
"mcpServers": {
"hudu": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"HUDU_API_KEY",
"-e",
"HUDU_BASE_URL",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/hudu-mcp:v1.4.4"
],
"env": {
"HUDU_API_KEY": "your-value",
"HUDU_BASE_URL": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}Cursor (~/.cursor/mcp.json)
{
"mcpServers": {
"hudu": {
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"HUDU_API_KEY",
"-e",
"HUDU_BASE_URL",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/hudu-mcp:v1.4.4"
],
"env": {
"HUDU_API_KEY": "your-value",
"HUDU_BASE_URL": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}VS Code (mcp.json)
{
"servers": {
"hudu": {
"type": "stdio",
"command": "docker",
"args": [
"run",
"-i",
"--rm",
"-e",
"HUDU_API_KEY",
"-e",
"HUDU_BASE_URL",
"-e",
"AUTH_MODE",
"ghcr.io/wyre-ai/hudu-mcp:v1.4.4"
],
"env": {
"HUDU_API_KEY": "your-value",
"HUDU_BASE_URL": "your-value",
"AUTH_MODE": "your-value"
}
}
}
}HUDU_API_KEY 비밀 필수 envHUDU_BASE_URL 필수 envMCP_TRANSPORT envAUTH_MODE 비밀 필수 envLOG_LEVEL env설명은 자동 번역이며 변수 이름은 원문 그대로입니다. 확실하지 않으면 원문을 확인하세요.
이 설정은 제작자의 레지스트리 정보로 만들었어요. README와 다르면 README를 따르세요.
이 서버의 연결 방식과 각 앱의 공식 문서를 바탕으로 했어요. 2026년 11월 10일 확인.
내 컴퓨터에서 실행하는 앱
ClaudeGooseLM StudioMsty StudioCherry StudioCursorVS Code + GitHub CopilotVisual StudioWindsurf (Devin Desktop)ZedKiroClineContinueJetBrains AI AssistantClaude CodeCodex CLIGemini CLIOpenCodenodecodeWarpLibreChatRaycast
내 컴퓨터에서 실행돼요. 설치하면 AI 앱에 도구 목록이 나타나요.
누구나 볼 수 있는 정보를 점검했고, 코드는 읽지 않았어요. 해당하지 않는 항목은 개수에서 뺐어요. · 2026년 11월 19일 점검
레지스트리 이름이 GitHub 계정 WYRE-AI 기준으로 확인되었고, 이 계정이 저장소를 소유하고 있어요
코드 마지막 변경: 3일 전
Apache-2.0 사용
내 컴퓨터에서 실행되는 서버라 인터넷 엔드포인트가 없어요
내 컴퓨터에서 실행되며, 대신 로컬 설정을 사용해요
내 컴퓨터에서 실행돼요. 도구 목록은 인터넷 엔드포인트가 있는 서버에서만 읽을 수 있어요
제작자라면 이 코드를 README에 붙여 넣으세요. 배지는 이 페이지로 연결됩니다.
[](https://mcp.popnx.com/en/servers/wyre-ai-hudu-mcp)질문하고, 팁을 나누고, 안 되는 점을 알려 주세요. "도움이 됨"이 많은 순서예요.
아직 리뷰가 없어요
레지스트리에서 이 카테고리의 활성 서버 전체와 비교했어요. 스타는 게시자가 저장소를 소유한 경우에만 세요.
해당하는 기본 점검 3개 중 3개를 통과했어요. 코드는 읽지 않았어요. 키나 토큰을 넣기 전에 서버가 어떤 권한을 요구하는지 확인하고, 꼭 필요한 권한만 있는 키를 쓰세요.
입력해야 할 값: HUDU_API_KEY, AUTH_MODE
내 컴퓨터에서 실행돼요. AI 앱이 필요할 때 실행하고, 데이터는 제작자의 서버를 거치지 않아요(서버 자체가 온라인 서비스를 호출하는 경우는 제외).
GitHub 저장소는 마지막으로 3일 전 변경됐고, 최신 버전(1.4.4)은 30일 전 레지스트리에 올라왔어요.
Claude Desktop, Claude Code, Cursor, VS Code처럼 MCP를 지원하는 앱에서 쓸 수 있어요. 내 컴퓨터에 Docker도 있어야 해요.
같은 카테고리에는: World Monitor, openstatus, Oh My Posh Validator, Strata, Jitsu
같은 카테고리, 다른 제작자, 명령 확인 완료. 공식이 먼저, 그다음 스타 순.
카드 보는 법:↓ 주간 다운로드i★ GitHub 스타i세 기둥: 리뷰 · 점검 · 사용 정도i업데이트 = 최신 버전을 레지스트리에 공개한 날i
Real-time global intelligence on conflict, markets, energy, trade, shipping and cyber. 100 tools.
Manage monitors, status pages, incidents and maintenances in your openstatus workspace.
Validate oh-my-posh configurations and segment snippets against the official schema.
MCP server for progressive tool usage at any scale (see https://klavis.ai)
Manage Jitsu data pipelines: destinations, streams, connections, functions, live events.
| 이 항목 Hudu | World Monitor | openstatus | Oh My Posh Validator | Strata | Jitsu | |
|---|---|---|---|---|---|---|
| 실행 위치 | 컴퓨터에 설치 필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 | 클라우드에서 동작, 설치 불필요 |
| 키 필요 | 예 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| Claude에서 +로 추가 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 | 아니요 |
| 기본 점검 | 3/3 | 4/4 | 4/4 | 4/4 | 1/4 | 4/4 |
| 라이선스 | Apache-2.0 | AGPL-3.0 | AGPL-3.0 | MIT | Apache-2.0 | MIT |
| 가격 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 | 등록 정보에 비용 없음 |
제작자의 저장소에서 쓰인 그대로 가져왔어요. PopNx MCP가 검토하거나 보증한 내용이 아니에요. HTML, 이미지, 스크립트는 제거했어요. 링크를 누르면 이 사이트를 벗어나요.
MCP (Model Context Protocol) server for Hudu IT documentation platform. Provides 39 tools and 6 resources for managing companies, assets, articles, passwords, websites, and more through any MCP-compatible client.
HUDU_API_KEY REST access, or oauth — a thin, authenticated proxy to a newer Hudu instance's own native MCP server[!IMPORTANT]
Before you click: this server depends on
@wyre-technology/node-hudu,
which is hosted on the GitHub Packages npm registry. GitHub Packages has no
anonymous access — even though the package is public, every
npm installneeds a
token. The cloud builder runs
npm installfor you, so you must give it one, or
the build fails with
npm error 401 Unauthorized ... npm.pkg.github.com.
1. Create a GitHub Personal Access Token with the
read:packagesscope
Any GitHub account works — you do not need to be a member of the
wyre-technologyorg to read its public packages.
2. Add it as a build variable when prompted by the deploy flow:
- DigitalOcean App Platform → set an encrypted env var named `NODE_AUTH_TOKEN`
with scope Build Time to your PAT (the
Dockerfilereads it via
ARG NODE_AUTH_TOKENto authenticatenpm ci).
- Cloudflare Workers → set a build variable named `NODE_AUTH_TOKEN` to your PAT
(Workers → Settings → Build → Variables and Secrets).
[!NOTE]
The DigitalOcean target builds the full Docker image and runs the complete MCP
server over HTTP — this is the recommended path for operators. This repo does not
ship a
wrangler.json/Workers entrypoint, so for a self-hosted server prefer
DigitalOcean or the prebuilt container image (
ghcr.io/wyre-ai/hudu-mcp).
This project depends on @wyre-technology/node-hudu, published to the GitHub Packages npm registry, which requires a token even for public packages. Authenticate npm once before installing:
git clone https://github.com/WYRE-AI/hudu-mcp.git
cd hudu-mcp
export NODE_AUTH_TOKEN=$(gh auth token) # or a PAT with read:packages
npm install npm run build
The repo's .npmrc already points the @wyre-technology scope at GitHub Packages and reads the token from NODE_AUTH_TOKEN, so no further config is needed.
| Variable | Required | Default | Description |
|---|---|---|---|
HUDU_BASE_URL | Yes | - | Your Hudu instance URL (e.g., https://docs.example.com) |
HUDU_API_KEY | No | - | Your Hudu API key. Setting this selects api_key auth mode (see below); omitting it defaults to oauth mode. |
HUDU_AUTH_MODE | No | auto-detected | Explicitly force api_key or oauth. Overrides the auto-detection below. |
MCP_TRANSPORT | No | stdio | Transport type: stdio or http |
AUTH_MODE | No | env | env reads HUDU_* from the environment. gateway requires X-Hudu-Base-URL and X-Hudu-API-Key on each /mcp request and does not fall back to those variables. |
CONDUIT_S2S_SECRET | Yes for HTTP | - | Service-to-service secret. HTTP logs an error and exits non-zero when this is empty or a known placeholder (changeme, secret, replace-me, your-s2s-secret, and the other example values). Generate one with openssl rand -hex 32. Never commit a real value. The value is never logged. |
MCP_ALLOW_INSECURE_DEV | No | - | Set to exactly 1 only for local development to start HTTP without CONDUIT_S2S_SECRET. The process logs a warning, does not enforce X-Gateway-S2S, and binds 127.0.0.1 only. A non-loopback MCP_HTTP_HOST is ignored and the override is logged. A known placeholder secret still refuses to start. |
MCP_HTTP_PORT | No | 8080 | HTTP server port (when using http transport) |
MCP_HTTP_HOST | No | 127.0.0.1 | Bind address when a real CONDUIT_S2S_SECRET is set. The container image sets 0.0.0.0. Without a real secret the listener is forced to 127.0.0.1. |
MCP_SERVER_NAME | No | hudu-mcp | Server name reported to MCP clients |
MCP_SERVER_VERSION | No | 1.0.0 | Server version reported to MCP clients |
LOG_LEVEL | No | info | Log level: error, warn, info, debug |
LOG_FORMAT | No | simple | Log format: json or simple |
This server talks to Hudu in one of two ways. `HUDU_AUTH_MODE` picks between them; if it's unset, the mode is auto-detected from whether HUDU_API_KEY is set:
HUDU_API_KEY is set) — the classic mode. This server calls Hudu's REST API directly via @wyre-technology/node-hudu and implements all 39 tools itself, exactly as before. This is the mode every existing deployment already uses, and it is 100% unchanged and unaffected by everything below.HUDU_API_KEY is not set) — for newer Hudu instances that expose their own native MCP server (Hudu Admin -> External Apps -> MCP), protected by interactive OAuth rather than a static API key. In this mode hudu-mcp does not reimplement any tools; it acts as a thin, authenticated proxy that forwards MCP requests straight through to {HUDU_BASE_URL}/mcp and relays the responses back, so you automatically get whatever tool surface that Hudu instance exposes.The OAuth flow (RFC 9728/8414 discovery, RFC 7591 Dynamic Client Registration, PKCE authorization_code, no client secret — this is a public client) runs the first time a request needs a token:
hudu-mcp discovers the instance's OAuth metadata from {HUDU_BASE_URL}/.well-known/oauth-protected-resource/mcp and {HUDU_BASE_URL}/.well-known/oauth-authorization-server.client_id is cached).http://127.0.0.1: /callback catches the redirect and exchanges the code for tokens.~/.hudu-mcp/credentials- .json (file mode 0600), and transparently refreshed on later runs — you should only see the browser prompt again if the refresh token itself expires or is revoked.Because this flow needs a browser that can reach a callback server bound to 127.0.0.1 on the machine running hudu-mcp, it works for stdio (always local to the calling MCP client) and for a self-hosted http transport running on the same machine you're browsing from — e.g. local testing on localhost:8080. It does not work for an http transport deployed to a remote host you don't have browser-level access to (a cloud VM, a container, etc.): your browser can't reach that machine's own loopback interface to complete the redirect, so the first-run authorization would hang. This is unrelated to gateway mode (AUTH_MODE=gateway), which is a stateless multi-tenant proxy with credentials injected per request via headers and has no single user to run a browser flow for at all — setting HUDU_AUTH_MODE=oauth together with AUTH_MODE=gateway is a startup error.
HTTP transport (both api_key and oauth) also requires CONDUIT_S2S_SECRET or MCP_ALLOW_INSECURE_DEV=1. The dev flag binds 127.0.0.1 only. See HTTP authentication. The stdio transport does not use CONDUIT_S2S_SECRET.
Add to your claude_desktop_config.json:
{
"mcpServers": { "hudu": { "command": "node", "args": ["/path/to/hudu-mcp/dist/entry.js"], "env": { "HUDU_BASE_URL": "https://docs.example.com", "HUDU_API_KEY": "your-api-key" } } } }
For a newer Hudu instance with its own native MCP server (see Authentication modes), omit HUDU_API_KEY and only set HUDU_BASE_URL — hudu-mcp will print an authorization URL to the terminal the first time it's launched:
{
"mcpServers": { "hudu": { "command": "node", "args": ["/path/to/hudu-mcp/dist/entry.js"], "env": { "HUDU_BASE_URL": "https://docs.example.com" } } } }
/health stays unauthenticated and does not read credentials.
CONDUIT_S2S_SECRET="$CONDUIT_S2S_SECRET" \
HUDU_BASE_URL=https://docs.example.com \ HUDU_API_KEY=your-api-key \ MCP_TRANSPORT=http \ MCP_HTTP_PORT=8080 \ npm start
Local HTTP without a service-to-service secret is development-only. It binds 127.0.0.1 and logs a warning:
MCP_TRANSPORT=http MCP_ALLOW_INSECURE_DEV=1 npm start
With MCP_TRANSPORT=http and a real CONDUIT_S2S_SECRET, every /mcp request must include X-Gateway-S2S. The check is verifyS2sHeader in src/mcp/s2s-verify.ts: the header value is t= ,v1= , where the hex is HMAC-SHA256 of the literal string t= keyed with CONDUIT_S2S_SECRET (64 lowercase hex characters). The timestamp must be within 300 seconds of the server clock. A missing or invalid header is HTTP 401, before Hudu credentials are read.
TS=$(date +%s)
SIG=$(printf 't=%s' "$TS" | openssl dgst -sha256 -hmac "$CONDUIT_S2S_SECRET" -hex | awk '{print $NF}') curl -sS http://127.0.0.1:8080/mcp \ -H 'Content-Type: application/json' \ -H 'Accept: application/json, text/event-stream' \ -H "X-Gateway-S2S: t=${TS},v1=${SIG}" \ -H "X-Hudu-Base-URL: $HUDU_BASE_URL" \ -H "X-Hudu-API-Key: $HUDU_API_KEY" \ -d '{"jsonrpc":"2.0","id":1,"method":"tools/list","params":{}}'
In AUTH_MODE=gateway, /mcp also requires X-Hudu-Base-URL and X-Hudu-API-Key. Those headers are the only credential source for that request. A missing header is HTTP 401 and does not fall back to HUDU_BASE_URL or HUDU_API_KEY in the environment.
Compose refuses to start when CONDUIT_S2S_SECRET is unset. The gateway service sets AUTH_MODE=gateway, does not inject HUDU_BASE_URL or HUDU_API_KEY, and publishes 127.0.0.1:8080:8080:
CONDUIT_S2S_SECRET=your-s2s-secret docker compose up
The image listens on 0.0.0.0 inside the container and still refuses to start without a real secret. Publish the port on loopback:
docker run \
-e CONDUIT_S2S_SECRET=your-s2s-secret \ -e AUTH_MODE=gateway \ -p 127.0.0.1:8080:8080 \ ghcr.io/wyre-ai/hudu-mcp
| Tool | Description |
|---|---|
hudu_list_companies | List companies with optional filters |
| hudu_get_company | Get a compan